{"product_id":"insulin-pen-needles-32g-4mm-100-box","title":"Insulin Pen Needles 32G × 4 mm — 100\/Box","description":"\u003cp\u003eInsulin pen needles measuring 32G with a 4 mm length, supplied 100 per box. 4 mm is the shortest commonly used pen needle length and is appropriate for most adults regardless of body size, provided injection technique lifts the skin appropriately.\u003c\/p\u003e\n\u003cp\u003eThis page documents the specification for organisations that standardise pen needles as part of an insulin supply list — clinics, care homes and diabetes education programs.\u003c\/p\u003e\n\u003ch2\u003eWhat does 32G × 4 mm actually specify?\u003c\/h2\u003e\n\u003cp\u003eGauge describes the outside diameter of the cannula, not its bore. 32G sits at 0.23 mm nominal outside diameter in the ISO 9626:2016 gauge series, which runs from 0.18 mm (34G) to 3.4 mm (10G). Wall thickness decides the inner diameter, so two needles both marked 32G can differ in flow and in the force needed to deliver a dose; thin-wall and extra-thin-wall variants are not the same product. Length is measured from the hub shoulder to the tip, and 4 mm is the short end of the adult range. Four millimetres reaches subcutaneous fat in most adults, including adults with a higher body mass index, which is why guidance moved away from 8 mm and 12 mm as default lengths. It is not universal: very young children, very lean adults and anyone injecting into a lifted skin fold need a clinical decision, and the injection technique (straight in at 90 degrees with or without a lift) belongs in the written protocol next to the product code.\u003c\/p\u003e\n\u003ch2\u003eWhich standard should the supplier's test report cite?\u003c\/h2\u003e\n\u003cp\u003eDouble-ended pen needles are covered by ISO 11608-2:2022, third edition, which refers to ISO 11608-1 for dose accuracy and functional compatibility and adapts the needle requirements of ISO 7864:2016; the tubing dimensions come from ISO 9626:2016. Sterility and the sterile barrier are separate questions: ask whether the process is validated to ISO 11135:2014 for ethylene oxide or to the ISO 11137 series for radiation, and whether the packaging system is qualified to ISO 11607-1:2019. A manufacturer working to ISO 13485:2016 can produce those reports on request. Distributors in Canada hold a Medical Device Establishment Licence; CliniEco Medical operates under MDEL #35334. A specification sheet that cites the standard and the edition answers most of a procurement review before it starts.\u003c\/p\u003e\n\u003ch2\u003eHow much insulin is left in the needle, and why does priming matter?\u003c\/h2\u003e\n\u003cp\u003eEvery pen needle has dead space between the cartridge septum and the needle tip. The manufacturer's priming step, commonly two units, fills that space so the dose dialled is the dose delivered. Skipping the prime under-delivers the first dose from a new needle; priming more than the instruction wastes insulin across a box of 100 and, in a facility, across a year. Write the priming volume into the protocol beside the product code, because it depends on the pen and needle combination rather than on the patient. Dose accuracy itself is what ISO 11608-1 is testing, and it is measured on the complete system, not on the needle alone.\u003c\/p\u003e\n\u003ch2\u003eWhat belongs in a care-home or clinic pen-needle standard?\u003c\/h2\u003e\n\u003cp\u003eOne gauge and length per pen model; compatibility verified against the pen manufacturer's own instructions rather than a generic fits-most-pens claim; single use with no recapping by hand; a sharps container within reach at every injection point; and a documented needlestick procedure. In Ontario, used needles are biomedical waste and are segregated into puncture-resistant sharps containers under Guideline C-4, The Management of Biomedical Waste in Ontario, which is the provincial document for that jurisdiction. Other provinces publish their own rules, so a policy written for sites in more than one province has to name the jurisdiction rather than treat the rule as national. Add the paper trail: lot number recorded at receipt, storage away from heat and light, and a par level that covers each pen station.\u003c\/p\u003e\n\u003ch2\u003eWhat should a buyer compare between two 32G × 4 mm boxes?\u003c\/h2\u003e\n\u003cp\u003eFive things change clinical performance, and two boxes with identical gauge and length can differ on all five: nominal outside diameter together with wall type, the pen models the hub has been validated for, the sterilisation method, the shelf life claimed for the sterile barrier, and the documentation package. Sourcing at volume is where those differences disappear into a spreadsheet, so keep a specification sheet per product code and attach the supplier's declaration to it. Our \u003ca href=\"\/en-us\/products\/clinieco-blood-glucose-monitor-kit-complete-diabetes-testing-kit-with-50-test-strips\"\u003eblood glucose monitoring kit\u003c\/a\u003e and \u003ca href=\"\/en-us\/products\/sterile-blood-lancets-33g-100-box\"\u003e33G blood lancets\u003c\/a\u003e follow the same documentation approach for the rest of a diabetes supply list, and the \u003ca href=\"\/en-us\/products\/sharps-container-1-quart-20-case\"\u003e1-quart sharps container\u003c\/a\u003e closes the disposal loop. Volume requirements are handled through the \u003ca href=\"\/en-us\/pages\/wholesale\"\u003ewholesale enquiry desk\u003c\/a\u003e.