How Much Specimen Container 120 mL Does a Canadian Clinic Use Per Month in Canada?

How Much Specimen Container 120 mL Does a Canadian Clinic Use Per Month in Canada?

How Much Specimen Container 120 mL Does a Canadian Clinic Use Per Month in Canada?

A collection site running 60 collections on each of 21 clinical days uses about 1,260 containers a month, and around 1,300 once a three per cent repeat-and-reject allowance is added. A case holds 200 containers, in two packs of 100, so that is 6.5 cases — order seven and keep the half case as the buffer. The arithmetic is collections multiplied by containers per collection, plus an allowance; the only input that genuinely moves the answer is the collection count, which the requisition log already holds.

For sizing against a case, the item in this example is the 120 mL sterile screw-cap specimen container, supplied 200 to a case as two 100-packs.

One sterile 120 mL specimen container with a blue screw cap and a printed patient label panel
One container is one collection. The count is a collection count before it is a purchasing decision.

How do you convert daily collections into cases per month?

Four steps, each of which a clinic can fill in from a record it already keeps. Count the collections on a normal day from the requisition log rather than from memory. Multiply by the clinical days in the month. Add the repeat-and-reject allowance as a percentage of that figure. Divide by 200, the containers in a case, and round up to the whole case.

Sixty collections on twenty-one days is 1,260; a three per cent allowance adds about 38, giving 1,298; divided by 200 that is 6.49, so seven cases. The rounding is not waste — it is the buffer that stops the last week of the month being covered by a borrowed box.

Containers per month at 21 clinical days and a 3% repeat allowance
20 collections a day 433 ≈ 2.2 cases
40 collections a day 866 ≈ 4.3 cases
60 collections a day 1298 ≈ 6.5 cases
80 collections a day 1730 ≈ 8.7 cases
100 collections a day 2163 ≈ 10.8 cases

Bar length is relative; the number in bold is the monthly figure (units per month).

Why does the 120 mL size change the count?

It changes the count through what the site can put in one container. A 120 mL container takes a 24-hour urine collection or a larger volume sample, so one container covers one collection that would otherwise need two smaller ones. Where a site stocks both sizes, the useful record is collections by test type rather than a single total, because a test mix that shifts toward large-volume work raises the 120 mL share without changing the collection count at all.

The second effect is physical: 200 containers to a case is a bulky box, and sites that store cases in a treatment room rather than a stockroom tend to order in smaller multiples and reorder more often. That is a storage decision, not a consumption one, and it belongs on the order sheet as a note rather than being folded into the monthly figure.

Product diagram of a 120 mL specimen container case, listing the pack contents and the two 100-packs that make up the 200-container case
Case configuration as printed on the product diagram: 200 containers, supplied as two 100-packs.

Should the repeat rate be a separate line?

Yes, and for a bookkeeping reason rather than a clinical one. A rejected specimen is not consumed by the patient — it is consumed by the process — so a site that buries it inside the collection count ends up arguing about why the order does not match the requisition total. Three per cent is a working allowance, not a benchmark: the number to use is the site’s own, taken from the reject log over a month.

Where does the count go wrong?

Four places. Counting patients instead of collections, which understates any site where a patient gives more than one specimen. Forgetting that some tests take two containers, which shows up as a shortage that nobody attributes to the order. Leaving the repeat allowance out, then covering it from the next month’s box. And ordering in single packs because a case will not fit in the cupboard, which raises the ordering effort without changing consumption.

Input Where the number comes from Effect if it is wrong
Collections per clinical day Requisition log for a normal day, not the busiest day The largest single error: a 20% miss moves every other line by 20%
Clinical days in the month Opening calendar, minus holidays Small, unless the site runs Saturdays — then it is a fifth of the total
Containers per collection Test list: which tests take two A 5% share of two-container tests is a 5% order error
Repeat and reject allowance Reject log over one month, as a percentage Understates the order, then hides the cause of the shortage
Containers per case The pack as supplied — 200, in two 100-packs Rounding to the pack is the difference between an order and a shortage

How much stock should a clinic hold?

One month in use plus one case on the shelf, which for the example site is seven cases in rotation and one spare. Containers are light, stack well and do not spoil, so the shelf stock costs space rather than money; but they are also easy to raid for another room without a record, so the spare case should sit in the stockroom with the receiving note rather than in a treatment-room cupboard.

What has to be checked when the cases arrive?

Three things, at the receiving step rather than at the point of use: that the outer carton is intact and dry, that the packs inside are sealed with the sterile claim and the lot legible, and that the quantity matches the receiving note. A case that arrived with a split carton is a case to hold aside and check pack by pack, because a container whose seal is compromised is not a container the site can put a specimen in.

Where does a clinic take this next?

Three things a clinic can act on rather than read: a printable compliance log sheet that records issue dates, stock checks and cleaning entries and exports from the browser; the clinic supply planner that turns patient or visit volume into monthly quantities; and, if the question is how a specific step should be documented, ask a sterilization compliance specialist with the clinic size and province named. Facility and multi-site buyers can open a wholesale account for institutional pricing. Reselling? become a distributor.

Related Reading

Frequently Asked Questions

How many 120 mL specimen containers does a clinic use a month?

Collections per clinical day, times clinical days, plus a repeat-and-reject allowance. Sixty collections on twenty-one days is 1,260 containers, and about 1,300 with a three per cent allowance — 6.5 cases of 200, so seven cases.

How many containers are in a case?

Two hundred, supplied as two packs of 100. That case size is what drives the rounding step: 1,298 containers is 6.49 cases, and the order is seven.

Should a site order in single packs or by the case?

By the case, unless storage space genuinely will not take it. Ordering in single packs costs more ordering effort for the same consumption, and it hides the monthly rate from whoever is doing the ordering next.

Do specimen containers expire?

The sterile claim on the pack is date-governed where a date is printed, and the seal is what carries it. Stock rotated so the oldest case is used first stays inside its printed date without anyone having to count.

CliniEco Medical holds Health Canada MDEL #35334. Container volume, sterility claim and case configuration are set by the product label and the packaging as supplied. This page is general information about supply quantities and record-keeping, not clinical advice. Confirm current specifications and order status on the product page. Health Canada MDEL #35334 covers our establishment licence; it is not a statement about any individual device.

Already working with clinics? Become a regional representative.