Specimen Bag Labeling Requirements for Canadian Laboratories: PHAC and Transport Canada Standards

Specimen Bag Labeling Requirements for Canadian Laboratories

Buying specimen bags? Distributed in Canada by CliniEco Medical, Toronto.

CliniEco Leak-Proof Sample Cups  ·  CliniEco Medical Specimen Transport Bags  ·  CliniEco Medical UN3373 Specimen Transport Bags  ·  Wholesale & clinic accounts

Introduction

In Canadian clinical laboratories, proper specimen bag labeling is governed by two federal authorities: the Public Health Agency of Canada (PHAC) and Transport Canada under the Transportation of Dangerous Goods (TDG) Regulations. Laboratories that handle, store, or ship diagnostic specimens must comply with both biosafety and dangerous goods frameworks to ensure worker safety and regulatory conformity. Failure to meet these standards can result in penalties, shipment rejection, and compromised laboratory accreditation.

PHAC Biosafety Guidelines for Specimen Labeling

PHAC's Canadian Biosafety Standard (CBS), second edition, sets mandatory requirements for handling and storage of biological materials. Under CBS Section 4.4 — Identification and Labelling, all biological materials must be clearly labelled with the biohazard symbol, the name of the infectious substance, and relevant risk group information. PHAC directs that containers and specimen bags display the universal biohazard symbol in a contrasting colour, along with a notation of the substance or a reference to a detailed manifest.

PHAC also requires specimen bags used for transport or storage be leak-proof, tear-resistant, and sealable. Laboratories must label each bag with the collection date and the name or identification number of the submitter, consistent with the Canadian Biosafety Handbook (CBH).

Transport Canada TDG Regulations for Diagnostic Specimens

Transport Canada's TDG Regulations adopt the United Nations Model Regulations and ICAO Technical Instructions. Under Part 2 — Classification, diagnostic specimens fall under UN 3373 — Biological Substance, Category B, provided they are not known to contain a Category A pathogen. This classification dictates specific labelling and packaging requirements for all modes of transport.

TDG Regulation Section 4.15 requires that each means of containment bear the UN 3373 mark in a diamond-shaped format with the text "UN 3373" and "Biological Substance, Category B." This mark must be visible and legible, measuring at least 15 mm by 15 mm. The outer packaging must also display the proper shipping name and a 24-hour emergency contact number when required.

Specimen Bag Labeling Requirements for Canadian Laboratories

UN 3373 Classification and Its Impact on Labeling

The UN 3373 designation applies to clinical samples — blood, urine, tissue, swabs, and other biological materials — that have a low probability of containing infectious substances. This classification reduces administrative burdens while maintaining rigorous safety standards. The label must be a diamond shape with a black border on a contrasting background, enclosing the UN number and "Biological Substance, Category B."

Every specimen bag prepared for off-site transport must carry the UN 3373 mark on the outer packaging or on the bag itself if it serves as the outermost layer. Intra-facility transports may be exempt from TDG marking, but PHAC biosafety labelling still applies.

Triple Packaging System and Corresponding Labels

Both PHAC and Transport Canada mandate the triple packaging system for diagnostic specimen transport:

  • Primary container — a leak-proof tube or vial labelled with the patient identifier and specimen type.
  • Secondary container — a leak-proof, sealable specimen bag (such as CliniEco's Self-Sealing Specimen Bags) containing the primary container with sufficient absorbent material. This bag must bear the biohazard symbol and UN 3373 marking if it is the outermost layer.
  • Tertiary (outer) packaging — a rigid outer box with the UN 3373 diamond label, proper shipping name, and shipper/consignee information.

The secondary container is where specimen bag labelling is most critical. PHAC requires the biohazard symbol; Transport Canada requires the UN 3373 mark. Many laboratories use a CliniEco Self-Sealing Specimen Bag as the secondary container.

Biohazard Symbols and Patient Information Requirements

The biohazard symbol is the most universally recognized marking on specimen bags. Under PHAC's CBS, the symbol must be red, orange, or black on a contrasting background. The symbol should be a minimum of 15 mm in height for laboratory storage and larger (typically 30 mm) for transport packaging. Patient information is governed by provincial privacy legislation (PIPEDA federally, PHIPA in Ontario). Specimen bags must include sufficient patient identifiers — typically full name, date of birth, and health card number — while ensuring confidentiality.

Conclusion

Canadian laboratories face a dual regulatory environment: PHAC governs biosafety labelling for in-house handling, while Transport Canada TDG Regulations govern labelling for transport. Compliance requires specimen bags clearly marked with the biohazard symbol, UN 3373 classification (when applicable), patient identifiers, and traceability information. By integrating these requirements into standard operating procedures — and choosing high-quality specimen bags — laboratories can ensure safety, regulatory conformity, and uninterrupted operations.

Stocking UN 3373 specimen bags for your lab? Send us your monthly volume and we will price a standing order for your site. Request a quote on specimen bags for your facility.

Related Reading

Explore more guides in this category:

Related supplies: specimen bags with numbered tracking labels.

Frequently Asked Questions

What must appear on the outside of a specimen transport bag?

The UN 3373 diamond, the words Biological Substance, Category B, the shipper and consignee with a 24-hour phone number, and the package orientation arrows when liquid is present. The requisition should travel in the outer pocket, not inside with the specimen, so it stays readable without opening the bag. Labs that skip the phone number are the ones whose shipments get held at the courier hub.

Why does a 95 kPa bag matter for Canadian shipments?

Transport Canada's TDG rules and the UN packaging tests require a primary receptacle that withstands a 95 kPa pressure differential across the range of temperatures the shipment will see, so a leaking tube does not escape the secondary packaging. A bag rated at 95 kPa with an absorbent pad is the ordinary way to meet that. CliniEco Medical stocks 95 kPa certified specimen bags with the document pocket built in.

What is the triple packaging system in practice?

Primary receptacle holds the specimen, secondary packaging is leak-proof and contains absorbent material, and the outer packaging carries the markings and protects the whole assembly. For Category B specimens, a specimen bag often serves as secondary packaging when the outer box is rigid enough. Each layer has to be independently closed, and the absorbent must be able to take the full volume of the primary containers.

How must labels be attached so they survive transport?

Label the primary container before it goes into the bag, never after, and use a label that sticks at refrigerator temperature and through condensation. Write the patient identifiers exactly as they appear on the requisition, add the collection date and time, and initial the container. Direct marking on the tube is more reliable than a label wrapped over a curved surface, which lifts in a centrifuge.

Who is accountable when a specimen is rejected for labelling?

The collecting site, not the courier. Laboratories reject unlabelled or mismatched specimens because the alternative is reporting a result against the wrong patient, and the recollection cost lands on the clinic. Standard work is a two-identifier check at the chair and a second check at the bagging station. CliniEco Medical supplies 3-wall specimen transport bags and 120 mL sterile screw-cap containers for that workflow.

Already working with clinics? Become a regional representative.