Case Review: A Winnipeg Lab Cut Specimen Bag Leaks by Standardising One Size

A diagnostic lab in Winnipeg was losing two or three samples a week to leaks in transit, and the intake team had started double-bagging everything as a workaround. The lab manager suspected the bags. What the team actually found was that three bag sizes were in use across four collection sites, and none of the sites had agreed on which size belonged with which container. This case review sets out the audit, the change, and the quarter that followed.

The lab moved to a 6 by 9 inch three-wall specimen transport bag as the standard for single-container send-outs, with one larger size retained for rack transfers.

How did the lab trace the leaks?

Every rejected sample already carried a reason code, but nobody had sorted the codes by collection site and bag size. The intake supervisor spent two weeks adding bag size to the code entry, and the pattern appeared quickly: most leaks came from sites using a 6 by 9 inch bag for a 120 mL container, where the container had to sit at an angle and the closure took the strain of the courier bag.

The second finding was about paperwork. Two sites kept the requisition inside the specimen compartment, which meant a small leak turned the requisition into pulp and the sample was rejected even when the container itself had held.

What did the lab change?

Three changes, all in ordering and packing rather than in collection technique. First, the 7 by 11 inch size became the standard for anything containing a 120 mL container, and the 6 by 9 inch size was restricted to single swab tubes and small-volume work. Second, every site received a laminated card showing which container goes in which bag, with a photograph of a correctly packed bag. Third, the requisition was moved to the outside pouch at every site, and the intake team was authorised to reject packs with internal paperwork without further discussion.

95 kPa specimen transport bag with absorbent layer and documentation pocket for diagnostic specimens

The lab also stopped buying bags from whichever catalogue was open. One supplier, two sizes, one lot number pattern, so that a failure could be traced to a batch rather than argued about.

What were the results after one quarter?

Measure Before After one quarter
Leak-related rejections per week 2.6 0.4
Packs double-bagged as a workaround 18% of send-outs 0%
Requisitions spoiled by leakage 5 per month 0
Bag sizes in use across sites 3 2

The double-bagging figure was the one the manager used in the report to the sites, because it converted the change into staff time: every pack that no longer needed a second bag was time returned to the collection bench. The rejection figure moved more slowly than expected in the first month and then dropped sharply, which the intake team attributed to the laminated cards being posted late at two of the four sites.

What would the lab do differently?

Two things. The manager would have included the courier in the first meeting, because the courier's own bag handling turned out to explain part of the corner damage. And the lab would have posted the size cards before changing the order rather than after, since the first two weeks mixed old and new stock and produced confusing counts.

How could another lab copy the audit?

Add bag size to the rejection code, sort by site for two weeks, and look for the sites where the container and the bag do not match. Then standardise on two sizes, post a card with a photograph at every collection point, and put the requisition outside the specimen compartment as a rule rather than a preference. None of these steps requires new equipment.

CliniEco Medical Class 4 dual-indicator sterilization pouches, 200-pack, used for packaging and integrity control in a sterile processing suite

Print the sample rejection log to run the same two-week sort, and use the log generator to build the size card for each site.

Ordering for a clinic, lab or care home? Wholesale and multi-site ordering covers case pricing and account setup, and the B2B wholesale collection lists the lines stocked for institutional buyers. Reselling? become a distributor.

Related reading

Frequently Asked Questions

Why do specimen bags leak at the closure rather than the seam?

Because the closure is where the pack is under load when a container does not fit flat. A bag that is too small for its container forces the zip or adhesive strip to take the strain.

Should a requisition go inside or outside a specimen bag?

Outside, in the document pouch. Internal paperwork is spoiled by even a small leak, and the sample is rejected even when the container held.

How many bag sizes should a lab stock?

Two is usually enough: one for single containers and one for rack transfers. Three or more sizes across multiple sites is the pattern that produces mismatches.

How long does it take to see a change in rejection rates?

One month to see direction and one quarter to see a stable rate. Expect a mixed period while old and new stock are both in use.

CliniEco Medical is a licensed medical device establishment (MDEL #35334).

Already working with clinics? Become a regional representative.