Trial Lens Sets in Ontario: Diameter, Power Step and What to Order

Rolls of cotton wool used for cleaning trial lens rims and trial frames between patients

A trial lens set is the one refraction instrument a practice can still use when the phoropter is out of service, when a patient cannot sit behind it, and when a child needs a lens held rather than dialled. This guide is about the purchase decision rather than the technique: what the set has to contain, why the aperture of the lens changes what you can do with it, which power steps earn their place in the case, and which frame and accessories have to be ordered at the same time. Ontario practices buy these sets through optical and ophthalmic suppliers rather than through a single catalogue, so the specification has to be written by the buyer. The wipe used on the lens rims and the frame between patients is stocked as disposable washcloths, 10 x 13 inch, 500 per case, and the trial frame that holds the lenses is a separate device with its own device rule.

Quick facts

  • ISO 9801:2009 specifies requirements for mounted ophthalmic full and/or reduced aperture trial case lenses for determining refractive error, and it takes priority over ISO 15004-1 where the two differ.
  • In the United States a trial lens set is 21 CFR 886.1405, Class I, exempt from premarket notification; the clip is 886.1410 and the frame is 886.1415, both Class I.
  • The CFR identification for the set is narrow and worth reading before a specification is written: lenses "of various dioptric powers intended to be handheld or inserted in a trial frame for vision testing to determine refraction".
  • A reduced-aperture lens is not a lower-cost version of a full-aperture lens; it is the format that keeps high-power lenses usable without a rim that will not fit the frame.
  • The accessories that decide whether the set is usable — occluder, pinhole, Maddox rod, cross-cylinder, prism bar — are usually ordered separately and are the first items a practice forgets.
  • Nothing in the device rules sets how often a lens is cleaned; that comes from clinic policy and the manufacturer's instructions, which is why the written routine matters more than the wipe brand.

What does a trial lens set actually contain?

A working set is four things in one case: spheres, cylinders, prisms and accessories. The spheres run from a high minus to a high plus in steps, the cylinders cover the astigmatic range in a smaller number of steps, and the prisms are a short series of small angles. The accessories are the parts that turn a lens set into a refraction: an occluder, a pinhole, a Maddox rod or wing, a cross-cylinder, and often a set of reading add lenses.

The case layout matters more than buyers expect. A set laid out in rows by power with a printed index is faster to use than a set with the same lenses in an unordered tray, and the difference shows up as chair time on every refraction. When a practice specifies a set, the specification should name the layout as well as the lens count.

Rolls of cotton wool used for cleaning trial lens rims and trial frames between patients

The frame is not part of the set in either country's device rules, and that is the first place a purchase order goes wrong. A set of lenses with no frame, or with one frame and four exam rooms, is a set that sits in its case.

What does ISO 9801:2009 require, and why does the aperture matter?

The scope of ISO 9801:2009 is short and precise. It "specifies requirements for mounted ophthalmic full and/or reduced aperture trial case lenses for the determination of the refractive error of the eye", and it states that the standard "takes priority over ISO 15004-1, if differences exist" (ISO 9801:2009). Two consequences follow for a buyer.

The first is that full aperture and reduced aperture are both covered, so a set that mixes them is not a non-conforming set — but the two behave differently. A full-aperture lens presents a large optical area, which is comfortable for the patient and easy for the clinician to hold in front of the eye. A reduced-aperture lens has a smaller clear zone in an opaque mount, which cuts peripheral distortion at high powers and makes high-minus and high-plus lenses tolerable. Practices that refract children, patients with small pupils or patients with high refractive error usually want both formats in the case rather than one.

The second is the priority rule. Where ISO 9801 and ISO 15004-1 differ, the trial lens standard governs. That matters when a supplier's datasheet cites the general ophthalmic standard only: the datasheet is describing a different document from the one that applies to the lenses in the case.

How many lenses, and which power steps, should an Ontario practice order?

There is no regulatory answer to this question, which is why it is the part of the specification that gets copied from whatever the last practice bought. The workable approach is to build the set from the prescriptions the practice actually writes.

