{"title":"Laboratory Consumables","description":"\u003cp\u003eSingle-use laboratory consumables for specimen collection, transport and culture work — shipped from our Toronto warehouse to labs, clinics and food plants across Canada.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSterile specimen containers and specimen cups\u003c\/li\u003e\n\u003cli\u003ePetri dishes and culture-adjacent disposables\u003c\/li\u003e\n\u003cli\u003e95 kPa specimen transport bags and 3-wall transport bags\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBuying for a lab or multi-site organisation? \u003ca href=\"\/fr\/pages\/wholesale\"\u003eRequest a bulk quote\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"clinieco-specimen-cups-graduated-leak-proof-90-ml-100-pcs","title":"CliniEco Leak-Proof Sample Cups — 90 mL, 600 Cups (6 × 100-Pack Case)","description":"\u003cdiv class=\"cliniEco-product\"\u003e\n  \u003ch2\u003eCliniEco Specimen Cups – Graduated\u003c\/h2\u003e\n\n  \u003ch3\u003eProduct Overview\u003c\/h3\u003e\n  \u003cp\u003eCliniEco graduated specimen cups are precision-molded \u003cstrong\u003emedical-grade polypropylene containers\u003c\/strong\u003e designed for the safe collection, transport, and storage of urine and other liquid specimens. It is a single-use urine specimen cup for routine urine collection in clinics, laboratories and diagnostic collection sites. Clear translucent walls with bold molded graduations enable fast, accurate volume readings without the need for a separate measuring device.\u003c\/p\u003e\n\n  \u003ch3\u003eKey Features\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eClear Graduated Markings\u003c\/strong\u003e – Molded-in graduations printed in mL\/oz on the cup wall; accurate to ±5% across the measured range.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLeak-Proof Snap Cap\u003c\/strong\u003e – Tamper-evident, one-way threaded lid with a silicone gasket ensures secure sealing during transport; no spills in transit.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMedical-Grade Polypropylene\u003c\/strong\u003e – Autoclavable at 121 °C, chemically resistant to most laboratory reagents and diagnostic reagents.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCost-Effective Bulk Solution\u003c\/strong\u003e – Significantly lower per-unit cost versus glass or branded polypropylene alternatives; savings of 35–50% are typical for high-volume laboratory accounts.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCE, ISO 13485 \u0026amp; certified Certified\u003c\/strong\u003e – Meets CLIA and WHO specifications for diagnostic specimen containers.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eSpecifications\u003c\/h3\u003e\n  \u003ctable\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePolypropylene (PP), medical-grade\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCapacity\u003c\/td\u003e\n\u003ctd\u003e60 mL \/ 90 mL \/ 120 mL (options)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eGraduations\u003c\/td\u003e\n\u003ctd\u003emL and oz markings, molded-in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eLid Style\u003c\/td\u003e\n\u003ctd\u003eSnap cap with tamper-evident ring\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSterility\u003c\/td\u003e\n\u003ctd\u003eNon-clean (clean option available)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTemperature Range\u003c\/td\u003e\n\u003ctd\u003e-20 °C to 121 °C (autoclavable)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003e100 cups per bag, 10 bags per case\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eCE IVD, ISO 13485, certified 510(k) exempt\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eShelf Life\u003c\/td\u003e\n\u003ctd\u003e5 years\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/table\u003e\n\n  \u003ch3\u003eApplications\u003c\/h3\u003e\n  \u003cp\u003eIdeal for \u003cstrong\u003eurinalysis, drug screening programs, clinical pathology labs, hospital wards, occupational health screening, and diagnostic point-of-care collection\u003c\/strong\u003e. Suitable for both human and veterinary specimen workflows.\u003c\/p\u003e\n\n  \u003ch3\u003eB2B Bulk Inquiry\u003c\/h3\u003e\n  \u003cp\u003e\u003cstrong\u003eFactory-direct pricing\u003c\/strong\u003e with graduated volume tiers starting at 500 cases. Private labeling, custom graduation ranges, and clean options are all available upon request. Contact our B2B team for a compliance package, SDS, and a competitive quote for your laboratory supply chain.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eRelated Reading\u003c\/h3\u003e\n\u003cp\u003eLearn more about choosing and using this product category:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/clinieco.ca\/blogs\/medical-supply-guide\/specimen-collection-choosing-the-right-leak-proof-sample-cups-for-canadian-labs\"\u003eSpecimen Collection: Choosing the Right Leak-Proof Sample Cups for Canadian Labs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/clinieco.ca\/blogs\/medical-supply-guide\/specimen-bag-types-leak-proof-standards-for-canadian-labs\"\u003eSpecimen Bag Types: Leak-Proof Standards for Canadian Labs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/clinieco.ca\/blogs\/medical-supply-guide\/specimen-bag-labeling-requirements-for-canadian-laboratories-phac-and-transport-canada-standards\"\u003eSpecimen Bag Labeling Requirements for Canadian Laboratories: PHAC and Transport Canada Standards\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- GEO-RELATED-READING --\u003e","brand":"CliniEco Medical","offers":[{"title":"6-Pack","offer_id":49081995231454,"sku":"CLI-SC-90ML-100-6PK","price":53.94,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/5741\/0526\/files\/clini_specimen-cups_7.jpg?v=1783020280"},{"product_id":"clinieco-medical-specimen-bags-6-9-inch-95kpa-certified-100-pack","title":"CliniEco Medical UN3373 Specimen Transport Bags — 6×9\", 95 kPa, Document Pouch \u0026 Absorbent Pad, 100-Pack","description":"\u003ch3\u003eThe standard specimen bag — the size most Canadian clinics actually use\u003c\/h3\u003e\n\u003cp\u003e6 × 9 inches (152 × 229 mm) is the workhorse size for routine specimen transport. Blood tubes, urine containers, swabs, histology pots — a standard specimen bag takes them without waste and without forcing you into an oversized bag for a small sample.