Which Records Does an Ontario Dental Inspector Ask to See in 2026?

An Ontario dental practice does not get a warning before a records request. The RCDSO infection prevention and control standard expects the practice to be able to produce its sterilization and monitoring records on request, and the request is usually answered from a single binder or a single shared folder. What follows is the short list of records that matter and the format that makes them easy to produce.

The list is not long. The reason practices fail records requests is rarely that a record is missing; it is that the record cannot be produced quickly, or that it does not show the sequence of monitoring, failure and corrective action on one page. An inspector reading a scattered pile learns less than an inspector reading three organised weeks.

What records should an Ontario practice be able to produce?

At minimum: the daily sterilization log for each sterilizer, showing the monitoring performed for each day of use; the biological indicator results with their read times; the air removal test results for vacuum sterilizers; instrument reprocessing records including the ultrasonic or washer cycle; the maintenance and service history of each sterilizer; and the practice's written infection prevention and control policy covering hand hygiene, personal protective equipment and environmental cleaning.

Alongside those, keep the consumable traceability that answers "which product was used" — the indicator or pouch reference, and the batch or lot where the manufacturer provides it. That last item is the one most often missing, because it sits with the supply order rather than with the clinical record.

How should the records be organised?

One folder per sterilizer per calendar month, with the daily log and the biological indicator records filed together, works better than a single practice-wide folder because it answers a machine-specific question in one step. Keep the written policy and the service history at the front, where a request for the current policy does not require opening twelve months of logs.

CliniEco Medical Class 4 dual-indicator sterilization pouches, 200-pack, used for packaging and integrity control in a sterile processing suite

Whatever the format, the test is retrieval. If a request arrives on a Tuesday morning, the records for the previous month should be producible within a few minutes, in a form that shows the monitoring, the results and any corrective action together.

Record What it should show Retention
Daily sterilization log Cycle type, parameters, operator initials Current plus previous cycles
Biological indicator record Cycle, incubation start, read time, result Same period as the log
Air removal test record Date, sterilizer, result, reader Same period as the log
Reprocessing record Cleaning step, cycle, operator Same period as the log
Service and maintenance history Date, fault, action, next due Life of the sterilizer
Written IPAC policy Current version, date reviewed Current version only
Consumable traceability Product reference, lot where provided As per the product record

What makes a record weak even when it exists?

A failed result with no corrective action on the same page is weak. So is a biological indicator row with a pass and no read time, a log where two sterilizers share one page without an identifier, and a maintenance file that lists a service visit but not the fault it addressed. Each of these is a record that exists but cannot answer the follow-up question.

The other weak point is the gap. A log with a missing Tuesday and no explanation reads as evidence that the routine was not run, whether or not it was. A written note explaining a closure day, or a single line stating that the sterilizer was not used, closes the gap and costs nothing.

How often should the record set be reviewed?

Review the set monthly, at the same time as the daily log is filed, and confirm three things: every day of use has a monitoring row, every result has a read time, and any failure has a corrective action on the same page. A short review is enough; the point is to catch drift while it is still one week old rather than twelve months.

Once a quarter, walk the records as if answering a request, and time the retrieval. Then update the written policy date if anything in the routine has changed. Practices that keep a single monthly review habit generally find the annual records request unremarkable.

Pair of blue nitrile examination gloves laid out flat for a care or housekeeping task

What should a practice do next?

Print the daily sterilization log sheet and file one folder per sterilizer per month, then walk the sterilization self-check to see which of the records above are currently retrievable. The sterilization compliance hub links the provincial guides that underpin the list.

The sterilization monitoring collection carries the indicator, tape and pouch lines that generate most of these records, including class 5 chemical integrators used in the pouch records. For a group of practices or a multi-site order, wholesale and multi-site ordering covers case pricing and account setup, and the B2B wholesale collection lists the institutional lines. Starting a new record routine? Begin with the 24-hour biological indicator 25-pack. If you want a second read on what your own record set would show an inspector, Ask a compliance specialist. Reselling? become a distributor.

Related reading

Frequently Asked Questions

How long should sterilization records be kept in Ontario?

Keep the monitoring and reprocessing records for at least the current period plus the previous cycle of review, and the sterilizer service history for the life of the machine. In practice most practices retain twelve months of daily logs so an annual records request can be answered from the file rather than reconstructed.

What is the most common gap in Ontario sterilization records?

A failed monitoring result without the corrective action recorded on the same page. The failure itself is not a compliance problem; an unexplained failure with no trace of what was done about it is the record an inspector will ask about.

Should each sterilizer have its own log?

Each row should carry the sterilizer identifier, and separate log blocks or pages for each machine make a machine-specific failure investigable in one step. A shared page without an identifier is a record that cannot answer the follow-up question.

What should be done if the practice was closed on a day with no log entry?

Add a single line to the log noting that the sterilizer was not used, so the gap is explained on the page rather than left to interpretation. A one-line note costs nothing and removes the appearance of a missed routine.

CliniEco Medical is a licensed medical device establishment (MDEL #35334).

Vous travaillez déjà avec des cliniques ? Devenez représentant régional.