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ccaption\u003eInsulin pen needle 32G × 4 mm: specification and verification\u003c\/caption\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eAs listed on this page\u003c\/th\u003e\n\u003cth\u003eWhat to verify on the batch record\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eGauge\u003c\/td\u003e\n\u003ctd\u003e32G, 0.23 mm nominal outside diameter under ISO 9626:2016\u003c\/td\u003e\n\u003ctd\u003eLot certificate stating the tube dimension\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e4 mm\u003c\/td\u003e\n\u003ctd\u003eLabel and hub drawing agree with the requisition code\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWall\u003c\/td\u003e\n\u003ctd\u003eNot stated on this page\u003c\/td\u003e\n\u003ctd\u003eRegular, thin or extra-thin wall, and the flow this gives\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHub compatibility\u003c\/td\u003e\n\u003ctd\u003eStandard insulin pen platforms, verified per pen model\u003c\/td\u003e\n\u003ctd\u003eList of pen models the manufacturer tested\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDose accuracy basis\u003c\/td\u003e\n\u003ctd\u003eNot stated on this page\u003c\/td\u003e\n\u003ctd\u003eTest report citing ISO 11608-1 and ISO 11608-2:2022\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSterilisation\u003c\/td\u003e\n\u003ctd\u003eNot stated on this page\u003c\/td\u003e\n\u003ctd\u003eISO 11135:2014 for ethylene oxide, or the ISO 11137 series for radiation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSterile barrier\u003c\/td\u003e\n\u003ctd\u003eNot stated on this page\u003c\/td\u003e\n\u003ctd\u003ePackaging qualified to ISO 11607-1:2019, with shelf life\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuality system\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003eISO 13485:2016 certificate held by the manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDistribution\u003c\/td\u003e\n\u003ctd\u003eCliniEco Medical, MDEL #35334\u003c\/td\u003e\n\u003ctd\u003eLicence number on the supplier record\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eCliniEco Medical distributes diabetes and injection consumables in Canada under MDEL #35334. This page is a specification reference for organisations building an insulin supply list.\u003c\/p\u003e\n\u003ch2\u003eWho it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLong-term care homes standardising insulin pen supplies\u003c\/li\u003e\n\u003cli\u003eDiabetes education programs and outpatient clinics\u003c\/li\u003e\n\u003cli\u003eCommunity pharmacies with injection support services\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eGauge\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e32G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFormat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100 per box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard insulin pen platforms (verify per pen model)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStatus\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSpecification listing — availability pending supplier documentation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhy do pen needle lengths come in 4, 5, 6, 8 and 12 mm?\u003c\/h3\u003e\n\u003cp\u003eLength is chosen to reach subcutaneous tissue reliably without reaching muscle. Short 4 mm needles have largely replaced longer lengths for adults because they reduce the risk of intramuscular injection.\u003c\/p\u003e\n\u003ch3\u003eShould a pen needle be reused?\u003c\/h3\u003e\n\u003cp\u003eNo. Reusing a pen needle blunts the point, increases pain and can affect dose delivery. Facilities usually issue needles per injection and drop each one into a sharps container.\u003c\/p\u003e\n\u003ch3\u003eDo pen needles fit every insulin pen?\u003c\/h3\u003e\n\u003cp\u003ePen needle platforms differ. Verify compatibility against the specific pen model you stock before setting a standard.\u003c\/p\u003e\n\u003ch3\u003eHow do I ask about volume supply?\u003c\/h3\u003e\n\u003cp\u003eSend your requirement through our B2B enquiry form.\u003c\/p\u003e\n\u003ch2\u003eRelated reading\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-us\/blogs\/medical-supply-guide\/diabetes-management-supplies-canadian-patients-glucometers-test-strips\"\u003eDiabetes management supplies: glucometers, strips and lancets\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-us\/blogs\/medical-supply-guide\/medical-device-licensing-in-canada-class-i-vs-class-ii-vs-class-iv-explained\"\u003eMedical device classes in Canada explained\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-us\/blogs\/medical-supply-guide\/university-teaching-lab-supplies-ppe-and-specimen-essentials\"\u003eClinic and teaching program supply essentials\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eListing note:\u003c\/em\u003e this page is published ahead of full catalogue onboarding so that specifications, documentation and sourcing details are available in one place. Pricing and ordering will be enabled once supplier documentation is complete. To be notified or to discuss volume requirements, use our \u003ca href=\"\/en-us\/pages\/wholesale\"\u003eB2B enquiry form\u003c\/a\u003e.\u003c\/p\u003e\n","brand":"CliniEco Medical","offers":[{"title":"2-Pack","offer_id":49082000212190,"sku":"CLI-PENN-100-2PK","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Single","offer_id":49039191048414,"sku":"CLI-PENN-100","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/5741\/0526\/files\/insulin-pen-needles-32g-4mm-100-box-1.jpg?v=1789404348","url":"https:\/\/clinieco.ca\/en-us\/products\/insulin-pen-needles-32g-4mm-100-box","provider":"CliniEco Medical","version":"1.0","type":"link"}