\u003c\/p\u003e\n\u003cp\u003eIf you are setting up specimen transport for a clinic, a collection room, a nursing station or a pharmacy, this is almost always the size to start with.\u003c\/p\u003e\n\u003cp\u003eWhichever specimen collection workflow you run — venous blood, urine, swabs, tissue or cytology — the sample leaves the room in one of these bags, with the request form kept in the separate document pouch.\u003c\/p\u003e\n\u003ch3\u003eSpecifications you can hold us to\u003c\/h3\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e6 × 9 in (152 × 229 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003eThree-wall — specimen pouch, absorbent layer, outer wall with document pouch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e\u003cstrong\u003eAbsorbent layer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003eBuilt in, per P650 (7)(d)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e\u003cstrong\u003ePressure performance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e95 kPa, per P650 (7)(e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e\u003cstrong\u003eClosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003eZip-lock plus separate outer document compartment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e\u003cstrong\u003eMarking\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003eUN3373 and biohazard marking\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e\u003cstrong\u003ePack\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e100 per box · 10 boxes per case (1,000 bags)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e\u003cstrong\u003eImporter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003eCliniEco Medical — Health Canada MDEL #35334\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat the three-wall construction does for you\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003eInner pouch\u003c\/strong\u003e — holds the primary receptacle. Sealed separately from the outside world, so a leak never reaches the carrier.\u003c\/p\u003e\n\u003cp\u003e• \u003cstrong\u003eAbsorbent layer\u003c\/strong\u003e — sits between the inner pouch and the outer wall, where P650 (7)(d) requires it. Not taped on, not added by you, built in.\u003c\/p\u003e\n\u003cp\u003e• \u003cstrong\u003eOuter wall with document compartment\u003c\/strong\u003e — keeps the requisition and the specimen physically separate, which is both the P650 requirement and simple good practice. Samples turning up with a soaked requisition are a daily problem for laboratories.\u003c\/p\u003e\n\n\u003ch3\u003eWhat UN3373 and 95 kPa actually mean\u003c\/h3\u003e\n\u003cp\u003eThis is the part most listings get wrong, so here it is properly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUN3373 is a transport classification, not a product feature.\u003c\/strong\u003e It covers Category B biological substances — the human or animal specimens that move between a clinic, a laboratory and a referral lab every day. The packaging rules for Category B are set out in \u003cstrong\u003eADR P650\u003c\/strong\u003e (and IATA 650 for air), and they are what this bag is built for.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e95 kPa is a performance requirement, not a material.\u003c\/strong\u003e P650 (7)(e) says the primary receptacle or the secondary packaging must withstand, without leakage, an internal pressure of 95 kPa. That is a test the packaging has to pass. It does not tell you what the bag is made of, and a bag is not \"95 kPa\" the way it is \"polyethylene\". Any supplier who cannot explain that distinction is selling you a word, not a specification.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe absorbent pad is not a free upgrade — it is required.\u003c\/strong\u003e P650 (7)(d) requires absorbent material to be placed between the primary receptacle and the secondary packaging, sufficient to absorb the entire liquid content. That is why our bags have one built in. If you are buying a specimen bag without an absorbent layer, check what you are relying on for compliance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eP650 does not require a design-type approval or a certificate.\u003c\/strong\u003e The obligation sits with the shipper. A test report is commercial evidence and is genuinely useful, but a supplier claiming the regulation \"requires a certificate\" is mis-stating it.\u003c\/p\u003e\n\u003ch3\u003eWhat we can state plainly\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003eThe pressure test figure is 95 kPa, per P650 (7)(e).\u003c\/strong\u003e Named, and quotable.\u003c\/p\u003e\n\u003cp\u003e• \u003cstrong\u003eAn absorbent layer is built in, per P650 (7)(d).\u003c\/strong\u003e Not an optional extra.\u003c\/p\u003e\n\u003cp\u003e• \u003cstrong\u003eWe stock and ship from Toronto, Ontario.\u003c\/strong\u003e We are the importer of record: Ecology Source New Energy Technology Co., LTD. o\/a CliniEco Medical, Health Canada MDEL #35334.