ASTM Mask Levels Explained: What Canadian Clinics Need to Know

Based on these tests, masks are rated as Level 1, Level 2, or Level 3. There is no "Level 4" in ASTM F2100; anything marketed as such is outside this standard.

CliniEco nitrile examination gloves

Buying face masks? Distributed in Canada by CliniEco Medical, Toronto.

Aurelia Face Mask  ·  Aurelia Face Mask  ·  CliniEco Face Mask  ·  Wholesale & clinic accounts

Products referenced in this guide

ASTM Mask Level Comparison

Property Level 1 (Low Barrier) Level 2 (Moderate Barrier) Level 3 (High Barrier)
Fluid Resistance 80 mmHg 120 mmHg 160 mmHg
BFE (Bacterial Filtration) ≥95% ≥98% ≥98%
PFE (Particulate Filtration) ≥95% at 0.1 µm ≥98% at 0.1 µm ≥98% at 0.1 µm
Delta P (Breathability) < 4.0 < 5.0 < 5.0
Flame Spread Class 1 (slow burn) Class 1 Class 1

When to Use Each Level in Canadian Clinics

ASTM Level 1 (Low Barrier)

Level 1 masks offer the lowest fluid resistance (80 mmHg) but the best breathability. They are ideal for low-risk, non-aerosolizing procedures where fluid splash is minimal. Typical uses in Canadian clinics include:

  • General patient consultations and examinations
  • Administrative and reception areas during flu season
  • Dental hygiene cleanings
  • Community health settings with low infection risk

Level 1 masks are the most comfortable for all-day wear, making them a popular choice for front-office staff in Canadian clinics.

ASTM Level 2 (Moderate Barrier)

Level 2 masks provide moderate fluid resistance (120 mmHg) with excellent filtration (≥98% BFE/PFE). They are the standard choice for most clinical procedures. Typical uses include:

  • Suturing and minor surgical procedures
  • Blood draws and IV insertion
  • Dental procedures with moderate splash risk
  • General nursing care in hospitals and clinics

Level 2 is the most commonly specified ASTM level for Canadian clinic procurement, offering the best balance of protection and breathability for daily use.

ASTM Level 3 (High Barrier)

Level 3 masks offer the highest fluid resistance (160 mmHg) and are required when there is a risk of high-velocity fluid splash or aerosol generation. Typical uses include:

  • Oral surgery and periodontal procedures
  • Emergency department triage of respiratory patients
  • Procedures involving power tools (drills, ultrasonic scalers)
  • Any situation where significant blood or fluid splash is expected

Level 3 masks are thicker and slightly less breathable than Level 1 or 2, but provide the highest level of barrier protection under the ASTM standard.

CPAP accessories pack: mask, tubing and filters

Health Canada Requirements

Health Canada regulates medical masks as Class I medical devices. To sell ASTM level masks in Canada, manufacturers and importers must hold a valid Medical Device Establishment Licence (MDEL). The masks must also be tested by an accredited laboratory to ASTM F2100 standards.

Key compliance points for Canadian clinic procurement teams:

  • Verify the supplier holds a valid Health Canada MDEL
  • Request ASTM F2100 test reports from an accredited lab (e.g., Nelson Labs, NAMSA)
  • Ensure the mask packaging lists the ASTM level and certification
  • Confirm the masks are not expired — surgical masks have a limited shelf life

Which Level Should Your Canadian Clinic Stock?

For most Canadian clinics, a two-tier strategy works best:

  • Level 1 for admin staff, reception, and low-risk consultations
  • Level 2 or 3 for clinical staff performing procedures (choose Level 3 for high-splash dental or surgical work)

By understanding the ASTM F2100 standard and matching mask levels to clinical risk, your clinic can ensure compliance, protect staff, and control PPE costs. CliniEco Medical supplies a full range of Health Canada-compliant ASTM level masks across Canada, with bulk pricing for clinics and healthcare facilities.

Need these supplies for your facility? CliniEco Medical serves Canadian clinics, laboratories and long-term care homes. Open a wholesale account for institutional pricing.

Fixing mask levels by clinical area? The gloves and PPE supply planner estimates monthly case counts by area, so each ASTM level is planned rather than guessed.

Change the area or days per week and the clinic supply and cost planner re-runs the estimate.

Related Reading

Explore more guides in this category:

Frequently Asked Questions

What test values separate ASTM Level 1, 2 and 3 masks?

ASTM F2100 scores three things: bacterial and particle filtration efficiency, differential pressure and fluid resistance. Level 1 requires 95% BFE and PFE with resistance to 80 mmHg of synthetic blood; Level 2 raises fluid resistance to 120 mmHg and filtration to 98%; Level 3 requires 160 mmHg and 98%. Differential pressure must stay below 4.0 to 5.0 mmH2O depending on level. There is no Level 4 in ASTM F2100.

Which level does a Canadian dental or medical clinic need?

Match the level to the task, not to the room. Level 1 suits routine examinations and short procedures with no splash risk; Level 2 covers most dental hygiene, blood draws and minor procedures where splatter is possible; Level 3 is for procedures with heavy fluid exposure, such as irrigation, suction-assisted work or eye surgery. Stocking one level everywhere either over-protects housekeeping tasks or under-protects the operatory.

Does a mask need a device licence to be sold in Canada?

Medical masks are regulated as medical devices, and a Canadian importer must hold an establishment licence and keep the device documentation on file. CliniEco Medical is a licensed medical device establishment (MDEL #35334). Buyers can ask any supplier for the device licence number printed on the packaging and check that the model number on the certificate matches the carton in the storeroom.

How should masks be stored and issued in a clinic?

Keep boxes closed, off the floor and away from sunlight and chemical vapours, and issue from the box rather than leaving a stack loose on a counter. Bend the nose wire to the wearer's face and check the seal at the cheeks before starting work; a mask that gaps at the sides leaks unfiltered air regardless of its rating. CliniEco Medical stocks ASTM Level 3 and ASTM Level 2 masks in case quantities from Toronto.

What should a buyer check on a mask specification sheet?

The standard cited (ASTM F2100), the three test results with the level claimed, the bacterial filtration figure rather than a marketing phrase, the nose wire and ear loop construction, and the pack size per case. Ask whether the mask is made in Canada or imported, because that changes lead time and documentation. Aurelia Level 3 masks are made in Canada with the F2100 results published per box.

Already working with clinics? Become a regional representative.