Mask lines in this guide: 3-ply ASTM Level 2 procedural mask — 50 per box, 500 per case · Aurelia Level 3 mask, made in Canada — 50 per box · wholesale mask accounts.

What do the ASTM F2100 levels mean for a Canadian buyer?
- ASTM F2100 sorts medical face masks into Level 1, 2 and 3 using bacterial filtration efficiency (BFE), particle filtration efficiency (PFE), differential pressure (breathability) and fluid resistance.
- Level 2 requires BFE ≥ 98%, PFE ≥ 98% and 120 mmHg fluid resistance; Level 3 keeps the same filtration floors and raises fluid resistance to 160 mmHg.
- All three levels are also flame-spread tested under 16 CFR Part 1610 and must reach Class 1 or better.
- Importers and distributors of medical masks in Canada hold a Medical Device Establishment Licence (MDEL); CliniEco Medical distributes under MDEL #35334.
ASTM F2100 Levels Explained: Level 1, Level 2, and Level 3
ASTM F2100 establishes three performance levels for medical face masks, each suited to different clinical scenarios:
- ASTM Level 1 (Low Barrier): Provides a BFE ≥ 95% and fluid resistance of 80 mmHg. These are recommended for general procedures, surgical admissions, and low-risk settings where no significant fluid exposure is expected. Level 1 masks offer the highest breathability (MDR ≤ 4.0), making them comfortable for extended wear. CliniEco's ASTM Level 1 procedural mask is a recognized choice for general hospital use.
- ASTM Level 2 (Moderate Barrier): Delivers BFE ≥ 98%, PFE ≥ 98%, and fluid resistance of 120 mmHg. These masks are suitable for moderate-risk procedures involving potential splash or spray, such as blood draws, suturing, or minor surgical assistance.
- ASTM Level 3 (High Barrier): Provides the highest protection with BFE ≥ 98%, PFE ≥ 98%, and fluid resistance of 160 mmHg. Level 3 masks are recommended for high-risk surgical environments including orthopaedic, cardiac, or trauma surgery where significant fluid exposure is likely.
All three levels require flame spread testing per 16 CFR Part 1610, classifying masks as Class 1 or better for surgical safety.
Which mask level and pack format should a clinic order?
| Mask | ASTM level | Filtration evidence | Fluid resistance | Pack and price (CAD) |
|---|---|---|---|---|
| 3-ply procedural mask (Aurelia 2120, made in Quebec) | Level 2 | BFE > 99.9%, PFE 99.8–99.9% | 120 mmHg | 50 per box $5.99; 500 per case $51.99 |
| Aurelia medical face mask, made in Canada | Level 2 | BFE and PFE ≥ 98% (Nelson Labs report PRB22172-SUP01) | 120 mmHg | 50 per box $7.49; 500 per case $64.99 |
| Aurelia medical face mask, made in Canada | Level 3 | BFE and PFE ≥ 98% (Nelson Labs report PRB22172-SUP01) | 160 mmHg | 50 per box $7.99; 500 per case $69.99 |
| Individually wrapped surgical mask, 3-ply | Level 2 | Supplied to the ASTM F2100 Level 2 specification; single paper pouch | 120 mmHg | 500 per case $119.99 ($0.24 per mask) |
Do medical masks need an MDEL in Canada?
In Canada, all medical masks sold to healthcare institutions must comply with the Medical Devices Regulations (SOR/98-282) under the Food and Drugs Act. Manufacturers and importers must obtain a Medical Device Establishment Licence (MDEL) to legally distribute medical face masks in Canada.
The MDEL application process requires:
- A quality management system meeting ISO 13485 or equivalent standards
- Documented evidence of compliance with ASTM F2100 or an equivalent recognized standard
- Establishment of complaint handling, recall, and adverse incident reporting procedures
- Payment of applicable licensing fees to Health Canada
Health Canada maintains a public MDEL database that hospital procurement teams should consult to verify a supplier's authorization status before purchase. As referenced in Health Canada's guidance document Medical Masks and Respirators: Guidance on Regulatory Requirements, only devices from licensed establishments should be considered for healthcare use.
Selecting the Right Mask Level by Clinical Setting
Choosing the appropriate ASTM F2100 level depends on the specific clinical setting and anticipated exposure risks:
- General ward rounds, patient transport, administrative areas: ASTM Level 1 provides adequate barrier protection with maximum comfort for all-day wear. The CliniEco ASTM Level 1 mask is an effective option for these routine applications.
- Emergency departments, outpatient clinics, minor procedures: ASTM Level 2 is the recommended baseline, balancing moderate fluid resistance with good breathability for fast-paced settings.
- Operating rooms, surgical suites, intensive care: ASTM Level 3 is the established standard for environments with direct exposure to blood, bodily fluids, or aerosol-generating procedures.