\u003c\/p\u003e\n\u003ch3\u003eThe documentation we hold — and how to check it\u003c\/h3\u003e\n\u003cp\u003eOur specimen bags are built to \u003cstrong\u003eADR \/ IATA P650\u003c\/strong\u003e, which is the rule set that governs Category B biological substances in transport. In practice that means two things are built in as standard: the \u003cstrong\u003eabsorbent material\u003c\/strong\u003e that P650 \u003cstrong\u003e(7)(d)\u003c\/strong\u003e requires between the primary receptacle and the secondary packaging, and a construction that meets the \u003cstrong\u003e95 kPa\u003c\/strong\u003e internal pressure performance requirement in \u003cstrong\u003eP650 (7)(e)\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest documentation is held per size.\u003c\/strong\u003e P650 itself does not require a design-type approval or a certificate, and any supplier who tells you it does is mis-stating the regulation. Reports are commercial evidence, and they are genuinely useful when you need to satisfy a laboratory or an auditor. So: \u003cstrong\u003eask us which sizes we hold test reports for, and we will tell you exactly what we have before you order.\u003c\/strong\u003e We would rather you ask a direct question and get a direct answer than buy on the strength of a word.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat matters more, and is often missed:\u003c\/strong\u003e the report has to identify the item it tested. ISO\/IEC 17025 §7.8 requires a test report to uniquely identify the sample tested. A report that names a model number but not a size does not demonstrate performance for a size you are buying. If you are relying on a report for an audit, check that it names the size on the face of the document.\u003c\/p\u003e\n\n\u003cp\u003e• \u003cstrong\u003eIf a different size suits your specimens better, we will say so\u003c\/strong\u003e — including pointing you to a larger bag if that is the honest answer.\u003c\/p\u003e\n\u003ch3\u003eWhy buy specimen transport bags from us rather than a general supplier\u003c\/h3\u003e\n\u003cp\u003eTransport packaging is a compliance question, not a stationery question. A clinic that gets it wrong is the one that carries the exposure, and the laboratory receiving a leaking or non-conforming sample is entitled to reject it and ask for a repeat. We sell this line because we can explain the rules, name the clause, explain what a test report does and does not prove, and tell you what to write on the paperwork. Most sellers of \"95 kPa bags\" cannot do any of those four things.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOrdering.\u003c\/strong\u003e Ships from Toronto. Tell us your specimen volumes and route, and we will confirm the right size and pack in writing before you commit.\u003c\/p\u003e\n","brand":"CliniEco Medical","offers":[{"title":"Single Box","offer_id":48503717757150,"sku":"CLI-BAG-UN3373-100","price":99.0,"currency_code":"CAD","in_stock":true},{"title":"Bulk 10-Box","offer_id":48595342393566,"sku":"CLI-BAG-UN3373-1000","price":792.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/5741\/0526\/files\/b8291647db92735c833260e2648ecdb7.jpg?v=1789992799"},{"product_id":"clinieco-medical-specimen-transport-bags-6x9-3-wall-100-pack","title":"CliniEco Medical Specimen Transport Bags — 6×9\", 3-Wall Leak-Resistant, Document Pouch \u0026 Absorbent Pad, 1,000 Bags (10-Box Case)","description":"\u003ch2\u003e3-Wall Specimen Transport Bags\u003c\/h2\u003e\n\u003cp\u003eEveryday specimen transport for clinics, walk-in practices, long-term care and home care. A three-wall leak-resistant bag with an outer document pouch and an internal absorbent pad — practical protection for urine, stool and sputum samples moved by ground between collection sites and the lab.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-wall leak-resistant construction\u003c\/strong\u003e — inner absorbent layer, main bag, outer layer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter document pouch\u003c\/strong\u003e — requisition stays outside the biohazard bag, readable without opening it\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in absorbent pad\u003c\/strong\u003e (approx. 3 × 5 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress-to-close seal\u003c\/strong\u003e with write-on zone and barcode area\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 6 in × 9 in (150 × 240 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIntended use\u003c\/h3\u003e\n\u003cp\u003eIntended for routine ground transport of clinical specimens in clinics, walk-in practices, long-term care and home care. Not pressure-tested for air transport — if your samples travel by air, use our \u003ca href=\"\/fr\/products\/clinieco-medical-specimen-bags-6-9-inch-95kpa-certified-100-pack\"\u003eUN3373 95 kPa Specimen Transport Bags\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003ePacking\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e100 bags per pack · 10 packs per case (1,000 bags)\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eCliniEco Medical — Toronto. Distributed under MDEL #35334.\u003c\/em\u003e\u003c\/p\u003e","brand":"CliniEco Medical","offers":[{"title":"Bulk 10-Box","offer_id":49035569397982,"sku":"CLI-BAG-3W-1000","price":127.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/5741\/0526\/files\/clinieco-3wall-specimen-bag.jpg?v=1789173921"},{"product_id":"specimen-container-120ml-sterile-screw-cap-100-pack","title":"Specimen Container 120 mL — 200 Containers (2 × 100-Pack Case)","description":"\u003cp\u003eA 120 mL sterile specimen container with a screw cap, sold 100 per pack. The graduated side wall makes fill volume readable at a glance, and the threaded cap seals the sample for transport on the same day it is collected.