A sterile 120 mL specimen container in this catalogue is the lowest-cost item on most specimen order sheets, and the arithmetic behind that sits on the listing rather than in a table here: the case is a 2-pack holding 200 containers, and the case price shown on the product page divided by 200 gives the per-container cost. One 100-pack is exactly half of that case, so both formats come out at the same unit cost. The arithmetic is not the interesting part. The interesting part is that a general dental practice in Ontario sends so few specimens that a 200-container case is a multi-year supply, which means the number that decides the order is the expiry date printed on the pack, not the per-container price.


This is the decision a practice manager actually faces when a dentist starts sending biopsy specimens to an oral pathology laboratory, or when a hygiene department begins collecting for a point-of-care test: buy the 100-pack and treat it as a clinical stock item with a date on it, or buy the case because the per-container figure looks tidy. Both formats sit at the same unit cost, so the choice has to be made on something else.
What does one sterile specimen container cost per use?
The listing carries two purchase formats and they are priced to the same unit cost, which is the first thing to notice before comparing anything else.
| Format in the listing | Containers received | Case arithmetic | How the per-container cost is obtained | What it fits |
|---|---|---|---|---|
| Single 100-pack | 100 | One case of this format is two such packs | Case price on the product page ÷ 200 | A first order, or a practice that sends a specimen every few weeks |
| 2-pack case (2 × 100) | 200 | 2 × 100 | Same figure: case price ÷ 200 | Two or more chairs sending regularly, or a clinic that shares stock with a second site |
| Per-container cost difference between the two formats | — | — | Zero: the two formats are the same unit cost | There is no volume discount to chase |
| 90 mL graduated leak-proof cup, 6-pack case | 600 | 6 × 100 | Case price ÷ 600 | Routine urine collection; the listing makes no sterility claim |
The last row is the other format in the same family: a 90 mL graduated leak-proof sample cup comes 600 to a case, and the case price divided by 600 puts a single cup at roughly a third of the screw-cap container's unit cost. It is the routine urine-collection format, sized for a volume a laboratory reads off the moulded graduations, and its listing describes it as leak-proof and single use rather than sterile. The 120 mL screw-cap container is the sterile one, and the gap between those two per-unit figures is the difference between a cup and a sterile screw-cap jar — not a difference a clinic should try to arbitrage on a specimen that goes to pathology.
Read the third row before planning anything: buying 200 containers instead of 100 does not lower the unit cost by a cent. The 2-pack is exactly two 100-packs, so the only thing the larger format buys is one fewer purchase order. For a practice that sends two or three specimens a month, that is not worth much — and it is worth less than nothing if the second pack sits unopened past its sterilisation date.
How many containers does a dental practice actually use in a month?
Usage here is not like glove or pouch usage, and the difference matters because the usual "procedures per day" model does not apply. A container leaves the practice only when something is collected and sent out: a tissue specimen for oral pathology after a suspicious lesion is excised or biopsied, a specimen for a laboratory test a dentist has ordered, or a sample a public health or specialist referral requires. Restorative work, hygiene appointments and crown seatings generate none of them.
The table below is an arithmetic model, not a measurement drawn from a survey. It is built on the assumption that a practice collects one specimen per chair per month on average, which is a deliberately generous figure for general dentistry — the point of the model is to show how low the count is, and a higher assumption only strengthens the conclusion.
| Chairs in the practice | Assumed specimens per month | Containers used per year | Years covered by one 200-container case | Sensible order |
|---|---|---|---|---|
| 1 chair | 1 | 12 | 16.7 | One 100-pack, replaced on expiry |
| 2 chairs | 2 | 24 | 8.3 | One 100-pack, share with the second chair |
| 4 chairs | 4 | 48 | 4.2 | One 100-pack, two if a specialist suite sends weekly |
| 4 chairs plus an oral surgery room | 12 | 144 | 1.4 | The 2-pack case starts to make sense |
Four chairs at one specimen a month each is 48 containers a year, and a 200-container case would still be half full four years later. A general practice is therefore not really buying a consumable on a usage cycle; it is holding a sterile device on a shelf and hoping the date has not passed when a patient needs it. That is the argument for the smaller format, and it is the argument a practice should make in writing on its own order sheet.
Why does the per-container figure understate the cost per use?
Because the cost that a leaking or mislabelled container creates is not paid at the container. A container that arrives at the laboratory without a legible second identifier, or with a lid that has been loosened in transit, is rejected, and a rejected specimen means the patient is recalled: a second appointment, a second collection, a delay in a diagnosis that someone is already anxious about. Against the cost of a re-collection, the gap between the lowest unit cost in a catalogue and one priced twice as high is noise.
