First Aid and Emergency Response Kits for Canadian Workplaces: Meeting CSA Z1220-17 and Provincial OHS Standards

23 juillet 2026

Kit Type	Workers per Shift	Risk Level
Type 1 — Personal	1 worker	Low to moderate
Type 2 — Basic	2–25 workers	Low to moderate
Type 3 — Intermediate	26–50 workers	Low to moderate
Type 3 — Advanced	51–100 workers	Moderate to high

Each type specifies minimum quantities and types of first aid supplies, including adhesive bandages, sterile gauze, antiseptics, examination gloves, and emergency equipment such as CPR barriers. Employers must also consider additional supplies for specific hazards identified in their workplace risk assessments conducted under provincial OHS legislation.

CliniEco nitrile examination gloves

Provincial OHS Requirements Across Canada

While CSA Z1220-17 serves as a national baseline, provincial and territorial OHS regulations may impose additional requirements that employers must address:

British Columbia — WorkSafeBC requires first aid kits to meet its own schedule A, B, or C depending on workforce size and risk classification. Remote worksites have additional requirements for transportation and communication equipment.
Ontario — Regulation 1101 under the Workplace Safety and Insurance Act specifies first aid kit contents by number of employees per shift. Ontario also mandates that at least one worker per shift hold a valid first aid certificate.
Alberta — OHS Code Part 11 requires first aid supplies that align with CSA Z1220-17 and additional items for remote or high-hazard sites, including stretchers and splints for certain classifications.
Quebec — CNESST standards reference CSA Z1220-17 with supplementary requirements for specific industries such as construction and forestry.
Atlantic provinces — Generally adopt CSA Z1220-17 with minor provincial adjustments for travel distances to medical facilities.

Employers operating in multiple provinces should procure kits that meet the most stringent applicable standard to simplify inventory management across locations.

Essential Products for Workplace First Aid Kits

A compliant workplace first aid kit should include, at minimum, the following categories of supplies, with quantities scaled to workplace size and risk level:

Adhesive bandages in various sizes (assorted pack)
Sterile gauze pads and conforming gauze rolls
Medical tape for securing dressings
Antiseptic wipes or antimicrobial solution
Disposable examination gloves (nitrile recommended to accommodate latex sensitivities)
CPR barrier devices with one-way valve
Instant cold packs for sprains and strains
Scissors, tweezers, and splinter probes
First aid reference guide or quick-reference card
Triangular bandages for slings and immobilization

Recommended Products from CliniEco

The CliniEco Cotton Swabs — Double-Tipped, 6-Inch, 100-Pack are a general-purpose component for cleaning and applying antiseptics in workplace first aid kits. The individually wrapped, single-use format keeps each swab clean until use, and the double-tipped design provides twice the usable surface area per swab.

The CliniEco Medical Tape (Hypoallergenic Paper, 1-Inch x 10 Yards) provides reliable dressing fixation for a wide range of wound types. Its hypoallergenic formulation reduces the risk of contact dermatitis for workers with sensitive skin, making it suitable for prolonged use in occupational settings.

The CliniEco Tongue Depressors — Birch Wood, 1.8mm, 100-Pack serve general first-aid and examination tasks, from oral examination to applying local treatments. The 100-pack box suits institutional and workplace kit configuration and restocking.

First Aid and Emergency Response Kits for Canadian Workplace

Kit Configuration and Refill Strategies

For Canadian employers managing multiple worksites, a structured kit management program is essential for maintaining compliance. Recommended practices include:

Standardized kit configurations per workplace type (office, warehouse, remote site) to simplify training and restocking. Maintain a master inventory list for each configuration.
Regular inspection schedules — Monthly checks for expired or depleted supplies, with documentation per OHS record-keeping requirements. Assign responsibility to a designated first aid attendant.
Bulk refill packs — Purchasing supplies in institutional quantities reduces per-unit cost and ensures consistent availability across all worksites. Consider an annual supply contract with automatic replenishment.
Emergency response enhancements — For high-hazard workplaces, consider adding tourniquets, haemostatic dressings, and automated external defibrillators (AEDs) as supplementary equipment beyond the CSA minimum.

Conclusion

Meeting CSA Z1220-17 and provincial OHS first aid requirements is an essential component of Canadian workplace safety management. By procuring quality supplies with appropriate specifications and maintaining a systematic inspection and restocking program, employers can ensure regulatory compliance and worker protection. CliniEco offers a dependable range of first aid consumables suitable for workplace kit configuration and bulk replenishment across Canada.