{"title":"Laboratory Consumables","description":"\u003cp\u003eA clinical laboratory in Canada runs on consumables the way a kitchen runs on clean pans: nothing moves without them. One morning run can involve a dozen specimen bags, several racks of centrifuge tubes, a stack of petri dishes and a tray of sample cups, and every one of those items has to satisfy a transport or handling requirement before it ever reaches the bench. This collection pulls the recurring lab consumables onto one page so a lab manager can build a single purchase order.\u003c\/p\u003e\n\n\u003ch2\u003eWhere these consumables sit in a specimen workflow\u003c\/h2\u003e\n\u003cp\u003eSpecimen handling follows a fixed sequence: collect, contain, transport, receive, process. Sample cups, stool collection kits and 120 mL containers belong to collection. Centrifuge tubes and serological pipettes belong to processing. Petri dishes belong to culture work. Specimen transport bags and leak-resistant secondary packaging belong to the step in the middle — the one that gets audited when something leaks in a courier van. Parafilm sits across all of them as a sealing and covering material.\u003c\/p\u003e\n\n\u003ch2\u003eA morning run, in the order the bench actually works\u003c\/h2\u003e\n\u003cp\u003eThe courier arrives before the bench opens. Bags come out of the drawer first: each primary container goes into a specimen bag with the requisition slipped into the outside document pouch, and an absorbent pad sits under the container. Bags are then packed into the secondary transport box. Once specimens are received, tubes are labelled, spun, and the supernatant is drawn off with a serological pipette. Plate work follows, and unused plates go back into the sleeve and the sleeve back into the refrigerator. The consumables that ran out first are almost always bags and tubes, not instruments.\u003c\/p\u003e\n\n\u003ch2\u003eSelection table: specification, pack size and where each item fits\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003ePack \/ case\u003c\/th\u003e\n\u003cth\u003eSuited to\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/en-us\/products\/clinieco-medical-specimen-bags-6-9-inch-95kpa-certified-100-pack\"\u003eUN3373 Specimen Transport Bags, 6 × 9 in\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e95 kPa rated, document pouch, absorbent pad\u003c\/td\u003e\n\u003ctd\u003e100-pack\u003c\/td\u003e\n\u003ctd\u003eSingle tube or small container transport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/en-us\/products\/clinieco-medical-specimen-bags-6-9-inch-95kpa-certified-100-pack\"\u003eUN3373 Specimen Transport Bags, 8 × 10 in\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e95 kPa rated, document pouch, absorbent pad\u003c\/td\u003e\n\u003ctd\u003e100-pack\u003c\/td\u003e\n\u003ctd\u003eTwo to four containers per bag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/en-us\/products\/clinieco-medical-specimen-bags-6-9-inch-95kpa-certified-100-pack\"\u003eUN3373 Specimen Transport Bags, 12 × 15 in\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e95 kPa rated, document pouch, absorbent pad\u003c\/td\u003e\n\u003ctd\u003e100-pack\u003c\/td\u003e\n\u003ctd\u003eMulti-container batches and larger containers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/en-us\/products\/clinieco-medical-specimen-transport-bags-6x9-3-wall-100-pack\"\u003eSpecimen Transport Bags, 6 × 9 in, 3-wall\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e3-wall leak-resistant construction, document pouch\u003c\/td\u003e\n\u003ctd\u003e1,000 bags (10-box case)\u003c\/td\u003e\n\u003ctd\u003eHigh-volume clinics and collection sites\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/en-us\/products\/clinieco-specimen-cups-graduated-leak-proof-90-ml-100-pcs\"\u003eLeak-Proof Sample Cups\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e90 mL, graduated, leak-proof lid\u003c\/td\u003e\n\u003ctd\u003e600 cups (6 × 100-pack case)\u003c\/td\u003e\n\u003ctd\u003eUrine and fluid collection at the bench\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/en-us\/products\/specimen-container-120ml-sterile-screw-cap-100-pack\"\u003eSpecimen Container 120 mL\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eSterile, screw cap\u003c\/td\u003e\n\u003ctd\u003e200 containers (2 × 100-pack case)\u003c\/td\u003e\n\u003ctd\u003eSterile fluid and tissue collection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/en-us\/products\/stool-collection-kit-sterile-100-pack\"\u003eStool Collection Kit\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eSterile, scoop and label included\u003c\/td\u003e\n\u003ctd\u003e100 kits\u003c\/td\u003e\n\u003ctd\u003eParasitology and microbiology collection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/en-us\/products\/sterile-centrifuge-tubes-15ml-500-case\"\u003eSterile Centrifuge Tubes 15 mL\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eGraduated, screw cap, sterile\u003c\/td\u003e\n\u003ctd\u003e500 per case\u003c\/td\u003e\n\u003ctd\u003eSmall-volume separation and aliquoting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/en-us\/products\/sterile-centrifuge-tubes-50ml-500-case\"\u003eSterile Centrifuge Tubes 50 mL\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eGraduated, screw cap, sterile\u003c\/td\u003e\n\u003ctd\u003e500 per case\u003c\/td\u003e\n\u003ctd\u003eCell culture, large-volume separation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/en-us\/products\/petri-dish-100x15mm-sterile-polystyrene-500-case\"\u003eSterile Petri Dish 100 × 15 mm\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003ePolystyrene, sterile\u003c\/td\u003e\n\u003ctd\u003e320 