That is why the closure and the label carry more weight than the price. The 120 mL container in this catalogue ships with a threaded screw cap and a tamper-evident label that folds across the lid, so a lid that has been opened is visible before the specimen is sent. The label carries the fields a receiving laboratory reads first — date, room number, patient name, requesting dentist, type of specimen — which is the same set a practice needs when it transfers a specimen between sites.
The other hidden line is the secondary packaging. A specimen container is a primary receptacle, not a shipping system, and a container on its own does not satisfy the transport rules a laboratory applies. The container goes inside a 95 kPa secondary bag with absorbent material, and that bag is what carries the UN3373 marking when the specimen travels as Category B. A practice that buys containers without checking that its 95 kPa specimen transport bags are stocked has bought half the system.
What has to be true of the container before it leaves the chair?
A container sold as sterile and single use carries obligations that run from the manufacturer to the person who labels it. In Canada a specimen container is a Class I medical device; the distributor's establishment licence number is the traceable link back to the importer, and CliniEco Medical distributes under Health Canada MDEL #35334. Practically, four things have to hold at the chair before the container goes into the bag.
The container has to be inside its printed expiry date and still sealed under an intact tamper-evident label. The label has to carry two independent patient identifiers plus the collection date and time — a name alone is not enough, and this is the failure that shows up most often when a laboratory queries a specimen. The specimen has to be the type the container is intended for: a 120 mL screw-cap jar is for the samples a clinic sends in a liquid or semi-solid form, not for a swab or a slide. And the transport chain has to be closed, with the secondary bag, absorbent and marking in place before the specimen leaves the building.
Record keeping follows the same logic as instrument reprocessing. The Royal College of Dental Surgeons of Ontario requires a practice to be able to show what it did and when, and a specimen that cannot be traced to a patient, a date and a requesting clinician is a record gap whether or not the container was sterile. A single log line per specimen, kept with the container stock rather than in a separate binder, is the version that survives an inspection.
Where does a clinic take this next?
Three things a practice can act on rather than read: the printable compliance log sheet, which records receiving dates, lot numbers and open-on dates for sterile stock and exports from the browser; the clinic supply planner, which turns a specimen count per chair into a yearly quantity and a reorder date; and Ask your compliance question when a transport or labelling question has to be answered in writing for a laboratory or an inspector.
Multi-site groups that send specimens from several locations can Wholesale and multi-site ordering to hold one stock position instead of one per office. Reselling? become a distributor.
Related reading
- How much specimen container 120 mL does a Canadian clinic use per month?
- Sterile specimen containers in bulk: which size fits which test
- Which specimen container closure prevents leaks in transport?
- Ordering specimen transport bags and containers in Ontario: sizes and cases
Frequently Asked Questions
Is a 200-container case a lower unit cost than a 100-pack?
No. The case is two 100-packs and both formats work out to the same per-container figure — the case price divided by the number of containers — so the larger format only saves a purchase order. For a practice sending a few specimens a month the 100-pack is the lower-risk buy, because the second pack ages on the shelf.
How long can sterile specimen containers sit in stock?
The date printed on the pack governs. Sterile barrier shelf life is set by the manufacturer and stated on the labelling, so the practice should record the expiry when the stock arrives and rotate it, rather than assuming a sterile jar keeps indefinitely because it is sealed.
Does a general dental practice need specimen containers at all?
Only when a specimen leaves the office — a tissue sample for oral pathology, a laboratory test ordered by the dentist, or a sample a referral requires. That is why the monthly count is measured in single figures per chair and why containers are a dated stock item rather than a routine consumable.
Can a specimen container be washed and reused?
No. It is supplied sterile and single use, and opening the tamper-evident label destroys the seal that tells the laboratory the container was intact. A reused container also breaks the traceability a receiving laboratory relies on.
What packaging does a specimen need for transport?
A primary receptacle, absorbent material, and a secondary bag rated to 95 kPa with a document pouch, marked for Category B when the specimen travels as UN3373. The container alone is only the inner layer of that system.
Sources
- CSA Group — CSA Z314:2023, reprocessing of medical devices in health care settings - ISO — ISO 11140-1:2014, chemical indicators for sterilization processes - Transport Canada — Transportation of Dangerous Goods, Category B biological substances - Royal College of Dental Surgeons of Ontario — infection prevention and control requirements for dental practices - Health Canada — medical device licensing and establishment licensingCliniEco Medical distributes clinic consumables in Canada under Health Canada MDEL #35334. Requirements that bind a particular practice remain the ones in its own written procedures and in the rules of the province where it operates.
Last updated: 19 November 2026.