First Aid Kit Refill Supplies: What Canadian Facilities Need to Stock for OSHA and Provincial Compliance

Workplace first aid compliance is a critical responsibility for facility managers and safety officers across Canada. This guide covers the essential first aid refill supplies your facility needs to maintain alignment with OSHA Canada standards and provincial workplace safety regulations.

Quick facts: first aid refills in Canada

  • There is no OSHA in Canada. Federally regulated workplaces follow Part 16 of the Canada Occupational Health and Safety Regulations; every other workplace follows its provincial or territorial OHS rules.
  • CSA Z1220-17 is the kit standard both levels point to. Three kit types — Type 1 personal, Type 2 basic, Type 3 intermediate — each in small, medium and large.
  • Size tracks workers per shift, not headcount on the payroll. The small Type 2 kit is written for roughly 2 to 25 workers per shift.
  • Refills fail on the high-turn items first. Adhesive bandages, gauze and antiseptic wipes empty long before the scissors go missing.
  • An inspection is a records check. A monthly check sheet with initials is what turns a stocked cabinet into a compliant one.

Cloth tape that survives an industrial cabinet: medical tape, cloth, 1 inch by 10 yards, 36 rolls.

Looking for the supplies in this guide? We stock them in Canada and ship from Toronto.

Biological indicators (24-hour, 25-pack)  ·  Post-procedure repair masks (med spa)  ·  Clinic supplies →  ·  Wholesale & clinic accounts  ·  Free sterilization log tool  ·  Ask a compliance specialist

Minimum Contents per CSA Z1220

The Canadian Standards Association standard CSA Z1220 outlines the minimum requirements for first aid kits in Canadian workplaces. A compliant kit must include a comprehensive selection of first aid refill supplies such as:

  • Adhesive bandages in multiple sizes (at least 25 per 50-person kit)
  • Sterile gauze pads (4 x 4 inches, minimum 8 per kit)
  • Conforming gauze rolls (2 rolls, 7.5 cm width)
  • Adhesive tape (surgical, 2.5 cm width)
  • Triangular bandages (minimum 2)
  • Antiseptic wipes or solution (minimum 10 individual packs)
  • Disposable gloves (nitrile, minimum 4 pairs)
  • CPR barrier mask with one-way valve
  • Scissors and tweezers
  • First aid reference guide

CSA Z1220 also requires that kits be clearly labelled, water-resistant (Type 1, 2, or 3 depending on environment), and inventoried at regular intervals. Facilities subject to multiple jurisdictions should meet the stricter of applicable requirements to ensure seamless compliance.

Refill Schedules: How Often Should You Restock?

Regular workplace first aid restocking is not a "set it and forget it" exercise. Inspections should occur at least monthly, and immediately after any incident where supplies were used. Key elements of a reliable refill schedule include:

  • Monthly visual inspection: Check seals and expiry dates on sterile items
  • Quarterly full inventory: Cross-reference contents against CSA Z1220 checklists
  • Post-incident restocking: Replenish within 24 hours of use
  • Annual review: Assess if kit size and contents still match your workforce count and hazard profile

Using a digital inventory tracker or a dedicated first aid restocking log can help facility managers manage these intervals and avoid fines during workplace inspections.

Must-Stock Items for Canadian Workplaces

Beyond the CSA minimums, certain high-use consumables require special attention. These must-stock items are the most frequently depleted and should always be available in your first aid refill supplies inventory:

  • Antibiotic ointment (bacitracin zinc or polysporin) — essential for preventing infection in minor wounds
  • Burn treatment supplies (gel-soaked dressings and coolant)
  • Cold packs (instant-activating, single-use)
  • Eye wash solution (sterile, single-use pods)
  • Fabric first aid tape — more versatile than paper tape for industrial environments
  • Large trauma dressings (for heavier bleeding control)
  • Splints (malleable or rigid) for fracture immobilization

CliniEco Antibiotic Ointment is an effective choice for wound care in any Canadian facility, providing broad-spectrum protection in single-use packaging that meets CSA requirements.

