Where to Buy Lab Consumables in Ontario: Case Sizes and Supplier Checks
An Ontario water laboratory bought plates, tubes and specimen containers from three suppliers, each line added by whoever needed it that month. A purchasing review asked how many cases of each the building uses a year. Three people gave three answers, and the order history could not settle it: one supplier quoted per bag, the others per case.
What counts as a lab consumable when an Ontario lab orders by the case?
The 100 x 15 mm polystyrene petri dish, 320 per case is where most benches start, and it sets the pattern: the case count and the working unit are not the same number, so write both on one sheet.
| Line | How it is packed | Units per case | Used for |
|---|---|---|---|
| Petri dish 100 x 15 mm | 320 per case | 320 | Pour-and-read plates |
| Centrifuge tube 15 mL | 20 bags of 25 | 500 | Sample prep |
| Centrifuge tube 50 mL | 500 per case | 500 | Larger working volumes |
| Specimen container 120 mL | 2 x 100 pack | 200 | Primary receptacle |
| Specimen cup 90 mL | 6 bags of 100 | 600 | Urine collection |
Which case sizes do Ontario labs actually order?

The two tube sizes show why the bench, not the storeroom, decides. The 15 mL centrifuge tubes, 500 per case and the 50 mL tubes share a cap thread and resin, so the choice is working volume, and most benches hold both. The 120 mL screw-cap specimen container, 200 per case sits on the collection side, where the closure matters more than the count, and the 90 mL graduated specimen cups, 600 per case cover the urine bench, where a moulded graduation saves a cylinder.
Does an Ontario laboratory need a licence to buy consumables?
No, and this is where buyers lose time. The Laboratory and Specimen Collection Centre Licensing Act (R.S.O. 1990, c. L.1) licenses the facility, meaning the laboratory or collection centre, not the goods. A box of plates carries no provincial licence of its own. What a consumable can be checked for is narrower: the lot number on the carton, the material stated on the pack, and whether a delivery traces back to a manufacturing lot.
Is ISO 15189 a lab requirement or a supplier requirement?

A lab requirement, and arguing otherwise wastes a tender. ISO 15189:2022 sets out what a medical laboratory's own quality and competence system must do, so the certificate is held by the lab, not by the company shipping it tubes. Ask the supplier the useful version instead: what record links this case to a manufacturing lot, and how long is it kept.
Which supplier checks matter before the first Ontario order?
- The lot number and the format printed on the carton, matched to the purchase order
- Bag count against case count, which is where invoices and deliveries part company
- Transit time in writing, because a bench that runs out mid-week does not wait for a backorder
- A named contact for traceability requests, rather than a general inbox
Ordering for a lab or a hospital group? Wholesale and multi-site ordering covers case pricing and account setup, and the B2B wholesale collection lists the lines stocked for institutional buyers. Reselling? become a distributor.
Running a diagnostic laboratory? See our diagnostic laboratory supplies.
How do you convert bench workload into cases per month?
Start at the test, not at the shelf. A bench running 300 plate counts a week uses 1,290 dishes a month, so four cases of 320 with a little in hand. Add the repeats, because a contaminated plate is poured again, and set the reorder point at the case level, which is what ships and what the invoice prices.
References
- Laboratory and Specimen Collection Centre Licensing Act, R.S.O. 1990, c. L.1 — Ontario e-Laws (current consolidation, checked 1 November 2026) (checked 31 October 2026)
- ISO 15189:2022 — Medical laboratories, requirements for quality and competence (checked 31 October 2026)
Printable companion: the clinic supply planner converts tests per week into cases per month, which is the sheet a purchasing officer signs off on.
Want the arithmetic for a specific bench? The supply and cost planner prints a reorder plan line by line.
Related Reading
- Where to Buy Centrifuge Tubes in Quebec: Case Sizes and Lead Times
- Petri Dish Sizes for Canadian Labs: Bulk Ordering and Case Counts
- Reagent Water Testing Frequency for Ontario Laboratories: How Often, What to Test, and Who Signs Off
Frequently Asked Questions
How many plates are in a case of petri dishes?
Three hundred and twenty, in the 100 x 15 mm format. The dish arrives empty and ready to pour, so the case count is what one delivery pours, not what it tests.
Does an Ontario lab need a licence to buy consumables?
No. The facility licence under the Laboratory and Specimen Collection Centre Licensing Act applies to the laboratory or collection centre, not to the goods it buys. A consumable line carries no provincial licence, so the checks on it are lot traceability and stated material.
Is ISO 15189 something a supplier can be certified to?
No. ISO 15189:2022 is a requirement on the medical laboratory's own quality and competence system, so the lab holds it, not the company selling it tubes. What a supplier can be asked is what evidence it keeps for lot traceability.
How do you work out cases per month from tests per week?
Multiply tests per week by the consumables per test, multiply by 4.3, and divide by the case count. At 300 plate counts a week and one dish each, that is 1,290 dishes, or four cases of 320.
Last updated: October 2026. CliniEco Medical is a licensed medical device establishment (MDEL #35334).