Medical Face Masks: ASTM Level 1 vs Level 2 vs Level 3 — What’s the Difference?

ASTM Level 1: Low-Barrier Protection

ASTM level 1 masks are classified as low-barrier medical face masks. They offer a minimum of 95% BFE and PFE, with fluid resistance of 80 mmHg. These masks are designed for general use in low-risk, non-surgical environments where there is minimal exposure to fluids, sprays, or aerosols. Common applications include:

Nitrile vs other glove types comparison

  • General patient care and examinations
  • Dental cleanings and routine checkups
  • Outpatient clinics and urgent care centers
  • Laboratory settings with low splash risk
  • Standard administrative and reception areas in medical facilities

The key advantage of Level 1 masks is their superior breathability. With the lowest differential pressure requirements (less than 4.0 mm H₂O/cm²), they are comfortable for extended wear throughout a full clinical shift. CliniEco’s ASTM F2100 procedural masks delivers reliable protection while keeping staff comfortable during long hours of use.

ASTM Level 2: Moderate-Barrier Protection

Level 2 masks provide moderate-barrier protection with fluid resistance of 120 mmHg. They raise the filtration minimums to ≥98% BFE and ≥98% PFE — above the ≥95% Level 1 floor — while adding splash resistance. These masks are appropriate for procedures with a moderate risk of fluid exposure, such as:

  • Minor surgical procedures
  • Suturing and wound care
  • Phlebotomy and IV insertion
  • Dental procedures involving moderate aerosol generation

The trade-off for increased fluid resistance is reduced breathability. Level 2 masks have a differential pressure ceiling of 5.0 mm H₂O/cm², making them slightly less comfortable for all-day wear compared to Level 1 alternatives.

Medical Face Masks: ASTM Level 1 vs Level 2 vs Level 3 — Wha

ASTM Level 3: High-Barrier Protection

Level 3 masks represent the highest tier of ASTM protection, with fluid resistance of 160 mmHg and ≥98% BFE and ≥98% PFE minimums. These masks are intended for high-risk environments where heavy fluid exposure is expected, including:

  • Major surgery and operating rooms
  • Trauma and emergency departments
  • Procedures involving power tools, laser plumes, or heavy aerosolization
  • Laboratories handling bloodborne pathogens or infectious materials

Level 3 masks are the least breathable of the three categories, with a differential pressure ceiling of 5.0 mm H₂O/cm². While essential for high-risk settings, they can contribute to fatigue and discomfort during extended wear, making them a poor choice for routine, low-exposure applications.

ASTM level 1, 2 and 3 side by side: which number decides your order?

Print this sheet and post it with the mask stock. Print this table

Performance measure Level 1 Level 2 Level 3
Fluid resistance (synthetic blood) 80 mmHg 120 mmHg 160 mmHg
Bacterial filtration efficiency (BFE) ≥95% ≥98% ≥98%
Particulate filtration efficiency (PFE) ≥95% ≥98% ≥98%
Differential pressure (breathability) Less than 4.0 mm H₂O/cm² Up to 5.0 mm H₂O/cm² Up to 5.0 mm H₂O/cm²
Where it fits General patient care, dental cleanings, outpatient and laboratory work with low splash risk Minor procedures, suturing and wound care, phlebotomy, moderate aerosol Major surgery, trauma and emergency, power tools or laser plumes, bloodborne pathogen work

ASTM F2100 grades a medical face mask across four tests — bacterial filtration efficiency, particulate filtration efficiency, fluid resistance and differential pressure — so a tiered approach keeps cost and comfort honest: Level 1 for general care, Level 2 for moderate-risk procedures, Level 3 for high-risk environments. Standardising everyone on Level 3 spends more and, because it is the least breathable, can lower compliance.

How to Choose the Right ASTM Level

Selecting the appropriate ASTM level comes down to a risk-based assessment of your clinical environment. For the majority of ambulatory care, dental, and outpatient settings, ASTM level 1 masks deliver sufficient protection with maximum comfort and the lowest cost. Level 2 is the go-to for minor surgical procedures, while Level 3 should be reserved for operating rooms and high-exposure scenarios.

Facilities that standardize on Level 2 or Level 3 masks for all personnel often incur unnecessary expenses and may experience lower staff compliance due to discomfort. A tiered approach — using Level 1 for general care, Level 2 for moderate-risk procedures, and Level 3 for high-risk environments — is both clinically sound and cost-effective.

Why CliniEco’s 3-Ply ASTM Level 1 Mask?

CliniEco Medical’s ASTM F2100 procedural masks is engineered for North American healthcare procurement professionals who demand reliable quality, consistent supply, and competitive pricing. Each mask features three layers of protection: a soft outer layer, a high-filtration melt-blown middle layer, and a comfortable inner layer. Designed for all-day wear with adjustable nose wire and soft ear loops, our Level 1 masks meet or exceed ASTM F2100-11 requirements while maintaining excellent breathability.

By choosing the right ASTM level for your facility, you protect your staff, optimize your budget, and ensure your patients receive care in a safe environment. Explore CliniEco’s full range of medical face masks, 3-ply masks, and ASTM level 1 masks to find the right solution for your healthcare practice.

Planning monthly volumes? gloves and PPE supply planner — it estimates monthly volumes and cost, and prints a checklist you can tick off with your team.

Related Reading

Explore more guides in this category:

Related reading

Frequently Asked Questions

What is the difference between ASTM level 1, level 2 and level 3 masks?

All three levels must meet minimum filtration performance, but they differ in fluid resistance: level 1 masks resist 80 mmHg, level 2 resists 120 mmHg and level 3 resists 160 mmHg of synthetic blood. Level 1 is the most breathable, while level 3 offers the highest fluid barrier for procedures with splash risk.

What does ASTM F2100 actually measure?

ASTM F2100 sets performance requirements for medical face masks across four tests: bacterial filtration efficiency (BFE), particulate filtration efficiency (PFE), fluid resistance, and differential pressure (breathability). A mask earns its level rating only when it passes the full battery.

Which ASTM level should a dental clinic use?

Most dental procedures generate aerosols and droplets, so many Canadian dental clinics standardize on level 2 or level 3 masks for treatment rooms. Level 1 is often used for administrative or low-risk areas where breathability matters more than fluid resistance.

Do ASTM level 3 masks block more bacteria than level 1?

ASTM F2100 sets the filtration floor at ≥95% BFE and PFE for Level 1 and ≥98% for Levels 2 and 3. The main difference is fluid resistance: level 3 handles higher splash pressure, which matters when blood or saliva is likely to strike the mask.

Where can Canadian clinics buy ASTM level 3 masks?

CliniEco Medical supplies ASTM level 3 masks in 50-pack boxes for clinics and dental practices across Canada. ASTM F2100 procedural masks suit administrative and low-exposure areas, and the Aurelia level 2 mask covers the middle tier.

Also read: see our complete infection-prevention PPE guide for Canadian healthcare.

Already working with clinics? Become a regional representative.