Isolation Gowns
Disposable isolation gowns for Canadian clinics, dental practices, long-term care homes and laboratories, in three barrier tiers: two AAMI PB70 Level 1 gowns, one of them plant-based, and a Level 2 gown in 40 gsm SMMS fabric. All three are single use, one size, tie-back and ordered by the case or pack, with knit cuffs on every option.
-
Protection & Single-Use > Body Protection$49.99CAD
More about Isolation Gowns
Which gown level does each task need?
Level 1 is the minimal fluid-barrier tier: it covers brief contact and light splash in low-risk care such as routine rounds, vitals, feeding assistance and transport. Level 2 is the moderate-exposure tier, and it is the gown for blood draws, wound care and dressing changes, suture removal and specimen handling, plus contact precautions in an isolation room where the risk is a splash rather than a spray. Levels 3 and 4 exist for heavy fluid and surgical exposure and are different garments; a clinic doing minor procedures rarely needs them. The practical test that settles most arguments: if there is a container of fluid at forearm height that could be knocked over during the task, order Level 2. For a patient transfer and little else, Level 1 is the honest purchase.
What are the three gowns in this collection?
| Gown | Level as listed | Fabric and build | Ordering unit |
|---|---|---|---|
| Non-woven fluid-resistant gown | AAMI PB70 Level 1 | Three-layer spunbond-meltblown-spunbond polypropylene, knit cuffs, tie-back at neck and waist | 9-pack |
| PLA protective gown | AAMI PB70 Level 1 | PLA non-woven from corn starch, knit cuffs, open-back tie | 13 gowns per pack, one size L to 2XL |
| SMMS 40 gsm isolation gown | AAMI PB70 Level 2 | Four-layer SMMS at 40 gsm, elastic knit cuffs, two back ties | 50 gowns per case |
A dental practice that gowns for twelve aerosol-generating hygiene appointments a day across five days uses 60 gowns a week, so a single 50-gown case of the Level 2 gown falls ten gowns short of that week and the monthly order is five cases; a home care team doing eight visits a day on Level 1 uses 40 gowns a week and clears a 13-gown pack in under three days.
How many gowns should a facility hold at one time?
Count the gown events, not the staff. A gown event is one entry into a room that requires a gown, and most facilities underestimate it by counting staff instead of visits. Take a week's appointment or visit book, count the events that need a gown at each tier, and multiply by the number of gowns a single event consumes — usually one, occasionally two when a task runs long or a gown is contaminated before it is tied. Then hold two weeks of that figure in the cupboard: one week in use, one week as the reorder point, so a late delivery does not send a hygienist looking for a substitute gown that does not meet the level the task needs. Facilities that stock to this figure stop buying emergency packs at a premium and stop splitting a case across two tiers that are not interchangeable.
What is the difference between the two Level 1 gowns?
Barrier tier is the same, fabric is not. The non-woven gown is a three-layer spunbond-meltblown-spunbond polypropylene sheet: the meltblown core holds the barrier, the spunbond layers protect it, and the structure breathes better than a film-coated gown, which is why it can be worn through a long shift in a care home without the wearer overheating. The PLA gown is the same barrier tier built on a plant-based non-woven, and it is the option for a facility whose procurement policy asks for a renewable feedstock. Neither is a substitute for Level 2, and neither should be used for a task that generates spray. Where a home runs both, the split is usually by task list rather than by ward: the PLA gown at the door of the cohort room and the standard Level 1 for transport and rounds.
What should be checked when a case arrives?
Open one gown and check four things: the level stated on the pack matches the purchase order, the cuffs are knit and elastic rather than open hem, both ties are attached at neck and waist, and the seams at the sleeve and shoulder are intact when the gown is pulled on and the arms are raised. Then check the storage: gowns stay dry and off the floor, in the closed cart or cupboard, not on an open shelf under a window. A gown that has absorbed moisture from a damp storeroom is not the barrier the pack states, even when the pack is unopened. Date the case when it arrives and use the older stock first.
How should gowns be sized and stored between shifts?
All three gowns on this page are a universal size stated to fit up to 2XL comfortably, which is the format a care home or a clinic wants at the door of a room: one size on the hook, no sorting under time pressure, no stack of three sizes that someone has to read at speed. That trade-off is worth naming — a universal gown fits most staff and none of them perfectly, and a facility with a wide size spread should test a pack before committing the whole cabinet. Store the stock in the closed cart, keep a week's supply at the point of use and the balance in the main store, and restock the cart at the end of the shift rather than during it. The Level 2 gown for the fluid-exposure tasks is here: CliniEco Medical Isolation Gown — SMMS 40gsm Level 2 Protection, 50-Pack.