First aid kit refill supplies organized and ready for restocking

OSHA Canada vs. Provincial Regulations: Key Differences

While OSHA (Canada) Part 16 of the Canada Occupational Health and Safety Regulations sets baseline requirements for federally regulated workplaces, each province has its own workers' compensation board or occupational health and safety act. Notable differences include:

  • British Columbia (WorkSafeBC): Requires additional burn care items in high-risk industries
  • Ontario (OHSA): Mandates that first aid attendants receive WSIB-approved training for workplaces over 200 employees
  • Alberta (OHS Code): Specifies kit contents based on Part 18 — three categories (A, B, C) depending on hazard level
  • Quebec (CNESST): Requires bilingual (French and English) labelling on all first aid supplies
  • Federal workplaces: Must follow Canada Labour Code Part II — the most comprehensive standard, frequently updated

Choosing OSHA Canada-aligned refill packs that also meet provincial requirements reduces administrative overhead and ensures coverage across multi-province operations. Facilities operating in multiple provinces should stock to the strictest applicable standard.

Bulk Refill Kits: Streamlining Your Supply Chain

Ordering first aid refill supplies in bulk via prepackaged refill kits simplifies inventory management and often reduces per-unit costs. Many suppliers offer ANSI- and CSA-compliant refill packs segmented by kit size (10-person, 25-person, 50-person, etc.). Benefits include:

  • Pre-verified contents that match certification checklists
  • Reduced ordering frequency and lower administrative overhead
  • Consistent product quality across restocking cycles
  • Easy substitution for expired or depleted components without replacing the entire kit

CliniEco's 50-Person Workplace First Aid Kit provides a solid foundation that can be maintained with matching refill packs, ensuring your facility stays compliant with a single procurement source.

Bulk first aid refill kits for workplace compliance

Cost-Saving Tips for Ongoing Compliance

Maintaining compliant first aid cabinets does not have to strain your operations budget. Consider these practical approaches:

  • Establish a par level system: Track usage patterns and set minimum stock thresholds for each supply item. Reorder automatically when levels drop.
  • Consolidate suppliers: Use a single vendor for all first aid refill supplies to qualify for volume pricing and reduce shipping costs.
  • Train employees on waste reduction: Proper use of items like gloves and antiseptic wipes reduces unnecessary depletion.
  • Schedule combined inspections: Align first aid restocking with other safety walkthroughs to minimize labour overhead.
  • Buy refill packs, not full kits: Replacing only the consumed components costs significantly less than purchasing entirely new units each cycle.

Which CSA Z1220 kit does a workplace actually need?

The standard classifies kits by type and size, and the two variables answer different questions: type follows the risk of the work, size follows how many workers are on shift at once. Getting either one wrong produces a cabinet that passes a glance and fails an inspection.

Kit Written for Size and worker count per shift What changes in practice
Type 1 — personal Workers in isolation, or without access to a workplace kit One kit per worker or per small crew Small format, carried rather than mounted; checked before each shift rather than monthly
Type 2 — basic Low to moderate risk workplaces Small: about 2–25 · Medium: 26–50 · Large: 51–100 The default for clinics, offices and retail; quantities scale with the size band
Type 3 — intermediate Higher risk work, where serious injury is plausible Small, medium and large against the same shift counts Adds the dressings and equipment a higher-risk injury needs; usually paired with trained first aiders

Above 100 workers per shift the standard expects kits to be distributed through the workplace rather than enlarged without limit, because a single cabinet at one end of a building is not accessible in the sense the standard means. Multi-floor sites and sites with separated buildings usually need more kits, not bigger ones.

The type decision belongs to a workplace risk assessment, which is also where site-specific additions come from — a burn station in a kitchen, eye-wash pods in a lab, a splint where the nearest ambulance is thirty minutes out. The provincial rules then layer on top: some jurisdictions name additional contents for particular industries, and Quebec requires bilingual labelling on first aid supplies.

Why does the kit keep running out between inspections?

Kits rarely fail because the wrong items were bought. They fail because the restocking rhythm is set by the calendar rather than by consumption. Adhesive bandages, gauze pads and antiseptic wipes leave the cabinet in ones and twos, and a monthly visual check catches the gap only after it has existed for three weeks.

Three measures fix it without adding staff time. Set a par level per item from three months of actual usage rather than from the standard's minimum, so the cabinet is restocked when it drops to par instead of when it empties. Restock after every incident, on the same day, with the person who used the supplies. And check the two dates that quietly invalidate a kit: the expiry on sterile items and the seal on individually wrapped dressings, which fails silently in a humid cabinet.