per case\u003c\/td\u003e\n\u003ctd\u003eCulture plating and environmental sampling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/en-us\/products\/clinieco-lab-consumables-parafilm-pipettes\"\u003eParafilm \u0026amp; Serological Pipettes\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eSealing film and graduated pipettes\u003c\/td\u003e\n\u003ctd\u003eCombined lab pack\u003c\/td\u003e\n\u003ctd\u003eSealing plates and volumetric transfer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eSpecimen transport: UN3373, 95 kPa and what the rules ask for\u003c\/h2\u003e\n\u003cp\u003eMost diagnostic specimens travel as Category B biological substances, which means UN3373 marking, a primary receptacle, leak-resistant secondary packaging with absorbent material, and enough rigidity to survive a 95 kPa pressure differential. In Canada those requirements arrive through the Transportation of Dangerous Goods Regulations (SOR\/2001-286), which adopt the UN packaging instructions. The practical test for a lab manager is simple: if the bag bursts inside the transport box, does the absorbent pad hold the contents and does the outer packaging stay intact? A bag without a document pouch also breaks the chain between specimen and requisition, so it fails the workflow even when it passes the pressure test.\u003c\/p\u003e\n\n\u003ch2\u003eWhat to confirm before you order\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure rating stated on the bag or carton.\u003c\/strong\u003e Look for a stated 95 kPa rating and the UN3373 marking, not a general “transport bag” description.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbsorbent pad and document pouch included or not.\u003c\/strong\u003e Some bags ship with both, some with neither. A missing pad means the lab buys and stuffs pads separately, which is where compliance slips.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSterility and sealing on containers.\u003c\/strong\u003e Sterile containers need an intact seal and a readable lot. Screw caps should be checked for cross-threading on arrival, before the first sample goes in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGraduations and cap fit for your centrifuge.\u003c\/strong\u003e Tube diameter and cap profile have to match the rotor buckets in use. Confirm 15 mL and 50 mL formats against the rotor before committing to a case of 500.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase pack versus bench volume.\u003c\/strong\u003e A 500-unit case is convenient for a hospital lab and impractical for a two-bench clinic. Match the case to weekly throughput so nothing sits past its usable date.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eStorage and lot control for sterile consumables\u003c\/h2\u003e\n\u003cp\u003eSterile consumables keep their status only while the packaging is intact. Store cases off the floor, in a dry room away from direct light, and work through oldest expiry first. Record the lot number when a case is opened, not when it is ordered — that is the point at which traceability starts. Any sleeve that arrives crushed, damp or with a broken seal is quarantined and reported rather than used.\u003c\/p\u003e\n\n\u003ch2\u003eQuestions lab managers ask before switching suppliers\u003c\/h2\u003e\n\u003ch3\u003eDo these bags meet Canadian transport requirements?\u003c\/h3\u003e\n\u003cp\u003eThe bags in this collection are specified at 95 kPa with UN3373 marking, which is the standard requirement for Category B specimens. Confirm the marking on the carton you receive, since the marking must be printed on the packaging the specimen actually travels in.\u003c\/p\u003e\n\u003ch3\u003eCan one bag size cover the whole lab?\u003c\/h3\u003e\n\u003cp\u003eRarely. Most labs run two sizes: a small bag for single tubes and a larger bag for multi-container batches. A third 3-wall format is usually kept for high-volume collection sites where bags are filled, sealed and stacked quickly.\u003c\/p\u003e\n\u003ch3\u003eHow much stock should a clinic lab hold?\u003c\/h3\u003e\n\u003cp\u003eFour to six weeks of cover on bags, cups and tubes, and one to two cases of low-turnover items such as petri dishes. Consumables that expire should be ordered against measured throughput, not against a discount tier.\u003c\/p\u003e\n\n\u003ch3\u003eWhich specimen bag size fits a 120 mL container and its requisition?\u003c\/h3\u003e\n\u003cp\u003eA 6 × 9 inch bag takes one 120 mL container with the requisition in the outside document pouch; step up to 7 × 11 inch the moment two containers share a bag. The pouch has to stay outside the specimen compartment, because the requisition must never travel in the same pocket as a leaking primary receptacle. Our \u003ca href=\"\/en-us\/products\/clinieco-medical-specimen-bags-6-9-inch-95kpa-certified-100-pack\"\u003eUN3373 specimen transport bags\u003c\/a\u003e carry both the document pouch and the absorbent pad, and that one product page covers 6 × 9, 7 × 11, 8 × 10 and 12 × 15 inch formats.\u003c\/p\u003e\n\u003ch3\u003eIs an absorbent pad still required if the container is leak-proof?\u003c\/h3\u003e\n\u003cp\u003eYes. The pad exists for the failure case, not for the container you trust. Category B packaging runs on a primary receptacle, leak-resistant secondary packaging with absorbent material for liquids, and enough rigidity to survive a 95 kPa pressure differential — the P650 packing instruction adopted through Canada's Transportation of Dangerous Goods Regulations (SOR\/2001-286). A leak-proof lid is a claim about the lid; it says nothing about a courier van in February. Our \u003ca href=\"\/en-us\/products\/clinieco-medical-specimen-transport-bags-6x9-3-wall-100-pack\"\u003e3-wall leak-resistant specimen transport bags\u003c\/a\u003e ship with the pad and pouch in place, 1,000 bags per 10-box case.