\u003c\/p\u003e\n\u003cp\u003eThese containers suit urine, stool, sputum and general sample collection where the container must arrive at the bench leak-free and clearly labelled. The 120 mL body is the size most clinics keep for urine work: a urine collection container that takes a midstream sample for clean catch urine specimen protocols, with a graduated wall so the fill volume is readable and a screw cap that seals the container for transport. They are single use: no washing, no re-labelling, no cross-contamination between patients.\u003c\/p\u003e\n\u003ch2\u003eWho it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCommunity and hospital laboratories receiving transported samples\u003c\/li\u003e\n\u003cli\u003eFood, water and environmental testing labs that collect their own samples\u003c\/li\u003e\n\u003cli\u003eDental, medical and veterinary clinics that send specimens out\u003c\/li\u003e\n\u003cli\u003eLong-term care and home care teams collecting samples on site\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVolume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e120 mL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCap\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eScrew cap, threaded, leak-resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eGraduations\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMoulded side-wall graduations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMedical-grade polypropylene\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSterility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSterile, individually bagged where specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFormat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSingle use, 100 per pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIntended use\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSample collection and transport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eOrdering and compliance notes\u003c\/h2\u003e\n\u003cp\u003eFits standard specimen transport bags and rack systems. Pair with our 95 kPa specimen transport bags where your courier or lab requires secondary containment.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is a 120 mL specimen container used for?\u003c\/h3\u003e\n\u003cp\u003eIt is used to collect and transport a single patient or sample volume — most often urine, stool, sputum or environmental samples — so that the sample arrives at the bench intact and identifiable.\u003c\/p\u003e\n\u003ch3\u003eAre these containers sterile?\u003c\/h3\u003e\n\u003cp\u003eYes. The listed pack is supplied sterile. Confirm sterility format (bulk bagged vs individually bagged) when you order if your SOP specifies one.\u003c\/p\u003e\n\u003ch3\u003eDo they leak in transport?\u003c\/h3\u003e\n\u003cp\u003eA threaded screw cap with a full turn seal is the standard defence against leakage. Fit the cap firmly, place the container inside a secondary transport bag, and keep the request form outside the bag.\u003c\/p\u003e\n\u003ch3\u003eCan I order these on a standing order?\u003c\/h3\u003e\n\u003cp\u003eYes. Volume pricing, scheduled deliveries and purchase-order terms are available through our B2B quote process.\u003c\/p\u003e\n\u003ch2\u003eRelated reading\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/fr\/products\/clinieco-medical-specimen-bags-6-9-inch-95kpa-certified-100-pack\"\u003e95 kPa specimen transport bags\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/fr\/blogs\/medical-supply-guide\/food-testing-labs-in-canada-specimen-bag-and-sampling-guide\"\u003eFood testing labs in Canada: specimen bag and sampling guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/fr\/blogs\/medical-supply-guide\/a-vancouver-labs-specimen-rejection-rate-turnaround-case-review\"\u003eA Vancouver lab's specimen rejection rate: case review\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBuying for a clinic, lab or care home?\u003c\/strong\u003e Order the case size online, or request a B2B quote for volume pricing, standing orders and purchase-order terms at \u003ca href=\"\/fr\/pages\/wholesale\"\u003eCliniEco bulk quote\u003c\/a\u003e.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is a 120 mL specimen container used for?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It is used to collect and transport a single patient or sample volume — most often urine, stool, sputum or environmental samples — so that the sample arrives at the bench intact and identifiable.\"}},{\"@type\":\"Question\",\"name\":\"Are these containers sterile?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. The listed pack is supplied sterile. Confirm sterility format (bulk bagged vs individually bagged) when you order if your SOP specifies one.\"}},{\"@type\":\"Question\",\"name\":\"Do they leak in transport?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A threaded screw cap with a full turn seal is the standard defence against leakage. Fit the cap firmly, place the container inside a secondary transport bag, and keep the request form outside the bag.\"}},{\"@type\":\"Question\",\"name\":\"Can I order these on a standing order?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. Volume pricing, scheduled deliveries and purchase-order terms are available through our B2B quote process.\"}}]}\u003c\/script\u003e","brand":"CliniEco Medical","offers":[{"title":"2-Pack","offer_id":49081998016734,"sku":"CLI-SPEC-120-2PK","price":59.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/5741\/0526\/files\/specimen-container-120ml-sterile-screw-cap-100-pack.png?v=1789817751"},{"product_id":"petri-dish-100x15mm-sterile-polystyrene-500-case","title":"Sterile Petri Dish 100 × 15 mm — Polystyrene, 500\/Case","description":"\u003cp\u003eStandard 100 x 15 mm petri dishes in optically clear polystyrene, supplied sterile in cases of 500. The shallow profile and uniform wall thickness make colony counting and plate photography repeatable between operators.