Element of the specification What to write in the order Why it matters in the room
Sphere range and step The highest plus and minus the practice refracts, with a 0.25 D step inside the working range and a coarser step at the extremes A set that stops at the edge of the practice's own range forces a referral or a lens stack
Cylinder range and step The axis range the practice manages, with the cross-cylinder accessory named separately Cylinder steps that skip values slow down refinement and invite rounding
Aperture Full aperture, reduced aperture, or a stated mix High-power lenses in full aperture are heavy and distort at the rim; reduced aperture fixes that
Prism A short series of small angles plus a prism bar if the practice measures deviations Prism is the accessory that gets borrowed, lost and reordered
Accessories Occluder, pinhole, Maddox rod or wing, cross-cylinder, reading adds These decide whether the set covers binocular and near work at all
Case and index Printed index by power, and a layout that matches how the practice works A faster layout saves seconds on every lens change, every refraction
Marking Power and axis legible on each lens edge or mount Unmarked lenses get sorted by guesswork, and guesswork ends up in the record

A single-room practice can work from a moderate sphere and cylinder range with a full accessory kit; a practice with two to four lanes needs a set plus a second frame, because one set cannot be in two rooms; a teaching practice needs the full and reduced aperture mix plus spares of the accessories that wear out.

The number of lenses is a poor proxy for capability. A large set with no cross-cylinder and no pinhole is less useful than a smaller set that covers the practice's range. Published work on subjective refraction with trial frames describes routines built on power-vector arithmetic rather than on brute-force lens stacking (Ophthalmic Physiol Opt 2017), and those routines need a predictable step size more than a wide range.

Which frame, clip and accessories belong in the same order?

The frame is where the measurement becomes repeatable. A trial frame carries a pupil distance scale, adjustable temples and a nose rest, and the scale is what lets the clinician set the same interpupillary distance between visits. A frame without a readable scale turns every refraction into a fresh guess.

Device US rule What it is What to specify when ordering
Ophthalmic trial lens set 21 CFR 886.1405, Class I, exempt from premarket notification Lenses of various dioptric powers, handheld or inserted in a frame, for vision testing to determine refraction Sphere and cylinder range, aperture format, accessories, case index
Ophthalmic trial lens clip 21 CFR 886.1410, Class I Holds a single lens in front of the eye or over a frame Spring tension and jaw opening, so it grips the lenses actually bought
Ophthalmic trial lens frame 21 CFR 886.1415, Class I Mechanical device that holds trial lenses for vision testing Pupil distance range and scale legibility, temple adjustment, nose rest fit

The clip is the accessory that gets left out of an order and then improvised. It is a separate device in the CFR, it costs little, and it is what makes a handheld lens usable during a quick comparison. Practices that refract children or bedbound patients use it constantly.

Prisms deserve their own line in the order. A trial set typically includes a short prism series, but a practice that measures deviations needs a prism bar as well, and the bar is a different purchase. The same is true of the cross-cylinder: it is named in the accessory list, and it is the tool that makes cylinder refinement tolerable for the patient.

Is a trial lens set Class I in the United States, and what applies in Ontario?

In the United States the answer is written down and unusual for its clarity. 21 CFR 886.1405 covers the set, 886.1410 the clip and 886.1415 the frame, and all three are Class I; the set and the frame are exempt from premarket notification, subject to the limitations in 886.9 (886.1405, 886.1410, 886.1415). Class I here means general controls, not an absence of rules.

In Ontario, the purchase question is not a device-class question at all. The set arrives through an optical supplier, the applicable product standard is ISO 9801:2009, and the clinic's obligations attach to how the lenses are handled, cleaned and recorded rather than to a provincial licence for the instrument. That is the practical difference: a US buyer can check a classification database and stop; an Ontario buyer has to check the standard on the datasheet and then write the handling routine.

Question Ontario United States
Product standard to cite in the specification ISO 9801:2009, with ISO 15004-1:2020 as the general ophthalmic standard where ISO 9801 is silent ISO 9801:2009 for the products; 21 CFR 886.1405, 886.1410 and 886.1415 for the device route
Device classification Not a classification a buyer has to resolve; the federal device framework applies to the supplier Class I for the set, the clip and the frame
Premarket notification Not a buyer's step Exempt for the set and the frame, subject to 886.9
What the clinic documents Cleaning between patients, frame condition, missing or damaged lenses The same, plus the classification if the practice is part of a US group purchasing decision

What does the order need beyond the lens count?