How do you keep a multi-site first aid program auditable?

One register, one check sheet, one expiry sweep. The register lists every kit by site and location with its type and size, so a new manager can see what exists without touring the buildings. The check sheet records the monthly inspection with a date, an initials column and a short list of what was replenished. The expiry sweep runs quarterly and pulls anything within one quarter of its date, which is cheaper than replacing a kit that failed an inspection because of a sealed dressing from two years ago.

Where a site is federally regulated, cite Part 16 of the Canada Occupational Health and Safety Regulations in the register; where it is provincially regulated, cite the province's first aid section. One register that names the applicable rule per site is what makes a multi-province program defensible, and it is the document an officer asks for first.

By understanding CSA Z1220 minimums, provincial variations, and smart procurement strategies, Canadian facility managers can keep their teams protected year-round.

Keeping a first-aid kit at par? The first-aid supply planner estimates monthly bandage, dressing and antiseptic volumes from your staff count and sites.

Change the number of kits or sites and the clinic supply and cost planner re-runs the first-aid line for you.

Unsure what a refill kit has to contain to meet the requirement? Ask a sterilization compliance specialist how the standard reads for your facility, with the reference cited.

Related reading: see the full dental compliance hub for RCDSO-ready checklists.

see our RCDSO sterilization monitoring guide for the daily BI requirement in Ontario.

Need these supplies for your facility? CliniEco Medical serves Canadian clinics, laboratories and long-term care homes. Open a wholesale account for institutional pricing.

Frequently Asked Questions

Does Canada have an OSHA?

No. OSHA is a United States agency. In Canada, federally regulated workplaces — banks, telecommunications, interprovincial transport, federal crown corporations — fall under Part 16 of the Canada Occupational Health and Safety Regulations, which is enforced by the federal labour program. Every other workplace is covered by its province or territory's occupational health and safety legislation and first aid regulation. Both levels reference CSA Z1220-17 for kit contents, but the enforcement body, the inspection regime and the penalty structure are different.

How often should a workplace first aid kit be inspected?

Monthly is the working standard, with an immediate restock after any incident that used supplies. The legal requirement varies by jurisdiction and is usually expressed as keeping the kit complete and in good order, which is a continuous obligation rather than a calendar date. A dated check sheet turns that obligation into evidence: it shows the kit was inspected, who inspected it and what was replaced, which is what an officer reviews when the cabinet itself looks full.

Can a facility replenish a kit with items from a retail pharmacy?

It can, but the kit may stop being a compliant kit. CSA Z1220 specifies quantities and formats — individually wrapped sterile dressings, a CPR barrier device with a one-way valve, antiseptic towelettes in individual packs — and pharmacy items often meet the function without matching the specified format. Mixing sources also breaks the paper trail: a refill pack that arrives with a contents list is easier to reconcile against the standard than a collection of loose purchases.

What is the difference between a refill pack and a new kit?

A refill pack contains the consumables that deplete; a kit contains those plus the durable components — scissors, tweezers, the container itself, the reference guide. Replacing the consumables through refill packs costs less and produces less waste than buying a complete kit each cycle, provided the durable items are still present and functional. The exception is a kit whose container has cracked or whose label has become unreadable, because those are the parts an inspection sees first.

Do provinces require different contents than CSA Z1220?

Some do. CSA Z1220 is a national standard, and provincial first aid regulations were written before and alongside it; several jurisdictions now reference the standard directly while others still publish their own content tables, and a few add industry-specific items such as burn care supplies in high-risk sectors. Quebec adds a language requirement for labelling. A multi-site employer is safest stocking to the strictest applicable rule per site and recording which rule that is.

How many kits does a building need?

Enough that any worker can reach one without leaving the work area the standard is protecting, which in practice means one kit per floor or per separated work zone, plus personal kits for workers who work alone or travel. The count is a function of layout and travel distance, not of headcount alone. Sites that are large or multi-level should document the reasoning, because the number of kits is one of the first questions asked after an incident.

CliniEco Medical is a licensed medical device establishment (MDEL #35334).

Already working with clinics? Become a regional representative.