\u003c\/p\u003e\n\u003cp\u003eSold as empty, sterile dishes — agar and media are not included. That keeps the plate suitable for whichever prepared medium your lab already validates, and avoids the shipment and shelf-life problems that come with pre-poured plates.\u003c\/p\u003e\n\u003ch2\u003eWho it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFood and beverage plant microbiology labs running routine plate counts\u003c\/li\u003e\n\u003cli\u003eEnvironmental and water testing laboratories\u003c\/li\u003e\n\u003cli\u003eSchool, college and university teaching labs\u003c\/li\u003e\n\u003cli\u003eCompounding pharmacies and clinics performing sterility checks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100 mm diameter x 15 mm height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePolystyrene, optically clear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVentilation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eVented lid for gas exchange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSterility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSterile, single use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStacking\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStackable, uniform rim\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFormat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e500 dishes per case\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIntended use\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMicrobiological culture work\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eOrdering and compliance notes\u003c\/h2\u003e\n\u003cp\u003ePair with inoculating loops, spreaders and colony counters for a complete bench set-up. If your workflow uses pre-poured or pre-prepared plates with agar, that is a separate product family with its own supply and regulatory treatment.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat size is a standard petri dish?\u003c\/h3\u003e\n\u003cp\u003e100 x 15 mm is the standard general-purpose size for plate counts and streak plates. Smaller 60 mm and 90 mm formats exist for specific methods; match whatever your validated procedure names.\u003c\/p\u003e\n\u003ch3\u003eAre these dishes sterile?\u003c\/h3\u003e\n\u003cp\u003eYes, the case is supplied sterile and single use. Keep the sleeve closed until the plate is needed and discard after use.\u003c\/p\u003e\n\u003ch3\u003eCan I autoclave polystyrene dishes?\u003c\/h3\u003e\n\u003cp\u003eNo. Polystyrene is a single-use plastic and will deform in an autoclave. Sterile dishes are used once; glass dishes are the reusable alternative for heat-based workflows.\u003c\/p\u003e\n\u003ch3\u003eDo you sell pre-poured agar plates?\u003c\/h3\u003e\n\u003cp\u003eNot currently. Our listing is for empty sterile dishes, which lets each lab use the medium it has already validated.\u003c\/p\u003e\n\u003ch2\u003eRelated reading\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/fr\/blogs\/medical-supply-guide\/food-plant-microbiology-lab-starter-supply-checklist\"\u003eFood plant microbiology lab: starter supply checklist\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/fr\/blogs\/medical-supply-guide\/usp-71-sterility-testing-explained-what-pharmacies-and-compounding-labs-need-to-know\"\u003eUSP 71 sterility testing explained\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/fr\/blogs\/medical-supply-guide\/your-food-plants-microbiology-lab-sampling-sterilization-verification-and-record-keeping\"\u003eMicrobiology lab: sampling, verification and record-keeping\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBuying for a clinic, lab or care home?\u003c\/strong\u003e Order the case size online, or request a B2B quote for volume pricing, standing orders and purchase-order terms at \u003ca href=\"\/fr\/pages\/wholesale\"\u003eCliniEco bulk quote\u003c\/a\u003e.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What size is a standard petri dish?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"100 x 15 mm is the standard general-purpose size for plate counts and streak plates. Smaller 60 mm and 90 mm formats exist for specific methods; match whatever your validated procedure names.\"}},{\"@type\":\"Question\",\"name\":\"Are these dishes sterile?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, the case is supplied sterile and single use. Keep the sleeve closed until the plate is needed and discard after use.\"}},{\"@type\":\"Question\",\"name\":\"Can I autoclave polystyrene dishes?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No. Polystyrene is a single-use plastic and will deform in an autoclave. Sterile dishes are used once; glass dishes are the reusable alternative for heat-based workflows.\"}},{\"@type\":\"Question\",\"name\":\"Do you sell pre-poured agar plates?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Not currently. Our listing is for empty sterile dishes, which lets each lab use the medium it has already validated.\"}}]}\u003c\/script\u003e","brand":"CliniEco Medical","offers":[{"title":"Default Title","offer_id":49039185969374,"sku":"CLI-PETRI-100","price":159.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/5741\/0526\/files\/petri-dish-100x15mm-sterile-polystyrene-500-case-1.jpg?v=1789404321"},{"product_id":"clinieco-medical-specimen-bags-8-10-inch-95kpa-certified-100-pack","title":"CliniEco Medical UN3373 Specimen Transport Bags — 8×10\", 95 kPa, Document Pouch \u0026 Absorbent Pad, 100-Pack","description":"\u003ch3\u003eThe larger bag, for when a 6 × 9 is too tight\u003c\/h3\u003e\n\u003cp\u003e8 × 10 inches (203 × 254 mm) is the second size you should keep on the shelf. It exists for the load that does not fit a standard bag: multiple blood tubes for one patient, larger urine or sputum containers, tissue pots, and anything that would otherwise be forced into a bag with no room left for the absorbent layer to do its job.