Last month a woman in Burnaby called us with a full shopping cart of confusion. Her mother, 78, was leaking a couple of times a day. She had bought "overnight" briefs because that sounded like the most absorbent option, and "light" pads for daytime. Neither worked: the briefs were too bulky for a woman who still walks to the corner store, and the pads soaked through by noon. Her question was the one every caregiver eventually asks — what do these levels actually mean?
Short answer: a level describes how much liquid a product holds before it leaks, and the level you need tracks how much urine leaks per episode — not how much your parent drinks. Get that straight and the aisle stops being a guessing game.
Buying the supplies in this guide? Distributed in Canada by CliniEco Medical, Toronto.
CliniEco Adult Pull-On Diapers · CliniEco Catheter Accessories Kit · CliniEco Day Comfort Adult Diapers · Wholesale & clinic accounts
Products referenced in this guide
Light, moderate, heavy, overnight: what the labels mean
Manufacturers sort products into the same four buckets but call them different names. Depend uses light, moderate, maximum; TENA uses light, normal, extra, super; Attends and Kimberly-Clark run scales of their own. The buckets still line up well enough to shop across brands.
The number on the package — 500 ml, 1000 ml, 1500 ml — is how much fluid the core absorbs in a lab test before leaking. Treat it as capacity, not a schedule. Roughly: 500 ml is light-to-moderate, 1000 ml moderate-to-heavy, 1500 ml and up heavy-to-overnight. And nobody should fill a product to its rated capacity — change every three to four hours regardless.
| Level | Typical leak pattern | Approx. capacity | Product form that fits |
|---|---|---|---|
| Light | A few drops to a small gush, a few times a day | Up to 500 ml | Pads or slim pull-on briefs |
| Moderate | Small episodes 2–4 times a day | 500–1000 ml | Pull-on or tape-on briefs |
| Heavy | Full voids, several times a day | 1000–1500 ml | Tape-on briefs with leak guards |
| Overnight | Heavy voids or bedwetting at night | 1500 ml+ | Tape-on briefs plus an underpad |
A note on "overnight": the label means capacity and coverage, not a promise of hours. A wet brief left on skin until morning is how rashes start.
What does each absorbency level actually hold?
A printable card for the aisle: capacity, leak pattern, product form and change trigger. Print this table
| Band | Approx. capacity | Typical leak pattern | Product form | Change trigger |
|---|---|---|---|---|
| Light | Up to 500 mL | Drops to a small gush, a few times a day | Pad or slim pull-on | After each episode |
| Moderate | 500-1,000 mL | Small episodes two to four times a day | Pull-on or tape-on brief | Every three to four hours |
| Heavy | 1,000-1,500 mL | Full voids several times a day | Tape-on brief with leak guards | Each void plus a check |
| Overnight | 1,500 mL+ | Heavy voids or bedwetting at night | Tape-on brief plus underpad | Do not leave until morning |
The millilitre figure is a lab capacity, not a wear time; change every three to four hours regardless of the rating.
Size and absorbency are two separate decisions
The mistake I see most: buying a bigger size for more absorbency. Size is fit — hip and waist measurement. Absorbency is capacity. Oversized briefs leak at the legs no matter what the package claims. Measure the hip at its widest point, match the chart, then pick the level for the leak pattern.
Pull-on briefs suit people who are mobile and manage their own changes. Tape-on briefs open at the sides, so they work for anyone who needs help — no standing required.
A decision path: match the product to the day
Home and mobile
A moderate pull-on, changed after each episode, usually covers a normal day.
Out and about
Discretion matters more than capacity. A slim pull-on or a pad, plus a change kit in the bag, beats a bulky brief your mother will refuse to wear.
Bed-bound
Go heavy or overnight, tape-on, and add a backup layer under the sheet. We pair a heavy brief with CliniEco's heavy-absorbency disposable underpads, 30x36 inch, which makes a 2 a.m. change faster. For a full setup in one order, the CliniEco urology care kit bundles incontinence pads and underpads. Facilities buying in bulk usually prefer the 60x90 cm 5-layer underpad with SAP — vacuum-compressed, so a 50-pack takes one shelf slot.

What to ignore at the checkout
Four things trip up new caregivers:
- One level for everything. Keep a day level and a night level.
- The biggest number on the box. A 1500 ml brief worn all day is a skin problem in the making.
- Skipping skin care. Change promptly, wash gently, and let air reach the skin between changes.
- Trusting the brand name. Two brands' "heavy" can differ — read the ml figure, not the marketing.
One more check: in Canada, incontinence products sold with medical claims are regulated by Health Canada, so compliant products carry a device licence or manufacturer identifier on the label. It is a fast way to tell a medical product from a general consumer good.

Start with the leak pattern, not the label
Count episodes for two or three days before you buy: when they happen, how much, and whether the person is mobile at that moment. That record tells you the level, the style, and whether you need a backup layer. My rule after years of home care: pick the brief for the worst hour of the day, and keep an underpad for the worst surface.
If you are torn between two levels, buy the smaller first. It is easier to step up than to explain to your mother why you bought her something she can feel under her clothes.
Related Reading
Explore more guides in this category:
- Specimen Bags: 95kPa Seal Standards Explained for Canadian Labs
- Procuring Medical Supplies in Alberta: Urban Consolidation and Rural Buffer Planning
- PLA Eco-Friendly Shoe Covers: Sustainable Options in Canada
Related reading: explore our long-term care and home care resources.
start with our underpad buying guide for absorbency, sizing and cost.
Planning monthly volumes? incontinence supply planner — it estimates monthly volumes and cost, and prints a checklist you can tick off with your team.
Have a question about your own facility? Send it in and you will get a written answer specific to your setup, with the regulation or standard it is based on cited. Ask your compliance question.
Related reading
Frequently Asked Questions
What does the millilitre figure on an adult brief pack actually mean?
It is a laboratory capacity figure for the absorbent core, not a wear time. A brief rated at a higher capacity holds more fluid before leaking in a test, but nobody should fill a product to its rating. The working rule is to match the tier to the leak pattern, then change every three to four hours regardless of the number on the pack. Capacity buys margin during a night or an outing; it does not buy extra hours of wear.
Should a parent who still walks use pull-on briefs or tape-style briefs?
For someone who walks to the corner store, pull-on briefs keep independence intact: they go on and off like underwear and the sides tear for removal. Tape-style briefs are the better fit for someone who is in bed or needs a caregiver to do the change, because the tabs allow refastening and adjustment without removing the product. Mobility, not absorbency, is the deciding question.
How many briefs does one person use in a month?
At six to eight changes a day, a month works out to roughly 180 to 240 briefs, so a 120-count case covers a little over two weeks on its own. Homes that stretch changes overnight use fewer units but carry more risk of skin damage. Ordering two tiers - Day Comfort by day and Night Plus at bedtime - usually costs less than moving everyone to the heaviest brief.
Do I need underpads if I am already using briefs?
For overnight use or heavy leakage, yes. A brief handles the patient; an underpad, 30 x 36 in, heavy absorbency protects the mattress and cuts the laundry load when a brief is overwhelmed. CliniEco Medical supplies both lines, and pairing them is usually cheaper than washing sheets daily.