\u003c\/p\u003e\n\u003ch3\u003eShould a clinic lab standardize on 15 mL or 50 mL centrifuge tubes?\u003c\/h3\u003e\n\u003cp\u003eStandardize on 15 mL and keep 50 mL for culture work and large-volume separation. Most serum, urine and aliquot volumes fit a 15 mL tube, it costs less per unit and it loads into common rotor buckets without an adapter, while a 50 mL tube takes bucket space and is wasted on a 3 mL sample. Check tube diameter and cap profile against the rotor in use before committing to a case of 500. Stock \u003ca href=\"\/en-us\/products\/sterile-centrifuge-tubes-15ml-500-case\"\u003esterile 15 mL centrifuge tubes\u003c\/a\u003e as the default and \u003ca href=\"\/en-us\/products\/sterile-centrifuge-tubes-50ml-500-case\"\u003esterile 50 mL centrifuge tubes\u003c\/a\u003e as the exception.\u003c\/p\u003e\n\u003cp\u003eBuying for a clinic, care home or laboratory rather than a single site? Volume pricing and account setup are handled through our \u003ca href=\"\/en-us\/pages\/wholesale\"\u003ewholesale enquiry page\u003c\/a\u003e.\u003c\/p\u003e\n","products":[{"product_id":"clinieco-specimen-cups-graduated-leak-proof-90-ml-100-pcs","title":"CliniEco Leak-Proof Sample Cups — 90 mL, 600 Cups (6 × 100-Pack Case)","description":"\u003cdiv class=\"cliniEco-product\"\u003e\n  \u003cp\u003e\u003ca href=\"\/en-us\/blogs\/medical-supply-guide\/urine-sample-cups-canadian-standards-labelling-leaks\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/5741\/0526\/files\/clini_specimen-cups_7.jpg?v=1783020280\" alt=\"CliniEco Leak-Proof Sample Cups — 90 mL, 600 Cups (6 × 100-Pack Case)\" width=\"480\" height=\"480\" loading=\"lazy\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eCliniEco Specimen Cups – Graduated\u003c\/h2\u003e\n\n  \u003ch3\u003eProduct Overview\u003c\/h3\u003e\n  \u003cp\u003eCliniEco graduated specimen cups are precision-molded \u003cstrong\u003emedical-grade polypropylene containers\u003c\/strong\u003e designed for the safe collection, transport, and storage of urine and other liquid specimens. It is a single-use urine specimen cup for routine urine collection in clinics, laboratories and diagnostic collection sites. Clear translucent walls with bold molded graduations enable fast, accurate volume readings without the need for a separate measuring device.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSix bags of a hundred cups, 600 in total for $53.94 — $8.99 a bag and about nine cents a cup.\u003c\/strong\u003e The graduations are moulded into the wall in millilitres and ounces, so a collection site reads a volume without reaching for a cylinder. The \u003ca href=\"\/en-us\/products\/specimen-container-120ml-sterile-screw-cap-100-pack\"\u003e120 mL screw-cap container\u003c\/a\u003e is the larger option when a site collects a bigger volume.\u003c\/p\u003e\n\u003ch2\u003eHow many cups does the six-bag pack hold, and what does each one cost?\u003c\/h2\u003e\n\u003cp\u003eSix bags at a hundred cups each is 600 cups, and $53.94 across them is $8.99 a bag or roughly nine cents a cup. Against a single-bag purchase the arithmetic is the same per cup — bags are not discounted here — so the case is about fewer purchase orders and less shelf space, not a lower unit price. Put the number in a budget line: a site collecting sixty specimens a week uses about five hundred cups a year, or one pack.\u003c\/p\u003e\n\u003ch2\u003eIs the cup sterile, and what should be checked before culture work?\u003c\/h2\u003e\n\u003cp\u003eThe listing's sterility line reads \"Non-clean (clean option available)\", which should be read literally before an order goes in for microbiology, because a clean container and a sterile container are not the same article and a culture protocol may name one of them. Ask us and we will confirm what the factory ships and what the clean option means in writing. For routine urinalysis, drug screening and general collection the cup as supplied is the usual choice; for a validated sterile method, confirm first.\u003c\/p\u003e\n\u003ch2\u003eWhat temperature range and lid does the cup carry?\u003c\/h2\u003e\n\u003cp\u003ePolypropylene, rated from −20 °C to 121 °C on the listing, which covers refrigerated holding and an autoclave cycle for waste handling. The lid is a snap cap with a tamper-evident ring and a silicone gasket, so a filled cup seals against a bag or a rack rather than leaking into it. The graduations are accurate enough to read a collection volume off the wall, and no substitute for a pipette when a method calls for one.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ccaption\u003e90 mL graduated specimen cup — capacity, lid, sterility line and price for the six-bag pack (CAD)\u003c\/caption\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eMedical-grade polypropylene\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacity\u003c\/td\u003e\n\u003ctd\u003e90 mL on this listing; 60 mL and 120 mL also listed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGraduations\u003c\/td\u003e\n\u003ctd\u003eMillilitres and ounces, moulded in, ±5%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLid\u003c\/td\u003e\n\u003ctd\u003eSnap cap, tamper-evident ring, silicone gasket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSterility line as listed\u003c\/td\u003e\n\u003ctd\u003e\"Non-clean (clean option available)\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature\u003c\/td\u003e\n\u003ctd\u003e−20 °C to 121 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePacking\u003c\/td\u003e\n\u003ctd\u003e100 cups per bag, 10 bags per case\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eCLI-SC-90ML-100-6PK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice\u003c\/td\u003e\n\u003ctd\u003e$53.94 for the six-bag pack; $8.99 a bag, nine cents a cup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eSizing a collection site.