\u003c\/p\u003e\n\u003cp\u003eAn over-filled bag is a compliance problem, not just an inconvenience — if the inner pouch is stretched against the outer wall, there is no absorbent capacity left to absorb a leak.\u003c\/p\u003e\n\u003cp\u003eWhichever specimen collection workflow you run — venous blood, urine, swabs, tissue or cytology — the sample leaves the room in one of these bags, with the request form kept in the separate document pouch.\u003c\/p\u003e\n\u003ch3\u003eSpecifications you can hold us to\u003c\/h3\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e8 × 10 in (203 × 254 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003eThree-wall — specimen pouch, absorbent layer, outer wall with document pouch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e\u003cstrong\u003eAbsorbent layer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003eBuilt in, per P650 (7)(d)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e\u003cstrong\u003ePressure performance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e95 kPa, per P650 (7)(e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e\u003cstrong\u003eMarking\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003eUN3373 and biohazard marking\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e\u003cstrong\u003ePack\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e100 per box · 10 boxes per case (1,000 bags)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e\u003cstrong\u003eImporter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003eCliniEco Medical — Health Canada MDEL #35334\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhen to choose 8 × 10 rather than 6 × 9\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003eMore than two or three tubes from one patient\u003c\/strong\u003e travelling together.\u003c\/p\u003e\n\u003cp\u003e• \u003cstrong\u003eLarger container formats\u003c\/strong\u003e — wide-mouth urine pots, sputum containers, some stool kits.\u003c\/p\u003e\n\u003cp\u003e• \u003cstrong\u003eTissue and histology specimens\u003c\/strong\u003e that come in their own pot and need clearance around them.\u003c\/p\u003e\n\u003cp\u003e• \u003cstrong\u003eAny load where you are currently folding or forcing\u003c\/strong\u003e a specimen into a bag. That is the signal that you need this size. Folding a bag also folds the absorbent layer, and folded absorbent does not absorb.\u003c\/p\u003e\n\n\u003ch3\u003eWhat UN3373 and 95 kPa actually mean\u003c\/h3\u003e\n\u003cp\u003eThis is the part most listings get wrong, so here it is properly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUN3373 is a transport classification, not a product feature.\u003c\/strong\u003e It covers Category B biological substances — the human or animal specimens that move between a clinic, a laboratory and a referral lab every day. The packaging rules for Category B are set out in \u003cstrong\u003eADR P650\u003c\/strong\u003e (and IATA 650 for air), and they are what this bag is built for.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e95 kPa is a performance requirement, not a material.\u003c\/strong\u003e P650 (7)(e) says the primary receptacle or the secondary packaging must withstand, without leakage, an internal pressure of 95 kPa. That is a test the packaging has to pass. It does not tell you what the bag is made of, and a bag is not \"95 kPa\" the way it is \"polyethylene\". Any supplier who cannot explain that distinction is selling you a word, not a specification.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe absorbent pad is not a free upgrade — it is required.\u003c\/strong\u003e P650 (7)(d) requires absorbent material to be placed between the primary receptacle and the secondary packaging, sufficient to absorb the entire liquid content. That is why our bags have one built in. If you are buying a specimen bag without an absorbent layer, check what you are relying on for compliance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eP650 does not require a design-type approval or a certificate.\u003c\/strong\u003e The obligation sits with the shipper. A test report is commercial evidence and is genuinely useful, but a supplier claiming the regulation \"requires a certificate\" is mis-stating it.\u003c\/p\u003e\n\u003ch3\u003eWhat we can state plainly\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003eThe pressure test figure is 95 kPa, per P650 (7)(e).\u003c\/strong\u003e Named, and quotable.\u003c\/p\u003e\n\u003cp\u003e• \u003cstrong\u003eAn absorbent layer is built in, per P650 (7)(d).\u003c\/strong\u003e Not an optional extra.\u003c\/p\u003e\n\u003cp\u003e• \u003cstrong\u003eWe stock and ship from Toronto, Ontario.\u003c\/strong\u003e We are the importer of record: Ecology Source New Energy Technology Co., LTD. o\/a CliniEco Medical, Health Canada MDEL #35334.\u003c\/p\u003e\n\u003ch3\u003eThe documentation we hold — and how to check it\u003c\/h3\u003e\n\u003cp\u003eOur specimen bags are built to \u003cstrong\u003eADR \/ IATA P650\u003c\/strong\u003e, which is the rule set that governs Category B biological substances in transport. In practice that means two things are built in as standard: the \u003cstrong\u003eabsorbent material\u003c\/strong\u003e that P650 \u003cstrong\u003e(7)(d)\u003c\/strong\u003e requires between the primary receptacle and the secondary packaging, and a construction that meets the \u003cstrong\u003e95 kPa\u003c\/strong\u003e internal pressure performance requirement in \u003cstrong\u003eP650 (7)(e)\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest documentation is held per size.