Quick facts: three advanced dressing families
- Foam absorbs. It is the workhorse for moderate-to-heavy exudate and needs a secondary cover.
- Silicone releases. It adheres to dry skin, not to a moist wound bed, so removal is atraumatic and the same sheet can be reused.
- Hydrocolloid occludes. A self-adhesive wafer gels on contact with exudate and is changed every three to five days.
- Exudate volume is the first filter. Heavy exudate rules hydrocolloid out; fragile skin rules out aggressive adhesive.
- All three are generally Class II devices under the Medical Devices Regulations (SOR/98-282), so the seller must hold an establishment licence.
Sterile self-adhesive foam for moderate-to-heavy exudate: CliniEco Advanced Foam Wound Dressing — Sterile, Self-Adhesive, 4×4 in.
Silicone Dressings: Gentle Adhesion and Scar Management
Silicone dressings utilise medical-grade silicone polymers that create a soft, conformable interface with the wound bed. Their key advantage is atraumatic removal — silicone adheres to dry skin but not to moist wound tissue, making them suitable for fragile skin, paediatric patients, and wounds requiring frequent dressing changes. Silicone sheets are widely used for hypertrophic scar management and keloid prevention. The CliniEco Silicone Scar Therapy Sheet offers a reusable medical-grade option for post-surgical and burn scar protocols. Silicone dressings maintain a hydrated environment while allowing gas exchange, and their transparency enables visual wound assessment without removal. For Canadian healthcare administrators, silicone products reduce dressing-related trauma and associated nursing time costs.

Hydrocolloid Dressings: Self-Adhesive Barrier Protection
Hydrocolloid dressings consist of a self-adhesive wafer containing gel-forming agents such as carboxymethylcellulose, pectin, and gelatin. Upon contact with wound exudate, the hydrocolloid layer forms a soft gel that maintains a moist environment and provides a waterproof bacterial barrier. These dressings are indicated for low-to-moderate exudating wounds, including pressure ulcers in early stages, superficial burns, and minor abrasions. Hydrocolloids require less frequent changes — typically every three to five days — reducing supply utilisation and nursing labour. Their occlusive nature supports autolytic debridement, making them appropriate for sloughy wounds. Procurement managers should note that hydrocolloid dressings are less suitable for infected wounds or heavy exudate due to limited absorption capacity.
How to Choose: Decision Matrix by Wound Type
- Heavy exudate, partial-thickness wounds: Foam dressing (high absorption, moisture management)
- Fragile skin, scar management, atraumatic removal needed: Silicone dressing (gentle adhesion, reusable option)
- Low exudate, shallow wounds, extended wear time: Hydrocolloid dressing (occlusive barrier, fewer changes)
- Infected or critically colonised wounds: Avoid hydrocolloid; consider foam with antimicrobial properties
- Securing any dressing on challenging anatomy: Use CliniEco Hypoallergenic Paper Tape for sensitive skin fixation
- Wound cleansing and preparation: Use the swab your wound-care protocol specifies for the wound bed; keep individually wrapped, non-sterile CliniEco Cotton Swabs for cleaning equipment and applying topical preparations away from the wound
Canadian Regulatory Standards for Wound Care Products
All advanced wound dressings distributed in Canada must comply with Health Canada's Medical Devices Regulations (SOR/98-282). Foam, silicone, and hydrocolloid dressings are typically classified as Class II medical devices, requiring a medical device licence (MDL) or a medical device establishment licence (MDEL) for importation and sale. Additionally, manufacturers should demonstrate quality management systems aligned with ISO 13485:2016, the international standard for medical device quality management. Canadian healthcare procurement policies often mandate that suppliers maintain ISO 13485 certification and provide their establishment licence number in tender submissions. Procurement managers should verify these credentials when evaluating wound care product vendors to ensure regulatory compliance and patient safety.
Building a Complete Wound Care Kit
A well-provisioned wound care inventory includes multiple dressing categories to address varying clinical presentations. Foam dressings serve as the workhorse for moderate-to-heavy drainage. Silicone products address scar therapy and atraumatic dressing needs. Hydrocolloid dressings provide a cost-effective solution for low-exudate maintenance care. Supporting supplies — including medical tape for secure fixation and sterile swabs for wound cleansing — complete the formulary. By matching product selection to wound characteristics and regulatory requirements, Canadian healthcare procurement teams can optimise both clinical outcomes and supply chain efficiency across their facilities.
Wound care rooms still reprocess reusable instruments, so a monthly monitoring record matters: a 25-pack of 24-hour biological indicators covers five weeks of daily spore testing.