\u003c\/strong\u003e The \u003ca href=\"\/en-us\/pages\/clinic-supply-planner\"\u003eclinic supply planner\u003c\/a\u003e turns specimens per week into bags per quarter, and volume terms for a laboratory network are quoted on the \u003ca href=\"\/en-us\/pages\/wholesale\"\u003eordering page\u003c\/a\u003e. Where a written method names a container the listing does not, the \u003ca href=\"\/en-us\/pages\/sterilization-compliance-consultation\"\u003ecompliance desk\u003c\/a\u003e answers it in writing. CliniEco Medical carries the 90 mL cup in Canada under MDEL #35334.\u003c\/p\u003e\n\n  \u003ch3\u003eKey Features\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eClear Graduated Markings\u003c\/strong\u003e – Molded-in graduations printed in mL\/oz on the cup wall; accurate to ±5% across the measured range.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLeak-Proof Snap Cap\u003c\/strong\u003e – Tamper-evident, one-way threaded lid with a silicone gasket ensures secure sealing during transport; no spills in transit.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMedical-Grade Polypropylene\u003c\/strong\u003e – Autoclavable at 121 °C, chemically resistant to most laboratory reagents and diagnostic reagents.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCost-Effective Bulk Solution\u003c\/strong\u003e – Significantly lower per-unit cost versus glass or branded polypropylene alternatives; savings of 35–50% are typical for high-volume laboratory accounts.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eGraduated Volume Marks\u003c\/strong\u003e – Printed mL graduations on the cup wall for direct reading at the bench.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eSpecifications\u003c\/h3\u003e\n  \u003ctable\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePolypropylene (PP), medical-grade\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCapacity\u003c\/td\u003e\n\u003ctd\u003e60 mL \/ 90 mL \/ 120 mL (options)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eGraduations\u003c\/td\u003e\n\u003ctd\u003emL and oz markings, molded-in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eLid Style\u003c\/td\u003e\n\u003ctd\u003eSnap cap with tamper-evident ring\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSterility\u003c\/td\u003e\n\u003ctd\u003eNon-clean (clean option available)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTemperature Range\u003c\/td\u003e\n\u003ctd\u003e-20 °C to 121 °C (autoclavable)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003e100 cups per bag, 10 bags per case\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eSee product documentation on request\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eShelf Life\u003c\/td\u003e\n\u003ctd\u003e5 years\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/table\u003e\n\n  \u003ch3\u003eApplications\u003c\/h3\u003e\n  \u003cp\u003eIdeal for \u003cstrong\u003eurinalysis, drug screening programs, clinical pathology labs, hospital wards, occupational health screening, and diagnostic point-of-care collection\u003c\/strong\u003e. Suitable for both human and veterinary specimen workflows.\u003c\/p\u003e\n\n  \u003ch3\u003eB2B Volume Inquiry\u003c\/h3\u003e\n  \u003cp\u003e\u003cstrong\u003eFactory-direct pricing\u003c\/strong\u003e with graduated volume tiers starting at 500 cases. Private labeling, custom graduation ranges, and clean options are all available upon request. Contact our B2B team for a compliance package, SDS, and a competitive quote for your laboratory supply chain.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eRelated Reading\u003c\/h3\u003e\n\u003cp\u003eLearn more about choosing and using this product category:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/clinieco.ca\/blogs\/medical-supply-guide\/specimen-collection-choosing-the-right-leak-proof-sample-cups-for-canadian-labs\"\u003eSpecimen Collection: Choosing the Right Leak-Proof Sample Cups for Canadian Labs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/clinieco.ca\/blogs\/medical-supply-guide\/specimen-bag-types-leak-proof-standards-for-canadian-labs\"\u003eSpecimen Bag Types: Leak-Proof Standards for Canadian Labs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/clinieco.ca\/blogs\/medical-supply-guide\/specimen-bag-labeling-requirements-for-canadian-laboratories-phac-and-transport-canada-standards\"\u003eSpecimen Bag Labeling Requirements for Canadian Laboratories: PHAC and Transport Canada Standards\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- GEO-RELATED-READING --\u003e","brand":"CliniEco Medical","offers":[{"title":"6-Pack","offer_id":49081995231454,"sku":"CLI-SC-90ML-100-6PK","price":53.94,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/5741\/0526\/files\/clini_specimen-cups_7.jpg?v=1783020280"},{"product_id":"clinieco-medical-specimen-bags-6-9-inch-95kpa-certified-100-pack","title":"UN3373 Compliant Specimen Transport Bags — 6×9 to 12×15 in, IATA P650, Two-Pocket + Document Pouch","description":"\u003ch3\u003eUN3373 compliant specimen transport bags — the size most Canadian clinics actually use\u003c\/h3\u003e\n\u003cp\u003e6 × 9 inches (152 × 229 mm) is the workhorse size for routine specimen transport. Blood tubes, urine containers, swabs, histology pots — a compliant transport bag takes them without waste and without forcing you into an oversized bag for a small sample.