Three items decide whether the set survives its first year: a spare frame, a documented cleaning routine and a way to notice a missing lens before a patient does.

The spare frame is not optional in a practice with more than one lane. Frames get dropped, temples bend and nose rests disappear, and a set without a frame is unusable at exactly the moment it is needed.

The cleaning routine is the clinic's own, because no device rule sets it. What the routine needs is a named agent, a named step for the lens rim and the frame, and a frequency tied to patient contact rather than to the end of the day. A wipe that is safe for a coated spectacle lens may not be safe for an uncoated trial lens, and the manufacturer's instructions are the tie-breaker.

The lens inventory check belongs in the same monthly routine as the frame inspection. Counting the lenses against the case index takes minutes and catches the missing high-minus lens that would otherwise surface during a refraction for a patient who needs it.

Box of blue nitrile examination gloves for handling trial lenses and frames

Consumables for the lane are bought on the same account as the instruments: gloves for handling lenses and frames come as nitrile examination gloves, 3.5 mil, 1,000 per case, and the wipe supply is the washcloth case of 500. Practice-level purchasing runs through the wholesale programme, and the wider ophthalmic range sits in the sterilization monitoring collection. Reselling? become a distributor.

For practices that also run a sterilizer for contact lenses, probes or instruments, the record that a reviewer will ask for is the same shape as the one described in how often eye charts and occluders should be cleaned and in the device class question for trial lens frames.

Start the record before the set arrives: the printable instrument and surface log gives each lens case, frame and accessory a dated line, so the first week of use is documented rather than remembered.

If the practice wants the schedule built rather than filled in, the log generator on the same page produces a per-room sheet sized for the case it belongs to.

Questions about how a trial lens routine fits the rest of a clinic's infection-control paperwork go to the consultation desk, where the reply is written, specific to the equipment and the province, and cites the standard or regulation it relies on — no account and no sign-up needed.

Sources

All links checked 23 October 2026.

Related reading

Frequently Asked Questions

What is the difference between a full aperture and a reduced aperture trial lens?

A full-aperture lens presents a large clear optical area; a reduced-aperture lens has a smaller clear zone in an opaque mount. Both are covered by ISO 9801:2009. The reduced format keeps high-power lenses usable, because the patient looks through a smaller, better-corrected area instead of the distorted periphery.

Are trial lens sets regulated as devices in the United States?

Yes. 21 CFR 886.1405 covers the ophthalmic trial lens set as a Class I device, exempt from premarket notification subject to the limitations in 886.9. The clip and the frame are separate entries, 886.1410 and 886.1415, and both are Class I as well.

Which standard should appear on the purchase specification?

ISO 9801:2009 for the lenses, because it is the standard written for mounted full and reduced aperture trial case lenses and it takes priority over ISO 15004-1 where the two differ. The general ophthalmic standard still applies where ISO 9801 is silent.

How many lenses does a practice actually need?

Enough to cover the range the practice refracts, with a 0.25 D step inside the working range. A set that stops short of the practice's own high-minus and high-plus work forces referrals, and a set without a cross-cylinder and a pinhole is missing the accessories that do the work.

Should the frame and clip be ordered with the set?

Yes. The frame and the clip are separate devices under both the US rules and any sensible purchase order, and a set without a frame cannot be used at the chair. Practices with more than one lane need a frame per lane or a spare.

How should trial lenses be cleaned between patients?

Follow the lens and frame manufacturer's instructions and the clinic's written routine, naming the agent and the step for the rim, the mount and the frame. No device rule sets an interval, so the audit trail is the written routine plus the dated log.

CliniEco Medical supplies infection-control and sterilization consumables in Canada under MDEL #35334. This article describes published standards and purchase practice and is not clinical advice for a specific patient; confirm lens specifications and handling instructions with the manufacturer of the set in use.

Already working with clinics? Become a regional representative.