\u003c\/strong\u003e P650 itself does not require a design-type approval or a certificate, and any supplier who tells you it does is mis-stating the regulation. Reports are commercial evidence, and they are genuinely useful when you need to satisfy a laboratory or an auditor. So: \u003cstrong\u003eask us which sizes we hold test reports for, and we will tell you exactly what we have before you order.\u003c\/strong\u003e We would rather you ask a direct question and get a direct answer than buy on the strength of a word.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat matters more, and is often missed:\u003c\/strong\u003e the report has to identify the item it tested. ISO\/IEC 17025 §7.8 requires a test report to uniquely identify the sample tested. A report that names a model number but not a size does not demonstrate performance for a size you are buying. If you are relying on a report for an audit, check that it names the size on the face of the document.\u003c\/p\u003e\n\n\u003cp\u003e• \u003cstrong\u003eIf a different size suits your specimens better, we will say so\u003c\/strong\u003e — including pointing you to a larger bag if that is the honest answer.\u003c\/p\u003e\n\u003ch3\u003eWhy buy specimen transport bags from us rather than a general supplier\u003c\/h3\u003e\n\u003cp\u003eTransport packaging is a compliance question, not a stationery question. A clinic that gets it wrong is the one that carries the exposure, and the laboratory receiving a leaking or non-conforming sample is entitled to reject it and ask for a repeat. We sell this line because we can explain the rules, name the clause, explain what a test report does and does not prove, and tell you what to write on the paperwork. Most sellers of \"95 kPa bags\" cannot do any of those four things.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOrdering.\u003c\/strong\u003e Ships from Toronto. Tell us your specimen volumes and route, and we will confirm the right size and pack in writing before you commit.\u003c\/p\u003e\n","brand":"CliniEco Medical","offers":[{"title":"Single Box","offer_id":49082380386526,"sku":"CLI-BAG-UN3373-8X10-100","price":349.0,"currency_code":"CAD","in_stock":true},{"title":"Bulk 10-Box","offer_id":49082380452062,"sku":"CLI-BAG-UN3373-8X10-1000","price":1990.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/5741\/0526\/files\/CLI-BAG-UN3373-8X10-100-01_photo-main.png?v=1790491680"},{"product_id":"clinieco-medical-specimen-bags-12-15-inch-95kpa-certified-100-pack","title":"CliniEco Medical UN3373 Specimen Transport Bags — 12×15\", 95 kPa, Document Pouch \u0026 Absorbent Pad, 100-Pack","description":"\u003ch3\u003eThe size for large specimens — pathology, surgical and anatomical\u003c\/h3\u003e\n\u003cp\u003e12 × 15 inches exists for the sample that simply is not going to fit anywhere else: whole organs and large tissue sections from surgery, anatomical pathology specimens, and large-volume collections. These are usually transferred from a hospital or surgical suite to a pathology laboratory, and the transport packaging rules do not stop applying because the specimen is large. If anything, the exposure is greater.\u003c\/p\u003e\n\u003cp\u003eThis is not a high-volume item for most clinics. It is the size you buy when your lab asks for it, and it is worth having the right thing rather than improvising with a bag that is not designed for the volume.\u003c\/p\u003e\n\u003cp\u003eWhichever specimen collection workflow you run — venous blood, urine, swabs, tissue or cytology — the sample leaves the room in one of these bags, with the request form kept in the separate document pouch.\u003c\/p\u003e\n\u003ch3\u003eSpecifications you can hold us to\u003c\/h3\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e12 × 15 in (305 × 381 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003eThree-wall — specimen pouch, absorbent layer, outer wall with document pouch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e\u003cstrong\u003eAbsorbent layer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003eBuilt in, per P650 (7)(d)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e\u003cstrong\u003ePressure performance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e95 kPa, per P650 (7)(e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e\u003cstrong\u003eMarking\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003eUN3373 and biohazard marking\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e\u003cstrong\u003ePack\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e100 per box · 10 boxes per case (1,000 bags)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e\u003cstrong\u003eImporter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003eCliniEco Medical — Health Canada MDEL #35334\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat to check before you commit to the largest size\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003eAbsorbent capacity scales with the specimen, not with the bag.\u003c\/strong\u003e A large specimen needs a correspondingly greater absorbent volume. Tell us the specimen type and volume and we will confirm whether this size carries enough absorbent for your case rather than assume it does.\u003c\/p\u003e\n\u003cp\u003e• \u003cstrong\u003eWeight.\u003c\/strong\u003e A large liquid-filled specimen is heavy, and the outer wall is what carries it. Tell us the weight and we will advise on the right construction.\u003c\/p\u003e\n\u003cp\u003e• \u003cstrong\u003eYours may be a two-bag problem.\u003c\/strong\u003e Some pathology workflows place the specimen container inside this bag and then into a rigid outer box. If that is your process, say so — we will quote the bag and tell you what else the route requires.