\u003c\/p\u003e\n\u003cp\u003eIf you are setting up specimen transport for a clinic, a collection room, a nursing station or a pharmacy, this is almost always the size to start with.\u003c\/p\u003e\n\u003cp\u003eWhichever specimen collection workflow you run — venous blood, urine, swabs, tissue or cytology — the sample leaves the room in one of these bags, with the request form kept in the separate document pouch.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/en-us\/blogs\/medical-supply-guide\/specimen-transport-bags-un3373-iata-650-compliance-guide\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/5741\/0526\/files\/Catch5E3B.jpg?v=1793123156\" alt=\"UN3373 compliant specimen transport bag — 6×9 in, IATA P650, two-pocket with document pouch\" width=\"480\" height=\"480\" loading=\"lazy\"\u003e\u003c\/a\u003e\u003c\/p\u003e\u003ch2\u003eDo 95 kPa specimen bags meet UN3373 for courier shipping in Canada?\u003c\/h2\u003e\n\u003cp\u003eUN3373 is a transport classification for Category B biological substances, and the packaging rules behind it are P650 on the road and IATA 650 in the air. Clinics that never fly a sample often compare this bag with the 6 × 9 inch ground-transport specimen bag; the difference is the pressure rating, because a flight brings the 95 kPa test into scope. The two pockets do two jobs: the front pocket holds the specimen container, and the back pocket holds the requisition so the paperwork never sits against the sample. Absorbent material, where P650 (7)(d) requires it, goes into the front pocket alongside the container. The 95 kPa figure is the internal pressure test in P650 (7)(e), held without leakage. No design-type approval is issued, and packing duty rests with the shipper.\u003c\/p\u003e\n\u003ch2\u003eWhat does one specimen bag cost, and how is a box packed?\u003c\/h2\u003e\n\u003cp\u003eThe box is the priced unit, so the arithmetic stays short. One box carries 100 bags, and the case takes ten of those boxes — 1,000 bags. The amount for each format sits in the variant selector at the top of this page, and the per-bag figure follows from it: divide the box amount by 100, the case amount by 1,000. A laboratory that ships every working day buys the case; a collection room sending a handful of samples a week starts with the single box. Both SKUs sit in the table below, each with the pack count its price refers to.\u003c\/p\u003e\n\u003ch2\u003eWhich specimens fit a 6 × 9 inch bag, and when is it the wrong size?\u003c\/h2\u003e\n\u003cp\u003eBlood tubes, urine containers, swab tubes and histology pots all sit inside a 6 × 9 inch bag with room left for the absorbent pad, which is why this is the size most Canadian clinics standardise on. It stops being the right answer when the primary container is a multi-litre bag or a large cytology jar: the walls cannot close around the sample, and a larger format is the honest choice. The table keeps size, build, rating, pack count and price on one line each, so the size can be checked against what you actually send.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ccaption\u003e6 × 9 inch 95 kPa specimen bag — specification and case arithmetic\u003c\/caption\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6 × 9 in (152 × 229 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo-pocket: leak-resistant specimen bag with a separate back document pouch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAbsorbent pad\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot included — 15 × 25 cm \/ 150 mL pads available separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePressure performance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e95 kPa internal, per P650 (7)(e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMarking\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUN3373 and biohazard, printed on the bag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eClosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eZip-lock, plus a separate document compartment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePack\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100 bags per box; ten boxes per case (1,000 bags)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSKU and price\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCLI-BAG-UN3373-100 — box of 100 bags; CLI-BAG-UN3373-1000 — case of ten boxes (1,000 bags). Both amounts are in the variant selector above.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eOrdering for a collection room runs through the \u003ca href=\"\/en-us\/pages\/clinic-supply-planner\"\u003eclinic supply planner\u003c\/a\u003e, which turns a weekly specimen count into a reorder point, and institutional buying sits under \u003ca href=\"\/en-us\/pages\/wholesale\"\u003eour clinic ordering desk\u003c\/a\u003e. CliniEco Medical is the Canadian importer of record for this bag, MDEL #35334.