Sterile dressing stock depends on a release record that holds up. Dressings released from a reprocessing area rest on the same four record groups a clinic already keeps for its instruments. The printable sterilization log sheet lays out the load log, service and maintenance log, malfunction log and package-label fields in the field order of the RCDSO IPAC Self Audit Review Form (v2); the same page carries a log and package-label generator turns a month of cycles into a dated sheet you can print and file.
Have a question about your own facility? Send it in and you will get a written answer specific to your setup, with the regulation or standard it is based on cited. Ask your compliance question.
Which dressing fits which wound and exudate level?
The three families are usually compared on material, but the purchasing decision turns on three variables: how much exudate the wound produces, how fragile the surrounding skin is, and how often a clinician can attend.
| Dressing | Exudate level | Change interval | Secondary cover | Where it is the wrong choice |
|---|---|---|---|---|
| Foam | Moderate to heavy | 3–7 days | Required | Dry wounds and eschar, where there is nothing to absorb |
| Silicone | Low to moderate | 3–7 days, reusable sheet | Usually required | Heavily exuding wounds, where it will not stay in place |
| Hydrocolloid | Low | 3–5 days | Not required | Infected or heavily exuding wounds and diabetic foot ulcers without specialist review |
Read down the exudate column first: a heavily exuding wound narrows the choice to foam, and a fragile surrounding skin narrows the adhesive choice to silicone. Price per dressing is the last comparison, not the first, because a dressing that is changed twice as often costs more than its unit price suggests.
Do these dressings need a secondary cover, and does that change what you stock?
It does, and it is the item most often left off the order.
- Foam is permeable and needs a film or an absorbent secondary pad to keep it in place and protect clothing and bedding.
- Silicone contact layers are typically held with a secondary absorbent dressing or a bandage, depending on site.
- Hydrocolloid is self-adhesive and waterproof, so it is used as the outer layer.
For a wound care cart, that means foam and silicone lines are ordered together with the fixation and absorbent layer they depend on, and hydrocolloid is ordered as a standalone.
Related Reading
- PHA in Wound Care: Biodegradable Dressings for Modern Clinics
- Building a Wound Care Cart for Canadian Clinics
- Wound Dressing Selection: Foam vs Gauze for Canadian Clinical Practice
- Silicone Scar Sheets vs Silicone Scar Gel: Which Should You Choose?
- Keloid vs Hypertrophic Scars: What Changes Treatment?
Yes. Foam, silicone and hydrocolloid dressings are generally Class II medical devices under the Medical Devices Regulations (SOR/98-282), so the importer or distributor selling them must hold a medical device establishment licence (MDEL). Procurement teams should ask for that licence number and for ISO 13485:2016 quality management documentation before a tender.
Frequently Asked Questions
Which dressing suits a heavily exuding wound?
A foam dressing. Foam handles moderate-to-heavy exudate and keeps the wound bed moist without macerating the surrounding skin. Hydrocolloids are a weaker fit for heavy exudate because their absorption capacity is limited, and an occlusive wafer that cannot cope will leak at the edges.
When should a silicone dressing be chosen instead of a hydrocolloid?
Choose silicone when the skin is fragile, when the dressing has to come off without trauma, or when the goal is scar management. Silicone adheres to dry skin but not to moist wound tissue, so removal is gentle, and silicone sheets are widely used for hypertrophic scars and keloid prevention. Hydrocolloids suit low-exudate, shallow wounds with longer wear times.
How often do hydrocolloid dressings need to be changed?
Typically every three to five days, depending on exudate level and the manufacturer's instructions for use. Contact with exudate turns the wafer into a gel that supports autolytic debridement and cuts the number of changes — but the dressing should be lifted sooner if exudate escapes past the edges or the seal breaks.
Are advanced wound dressings regulated in Canada?
Yes. Foam, silicone and hydrocolloid dressings are generally Class II medical devices under the Medical Devices Regulations (SOR/98-282), so the importer or distributor selling them must hold a medical device establishment licence (MDEL). Procurement teams should ask for that licence number and for ISO 13485:2016 quality management documentation before a tender.
Last updated: September 2026. CliniEco Medical is a licensed medical device establishment (MDEL #35334).
Can a hydrocolloid dressing be used on an infected wound?
Not as the primary dressing. A hydrocolloid is an occlusive wafer, and sealing an infected wound under an occlusive layer traps exudate and organisms against the bed. Infection is managed with cleansing and an appropriate antimicrobial or absorbent dressing under clinical direction, and the hydrocolloid is reserved for low-exudate, non-infected wounds. CliniEco Medical is a licensed medical device establishment (MDEL #35334).