Isolation Gown Selection: Level 1 vs Level 2 Protection for Canadian Healthcare

Canadian healthcare facilities must select isolation gowns that meet specific protection levels while balancing cost, comfort, and compliance. Understanding the differences between Level 1 and Level 2 gowns helps procurement teams make informed decisions for their clinical environments.

Isolation gowns Level 1 and Level 2 comparison

ANSI/AAMI PB70 Classification

Where to Buy Isolation Gowns in Canada

CliniEco Medical supplies AAMI-level isolation gowns to clinics, long-term care homes and laboratories across Canada, shipped from Ontario.

Option Recommended for Order
Level 1, non-woven Minimal fluid exposure — standard care Level 1, Non-Woven
Level 2, SMS 40gsm (50-pack) Higher fluid resistance for clinical care Level 2 SMS, 50-Pack
PLA biodegradable Facilities with sustainability targets PLA Level 1, Biodegradable
Gowns, gloves and spore testing together New or restocking clinics Clinic Starter Bundle

Ontario and GTA orders ship free over $99; elsewhere in Canada over $199 ($15 flat below). Bulk and standing orders go through a wholesale account. Print a blank sterilization log sheet from our free generator, or book a sterilization compliance review.

Canadian healthcare facilities must select isolation gowns that meet specific protection levels while balancing cost, comfort, and compliance. Understanding the differences between Level 1 and Level 2 gowns helps procurement teams make informed decisions for their clinical environments.

Isolation gowns in Canada are classified under the ANSI/AAMI PB70 standard, which defines liquid barrier performance levels. Level 1 gowns provide minimal barrier protection against light fluid contact and are suitable for standard patient care, basic examinations, and general administrative tasks where low splash risk exists. Level 2 gowns offer greater barrier protection against fluid strike-through under moderate pressure, making them appropriate for suturing, blood draws, and emergency department procedures. The CliniEco Disposable Isolation Gown meets Level 1 specifications with SMMS non-woven fabric construction, providing reliable protection for routine clinical activities. Facilities handling higher fluid exposure should consider upgrading to Level 2-rated options from suppliers like 3M or Medline that offer comparable products in the Canadian market.

Material and Construction

Level 1 isolation gowns typically use spunbond-meltblown-spunbond (SMMS) polypropylene fabric with a weight of 30-40 gsm. The material offers breathability while maintaining fluid resistance for low-risk scenarios. Level 2 gowns incorporate additional reinforcement layers or film lamination, increasing the fabric weight to 40-60 gsm. Both levels must meet ASTM F1670 and F1671 standards for viral penetration resistance when tested. Key construction features include elastic cuffs, tear-away neck fasteners, and generous sizing to accommodate various body types. Facilities should verify that gowns meet Health Canada's Medical Devices Regulations (SOR/98-282) and carry a valid Medical Device Establishment License (MDEL) number. The CliniEco Medical Isolation Gown Level 2 provides enhanced protection for higher-risk procedures.

Application-Specific Recommendations

Canadian healthcare environments present distinct requirements for isolation gown selection. Long-term care facilities may find Level 1 gowns sufficient for daily care routines, while hospitals and surgical centres require Level 2 or higher for invasive procedures. The PHAC Infection Prevention and Control guidelines recommend risk-based gown selection aligned with the anticipated fluid exposure during each task. Many facilities maintain inventories of both levels to match gown protection with procedure risk. This approach optimizes procurement budgets while maintaining worker safety across all clinical scenarios. 3M and Medline offer comparable products, but CliniEco's gowns provide cost-effective compliance for Canadian healthcare procurement teams.

Healthcare worker wearing isolation gown

Storage and Inventory Management

Isolation gowns should be stored in a clean, dry environment at 15-30 C, away from direct sunlight and moisture. Proper rotation of stock ensures that older inventory is used first, preventing material degradation over time. Canadian healthcare facilities should maintain a minimum 8-week supply of isolation gowns as part of their emergency preparedness plan, aligning with provincial pandemic response guidelines. Many facilities pair isolation gowns with other PPE items such as face masks and gloves to ensure comprehensive protection during patient care activities. For procurement inquiries and bulk pricing on isolation gowns suitable for your facility's specific requirements, contact the CliniEco Medical Team for a personalized assessment. Our team works with healthcare organizations across Canada to supply compliant, cost-effective PPE solutions.

Cost Analysis for Canadian Facilities

Canadian healthcare procurement teams must evaluate both unit cost and total cost of ownership when selecting isolation gowns. Level 1 gowns typically cost 30-40% less per unit than Level 2 alternatives, making them cost-effective for facilities where low-risk activities predominate. However, facilities with high volumes of moderate-risk procedures may find that stocking only Level 2 gowns simplifies inventory management and reduces the risk of using insufficient protection during urgent situations. Bulk purchasing agreements with suppliers like CliniEco can reduce per-unit costs by 15-25% for facilities committing to annual volume contracts. Facilities should also factor in storage costs, as gowns require climate-controlled environments to maintain material integrity over their shelf life. Regular inventory audits help facilities identify usage patterns and optimize reorder quantities to minimize both stockouts and expired stock write-offs.

Related Reading

Explore more guides in this category:

Related reading: explore our infection control resources for clinics.

decode HAI, SSI, CJD and MDRO acronyms in our infection control pillar article.

Ask a compliance specialist — written answers on your equipment and province, with the regulation cited.

Frequently Asked Questions

What actually separates Level 1 from Level 2 gowns?

Both sit under the ANSI/AAMI PB70 classification, which ranks barrier performance by test: Level 1 is the minimal-risk tier for small splashes and is tested against water impact, while Level 2 adds a hydrostatic pressure requirement for low-risk, longer fluid exposure. In practice Level 2 resists soaking through during a procedure that keeps fluid in contact with the fabric, which is where Level 1 fails first.

Which level does a dental or clinic setting need?

Most routine clinic and dental care sits at Level 1 when the task is short and splash volume is small, moving to Level 2 for procedures with visible blood or a stream of irrigation. Decide by task, not by job title, and post the decision at the operatory so the correct gown is picked without asking. CliniEco Medical stocks both tiers, including Level 1 non-woven gowns.

Is a Level 2 gown always made of SMS fabric?

Not always, but SMS is the common construction because the spunbond-meltblown-spunbond layering gives both strength and a fluid barrier without the weight of a coated fabric. The SMS 40 gsm Level 2 gowns uses a 40 gsm SMS build, which is thick enough for a full shift of clinical care while staying breathable enough that staff keep it on for the whole task.

Where does a biodegradable gown fit?

In low-fluid settings where the facility has a sustainability target. A PLA gown such as PLA biodegradable Level 1 gowns covers minimal-exposure tasks and is certified compostable to ASTM D6400, but it is not a substitute for Level 2 at a wet procedure; keep it for reception screening, visitor use and low-risk personal care.

How should gowns be stored before use?

Keep them in the original poly bag off the floor, away from sunlight and not compressed under other cartons, because creasing a barrier fabric weakens it at the fold. Rotate stock first in, first out, and check that the cuff and tie points are intact before the gown goes on the hook. CliniEco Medical, which supplies these gowns in Canada, is a licensed medical device establishment (MDEL #35334).

Vous travaillez déjà avec des cliniques ? Devenez représentant régional.