\u003c\/p\u003e\n\u003ch3\u003eSpecifications you can hold us to\u003c\/h3\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e6 × 9 in (152 × 229 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003eTwo-pocket — leak-resistant specimen bag with a separate back document pouch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e\u003cstrong\u003eAbsorbent pad\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003eNot included — 15 × 25 cm \/ 150 mL pads available separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e\u003cstrong\u003ePressure performance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e95 kPa, per P650 (7)(e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e\u003cstrong\u003eClosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003eZip-lock plus separate outer document compartment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e\u003cstrong\u003eMarking\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003eUN3373 and biohazard marking\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e\u003cstrong\u003ePack\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e100 per box · 10 boxes per case (1,000 bags)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e\u003cstrong\u003eImporter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003eCliniEco Medical — Health Canada MDEL #35334\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat the two pockets do for you\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003eFront pocket\u003c\/strong\u003e — holds the primary receptacle. Sealed separately from the outside world, so a leak never reaches the carrier.\u003c\/p\u003e\n\u003cp\u003e• \u003cstrong\u003eAbsorbent pad\u003c\/strong\u003e — sits in the front pocket beside the container, where P650 (7)(d) requires it. Supplied separately, so you buy it when your samples are liquids instead of paying for it on every bag.\u003c\/p\u003e\n\u003cp\u003e• \u003cstrong\u003eBack document pocket\u003c\/strong\u003e — keeps the requisition and the specimen physically separate, which is both the P650 requirement and simple good practice. Samples turning up with a soaked requisition are a daily problem for laboratories.\u003c\/p\u003e\n\n\u003ch3\u003eWhat UN3373 and 95 kPa actually mean\u003c\/h3\u003e\n\u003cp\u003eThis is the part most listings get wrong, so here it is properly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUN3373 is a transport classification, not a product feature.\u003c\/strong\u003e It covers Category B biological substances — the human or animal specimens that move between a clinic, a laboratory and a referral lab every day. The packaging rules for Category B are set out in \u003cstrong\u003eADR P650\u003c\/strong\u003e (and IATA 650 for air), and they are what this bag is built for.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e95 kPa is a performance requirement, not a material.\u003c\/strong\u003e P650 (7)(e) says the primary receptacle or the secondary packaging must withstand, without leakage, an internal pressure of 95 kPa. That is a test the packaging has to pass. It does not tell you what the bag is made of, and a bag is not \"95 kPa\" the way it is \"polyethylene\". Any supplier who cannot explain that distinction is selling you a word, not a specification.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe absorbent pad is not a free upgrade — it is required.\u003c\/strong\u003e P650 (7)(d) requires absorbent material to be placed between the primary receptacle and the secondary packaging, sufficient to absorb the entire liquid content. That is why we supply the pad with the bag rather than leaving you to work it out at the bench. If you are buying a specimen bag without absorbent material, check what you are relying on for compliance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eP650 does not require a design-type approval or a certificate.\u003c\/strong\u003e The obligation sits with the shipper. A test report is commercial evidence and is genuinely useful, but a supplier claiming the regulation \"requires a certificate\" is mis-stating it.\u003c\/p\u003e\n\u003ch3\u003eWhat we can state plainly\u003c\/h3\u003e\n\u003cp\u003e• \u003cstrong\u003eThe pressure test figure is 95 kPa, per P650 (7)(e).\u003c\/strong\u003e Named, and quotable.\u003c\/p\u003e\n\u003cp\u003e• \u003cstrong\u003eAbsorbent pads supplied with the bag, per P650 (7)(d).\u003c\/strong\u003e Not an optional extra when your samples are liquids.\u003c\/p\u003e\n\u003cp\u003e• \u003cstrong\u003eWe stock and ship from Toronto, Ontario.\u003c\/strong\u003e We are the importer of record: Ecology Source New Energy Technology Co., LTD. o\/a CliniEco Medical, Health Canada MDEL #35334.\u003c\/p\u003e\n\u003ch3\u003eThe documentation we hold — and how to check it\u003c\/h3\u003e\n\u003cp\u003eOur specimen bags are built to \u003cstrong\u003eADR \/ IATA P650\u003c\/strong\u003e, which is the rule set that governs Category B biological substances in transport. In practice that means two things: absorbent pads supplied with the bag for the liquids that P650 \u003cstrong\u003e(7)(d)\u003c\/strong\u003e covers, and a construction that meets the \u003cstrong\u003e95 kPa\u003c\/strong\u003e internal pressure performance requirement in \u003cstrong\u003eP650 (7)(e)\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest documentation is held per size.\u003c\/strong\u003e P650 itself does not require a design-type approval or a certificate, and any supplier who tells you it does is mis-stating the regulation. Reports are commercial evidence, and they are genuinely useful when you need to satisfy a laboratory or an auditor. So: \u003cstrong\u003eask us which sizes we hold test reports for, and we will tell you exactly what we have before you order.\u003c\/strong\u003e We would rather you ask a direct question and get a direct answer than buy on the strength of a word.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReport reference.