\u003c\/p\u003e\n\n\u003ch3\u003eWhat UN3373 and 95 kPa actually mean\u003c\/h3\u003e\n\u003cp\u003eThis is the part most listings get wrong, so here it is properly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUN3373 is a transport classification, not a product feature.\u003c\/strong\u003e It covers Category B biological substances — the human or animal specimens that move between a clinic, a laboratory and a referral lab every day. The packaging rules for Category B are set out in \u003cstrong\u003eADR P650\u003c\/strong\u003e (and IATA 650 for air), and they are what this bag is built for.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e95 kPa is a performance requirement, not a material.\u003c\/strong\u003e P650 (7)(e) says the primary receptacle or the secondary packaging must withstand, without leakage, an internal pressure of 95 kPa. That is a test the packaging has to pass. It does not tell you what the bag is made of, and a bag is not \"95 kPa\" the way it is \"polyethylene\". Any supplier who cannot explain that distinction is selling you a word, not a specification.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe absorbent pad is not a free upgrade — it is required.\u003c\/strong\u003e P650 (7)(d) requires absorbent material to be placed between the primary receptacle and the secondary packaging, sufficient to absorb the entire liquid content. That is why our bags have one built in. If you are buying a specimen bag without an absorbent layer, check what you are relying on for compliance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eP650 does not require a design-type approval or a certificate.\u003c\/strong\u003e The obligation sits with the shipper. A test report is commercial evidence and is genuinely useful, but a supplier claiming the regulation \"requires a certificate\" is mis-stating it.\u003c\/p\u003e\n\u003ch3\u003eWhat we can state plainly\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003eThe pressure test figure is 95 kPa, per P650 (7)(e).\u003c\/strong\u003e Named, and quotable.\u003c\/p\u003e\n\u003cp\u003e• \u003cstrong\u003eAn absorbent layer is built in, per P650 (7)(d).\u003c\/strong\u003e Not an optional extra.\u003c\/p\u003e\n\u003cp\u003e• \u003cstrong\u003eWe stock and ship from Toronto, Ontario.\u003c\/strong\u003e We are the importer of record: Ecology Source New Energy Technology Co., LTD. o\/a CliniEco Medical, Health Canada MDEL #35334.\u003c\/p\u003e\n\u003ch3\u003eThe documentation we hold — and how to check it\u003c\/h3\u003e\n\u003cp\u003eOur specimen bags are built to \u003cstrong\u003eADR \/ IATA P650\u003c\/strong\u003e, which is the rule set that governs Category B biological substances in transport. In practice that means two things are built in as standard: the \u003cstrong\u003eabsorbent material\u003c\/strong\u003e that P650 \u003cstrong\u003e(7)(d)\u003c\/strong\u003e requires between the primary receptacle and the secondary packaging, and a construction that meets the \u003cstrong\u003e95 kPa\u003c\/strong\u003e internal pressure performance requirement in \u003cstrong\u003eP650 (7)(e)\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest documentation is held per size.\u003c\/strong\u003e P650 itself does not require a design-type approval or a certificate, and any supplier who tells you it does is mis-stating the regulation. Reports are commercial evidence, and they are genuinely useful when you need to satisfy a laboratory or an auditor. So: \u003cstrong\u003eask us which sizes we hold test reports for, and we will tell you exactly what we have before you order.\u003c\/strong\u003e We would rather you ask a direct question and get a direct answer than buy on the strength of a word.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat matters more, and is often missed:\u003c\/strong\u003e the report has to identify the item it tested. ISO\/IEC 17025 §7.8 requires a test report to uniquely identify the sample tested. A report that names a model number but not a size does not demonstrate performance for a size you are buying. If you are relying on a report for an audit, check that it names the size on the face of the document.\u003c\/p\u003e\n\n\u003cp\u003e• \u003cstrong\u003eIf a different size suits your specimens better, we will say so\u003c\/strong\u003e — including pointing you to a larger bag if that is the honest answer.\u003c\/p\u003e\n\u003ch3\u003eWhy buy specimen transport bags from us rather than a general supplier\u003c\/h3\u003e\n\u003cp\u003eTransport packaging is a compliance question, not a stationery question. A clinic that gets it wrong is the one that carries the exposure, and the laboratory receiving a leaking or non-conforming sample is entitled to reject it and ask for a repeat. We sell this line because we can explain the rules, name the clause, explain what a test report does and does not prove, and tell you what to write on the paperwork. Most sellers of \"95 kPa bags\" cannot do any of those four things.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOrdering.\u003c\/strong\u003e Ships from Toronto. Tell us your specimen volumes and route, and we will confirm the right size and pack in writing before you commit.\u003c\/p\u003e\n","brand":"CliniEco Medical","offers":[{"title":"Single Box","offer_id":49082380419294,"sku":"CLI-BAG-UN3373-12X15-100","price":549.0,"currency_code":"CAD","in_stock":true},{"title":"Bulk 10-Box","offer_id":49082380484830,"sku":"CLI-BAG-UN3373-12X15-1000","price":3190.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/5741\/0526\/files\/CLI-BAG-UN3373-12X15-100-01_photo-main.png?v=1790491694"}],"url":"https:\/\/clinieco.ca\/fr\/collections\/laboratory-consumables.oembed","provider":"CliniEco Medical","version":"1.0","type":"link"}