Hospital supply chain managers should conduct a formal risk assessment for each clinical department and map mask levels accordingly. Many Canadian hospitals adopt a stratified approach, stocking Level 1 for general use and Level 3 for surgical departments.
Bulk Procurement Considerations for Canadian Hospitals
For institutional buyers managing large-volume mask procurement, several factors beyond ASTM level warrant attention:
- Supplier MDEL verification: Confirm the manufacturer or importer holds a valid Health Canada MDEL. This is a non-negotiable regulatory requirement.
- Consistent quality assurance: Ensure each production batch includes a certificate of conformance (CoC) referencing ASTM F2100 testing results from an accredited laboratory.
- Supply chain reliability: Evaluate lead times, minimum order quantities, and the supplier's capacity to fulfill multi-year contracts. Domestic or near-shore suppliers often provide notable supply chain advantages for Canadian healthcare institutions.
- Cost per unit vs. total cost of ownership: Lower-priced masks may compromise on filtration efficiency, breathability, or consistency—factors that directly affect clinical outcomes and staff compliance.
- Environmental considerations: Evaluate packaging efficiency, recyclability, and whether the supplier offers sustainable alternatives without compromising medical-grade performance.
Canadian hospital procurement teams that align their mask specifications with both ASTM F2100 standards and Health Canada regulatory requirements establish a more resilient and compliant supply chain. Reference documents such as the CSA Z94.4 standard on selection and use of respirators (though focused on respirators) provide complementary frameworks that procurement professionals may adapt for medical mask programs.
CliniEco Medical Team — Supporting Canadian healthcare with certified medical face masks authorized for the Canadian market.
Related Articles
- What Are Nitrile Gloves?
- Nitrile Gloves Buying Guide
- Nitrile Glove Thickness Guide
- Nitrile vs Latex vs Vinyl
Related Reading
Explore more guides in this category:
- PLA Surgical Masks: Eco-Friendly Face Mask Options for Canadian Clinics
- PLA Biodegradable Surgical Masks: The Future of Sustainable PPE for Canadian Healthcare
- Bulk Surgical Masks for Canadian Clinics: How to Calculate Your Annual Supply
Related reading: learn more about Canadian medical procurement in our business hub.
If you buy masks by the case, the gloves and PPE supply planner turns daily mask use into a monthly case count and cost, so the ASTM level you choose shows up as a real number on the budget.
Change the clinical area or the days per week and the clinic supply and cost planner re-runs the estimate for that line.
Related reading
- Campus Health Centres: Consumable Planning for Student Clinics
- Surgical Mask Quality Assurance for Canadian Hospital Supply Chains: ASTM Testing, Supplier Audits, and Batch
Frequently Asked Questions
Which ASTM F2100 level does a routine dental appointment need?
Level 1 covers standard procedural use where fluid exposure is limited, and Level 2 adds a higher fluid resistance for procedures with more splash. Level 3 is specified for heavier fluid exposure and for settings where a higher barrier is required by policy. Matching the level to the task is what the standard is for, rather than buying one level for every room. A Canada-made option at that middle tier is the Aurelia Level 2 ASTM F2100 mask in 50-count boxes.
How does a buyer confirm a mask is intended for medical use in Canada?
Look for an ASTM F2100 performance claim on the box and an establishment licence number for the importer. The number identifies the establishment that holds the licence; it does not certify the individual mask, so the specification on the box is what you compare. CliniEco Medical is a licensed medical device establishment (MDEL #35334), and the mask specifications are printed on each case.
What do the BFE and PFE percentages on the box mean?
BFE is bacterial filtration efficiency and PFE is particle filtration efficiency, both measured at a defined particle size in the standard's test method. Level 1 requires 95 percent or more on both measures, and Levels 2 and 3 require 98 percent. A box showing only one figure, or no test method, is not giving you the comparison you need.
Do all aerosol-generating procedures need a Level 3 mask?
Not automatically. The mask level is one input; the procedure, the room ventilation and provincial guidance determine what is worn. Where a clinic wants a single stocked level for every room, Level 3 is the choice most often made, and the Level 3 three-ply mask covers that. Rooms with light exposure can run a Level 1 procedural mask instead.
Does a Canadian clinic have to buy masks from a licensed establishment?
Yes. Only establishments that hold a Medical Device Establishment Licence may import or distribute medical devices in Canada, so procurement should confirm the MDEL before a purchase order is issued. CliniEco Medical distributes under MDEL #35334.
Is a Level 3 mask required for every dental appointment?
No. The level follows the fluid exposure expected in the procedure: Level 1 for low-risk contact, Level 2 where splash or spray is possible, Level 3 where fluid exposure is likely. The setting alone does not set the level.