\u003c\/strong\u003e Test report TJA20211102-0116 issued by China Packaging Research \u0026amp; Test Center (Tianjin), CNAS L0227. Full report available on request for audit purposes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat matters more, and is often missed:\u003c\/strong\u003e the report has to identify the item it tested. ISO\/IEC 17025 §7.8 requires a test report to uniquely identify the sample tested. A report that names a model number but not a size does not demonstrate performance for a size you are buying. If you are relying on a report for an audit, check that it names the size on the face of the document.\u003c\/p\u003e\n\n\u003cp\u003e• \u003cstrong\u003eIf a different size suits your specimens better, we will say so\u003c\/strong\u003e — including pointing you to a larger bag if that is the honest answer.\u003c\/p\u003e\n\u003ch3\u003eWhy buy specimen transport bags from us rather than a general supplier\u003c\/h3\u003e\n\u003cp\u003eTransport packaging is a compliance question, not a stationery question. A clinic that gets it wrong is the one that carries the exposure, and the laboratory receiving a leaking or non-conforming sample is entitled to reject it and ask for a repeat. We sell this line because we can explain the rules, name the clause, explain what a test report does and does not prove, and tell you what to write on the paperwork. Most sellers of \"95 kPa bags\" cannot do any of those four things.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOrdering.\u003c\/strong\u003e Ships from Toronto. Tell us your specimen volumes and route, and we will confirm the right size and pack in writing before you commit.\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the right option for your clinic\u003c\/h2\u003e\n\u003cp\u003eBefore you order, the decisions that actually change the result are the three packaging layers, what 95 kPa actually certifies, and what an inspector asks for when a specimen ships. The full buyer's guide covers them step by step: \u003ca href=\"https:\/\/clinieco.ca\/blogs\/medical-supply-guide\/un3373-category-b-packaging-explained-iata-pi-650-and-95-kpa\"\u003eUN3373 Category B Packaging Explained: IATA PI 650, 95 kPa and What Inspectors Look For\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eRelated supplies for the same workflow\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-us\/products\/clinieco-specimen-cups-graduated-leak-proof-90-ml-100-pcs\"\u003egraduated leak-proof specimen cups, 90 mL, 100 per pack\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-us\/products\/clinieco-biohazard-medical-waste-bags-red-30-gallon-leak-proof\"\u003ered biohazard medical waste bags, 30 gallon\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"\/en-us\/products\/clinieco-specimen-cups-graduated-leak-proof-90-ml-100-pcs\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/5741\/0526\/files\/clini_specimen-cups_7.jpg?v=1783020280\" alt=\"graduated leak-proof specimen cups, 90 mL\" loading=\"lazy\" width=\"480\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eRelated articles\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-us\/blogs\/medical-supply-guide\/95-kpa-specimen-bags-canada-tdg-rules-liability-and-what-non-compliance-costs\"\u003e95 kPa Specimen Bags in Canada: The Transport Rules, Who Is Liable, and What Non-Compliance Costs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-us\/blogs\/medical-supply-guide\/where-to-buy-medical-specimen-transport-bags-research-laboratories-british-columbia\"\u003eWhere to Buy Medical Specimen Transport Bags for Research Laboratories in British Columbia\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"CliniEco Medical","offers":[{"title":"6×9 in \/ Box of 100","offer_id":48503717757150,"sku":"CLI-BAG-UN3373-100","price":321.0,"currency_code":"CAD","in_stock":true},{"title":"6×9 in \/ Case of 1,000 (10 boxes)","offer_id":48595342393566,"sku":"CLI-BAG-UN3373-1000","price":2054.0,"currency_code":"CAD","in_stock":true},{"title":"7×11 in \/ Box of 100","offer_id":49302152446174,"sku":"CLI-BAG-UN3373-7X11-100","price":458.0,"currency_code":"CAD","in_stock":true},{"title":"7×11 in \/ Case of 1,000 (10 boxes)","offer_id":49302152478942,"sku":"CLI-BAG-UN3373-7X11-1000","price":2931.0,"currency_code":"CAD","in_stock":true},{"title":"8×10 in \/ Box of 100","offer_id":49302152511710,"sku":"CLI-BAG-UN3373-8X10-100","price":475.0,"currency_code":"CAD","in_stock":true},{"title":"8×10 in \/ Case of 1,000 (10 boxes)","offer_id":49302152544478,"sku":"CLI-BAG-UN3373-8X10-1000","price":3040.0,"currency_code":"CAD","in_stock":true},{"title":"12×15 in \/ Box of 100","offer_id":49302152577246,"sku":"CLI-BAG-UN3373-12X15-100","price":1814.0,"currency_code":"CAD","in_stock":true},{"title":"12×15 in \/ Case of 1,000 (10 boxes)","offer_id":49302152610014,"sku":"CLI-BAG-UN3373-12X15-1000","price":11612.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/5741\/0526\/files\/Catch5E3B.jpg?v=1793123156"},{"product_id":"clinieco-medical-specimen-transport-bags-6x9-3-wall-100-pack","title":"CliniEco Medical Specimen Transport Bags — 6×9\", 3-Wall Leak-Resistant, Document Pouch \u0026 Absorbent Pad, 1,000 Bags (10-Box Case)","description":"\u003cp\u003e\u003ca href=\"\/en-us\/blogs\/medical-supply-guide\/bulk-ordering-specimen-transport-bags-quebec-95kpa-formats-case-sizes\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/5741\/0526\/files\/01_main_white_clean_614c66dd-97c6-4a84-88b6-a46d9f4d503b.jpg?v=1791271657\" alt='CliniEco Medical Specimen Transport Bags — 6×9\", 3-Wall Leak-Resistant, Document Pouch \u0026amp; Absorbent Pad, 1,000 Bags (10-Box Case)' width=\"480\" height=\"480\" loading=\"lazy\"\u003e\u003c\/a\u003e\u003c\/p\u003e\u003ch2\u003e3-Wall Specimen Transport Bags\u003c\/h2\u003e\n\u003cp\u003eEveryday specimen transport for clinics, walk-in practices, long-term care and home care. A three-wall leak-resistant bag with an outer document pouch and an internal absorbent pad — practical protection for urine, stool and sputum samples moved by ground between collection sites and the lab.\u003c\/p\u003e\n\u003ch2\u003eDoes a 6 × 9 inch three-wall specimen bag suit my transport, or do I need a 95 kPa bag?\u003c\/h2\u003e\n\u003cp\u003eThis bag is the fit for specimens that move by ground between the collection site and the lab; for anything that flies, the bag you need is the \u003ca href=\"\/en-us\/products\/clinieco-medical-specimen-bags-6-9-inch-95kpa-certified-100-pack\"\u003eUN3373 95 kPa specimen transport bag\u003c\/a\u003e. That split is the whole decision. This one carries three layers — an inner absorbent layer, the main bag and an outer layer — with an outer document pouch that keeps the requisition readable without opening the biohazard bag, a built-in absorbent pad of about 3 × 5 inches, and a press-to-close seal with a write-on zone and a barcode area. The product page states the limit plainly: it is not pressure-tested for air transport.\u003c\/p\u003e\n\n\u003ch2\u003eHow is one bag packed and sealed, and how many do we fill in a week?\u003c\/h2\u003e\n\u003cp\u003eOne specimen per bag. The sample goes into the main bag, the absorbent pad stays inside it, and the requisition slips into the outer pouch where it can be read and stamped without opening the bag; the write-on zone takes the collection details and the barcode area takes your lab's tracking label. Because the count that drives ordering is specimens per pickup day, not bags per shelf, a site collecting 20 specimens on each of 21 working days is working through roughly 420 bags a month — the example figure used in the table below.\u003c\/p\u003e\n\n\u003ch2\u003eHow many bags come in a case, and what does one cost?\u003c\/h2\u003e\n\u003cp\u003eA case holds 1,000 bags, packed as 10 packs of 100, and the case is listed at $127.60 — divide that by ten for the 100-bag pack figure and by a thousand for the bag figure. The 100-bag pack is how the case is broken down inside the carton; the 1,000-bag case is what this listing prices, so the pack figure is only a way to see what a week of pickups costs. At the 420-bag month above, one case covers about two and a half months, so a case per quarter keeps a mid-size collection site supplied without a weekly reorder.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBag size\u003c\/td\u003e\n\u003ctd\u003e6 × 9 in (150 × 240 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eThree-wall leak-resistant: inner absorbent layer, main bag, outer layer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDocument pouch\u003c\/td\u003e\n\u003ctd\u003eOuter pouch — the requisition stays outside the biohazard bag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAbsorbent pad\u003c\/td\u003e\n\u003ctd\u003eBuilt in, approx. 3 × 5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003ePress-to-close seal with write-on zone and barcode area\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePacking\u003c\/td\u003e\n\u003ctd\u003e100 bags per pack · 10 packs per case (1,000 bags)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCase price\u003c\/td\u003e\n\u003ctd\u003e$127.60 for the case of 1,000 — divide by ten for the 100-bag pack, by a thousand for the bag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAir transport\u003c\/td\u003e\n\u003ctd\u003eNot pressure-tested — a 95 kPa UN3373 bag is the air-travel item\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eSizing a standing order takes two minutes in the \u003ca href=\"\/en-us\/pages\/clinic-supply-planner\"\u003eclinic supply and cost planner\u003c\/a\u003e, which turns your own specimen count into bags per month, and case quantities are quoted on a \u003ca href=\"\/en-us\/pages\/clinic\"\u003eclinic or institutional account\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-wall leak-resistant construction\u003c\/strong\u003e — inner absorbent layer, main bag, outer layer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter document pouch\u003c\/strong\u003e — requisition stays outside the biohazard bag, readable without opening it\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in absorbent pad\u003c\/strong\u003e (approx. 3 × 5 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress-to-close seal\u003c\/strong\u003e with write-on zone and barcode area\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 6 in × 9 in (150 × 240 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIntended use\u003c\/h3\u003e\n\u003cp\u003eIntended for routine ground transport of clinical specimens in clinics, walk-in practices, long-term care and home care. Not pressure-tested for air transport — if your samples travel by air, use our \u003ca href=\"\/en-us\/products\/clinieco-medical-specimen-bags-6-9-inch-95kpa-certified-100-pack\"\u003eUN3373 95 kPa Specimen Transport Bags\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003ePacking\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e100 bags per pack · 10 packs per case (1,000 bags)\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eCliniEco Medical — Toronto. Distributed under MDEL #35334.\u003c\/em\u003e\u003c\/p\u003e","brand":"CliniEco Medical","offers":[{"title":"Bulk 10-Box","offer_id":49035569397982,"sku":"CLI-BAG-3W-1000","price":127.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/5741\/0526\/files\/SPECIMEN-HERO-logo-20261110_814f2028-deae-4138-97bc-ee55cb89d108.jpg?v=1794342106"},{"product_id":"specimen-container-120ml-sterile-screw-cap-100-pack","title":"Specimen Container 120 mL — 200 Containers (2 × 100-Pack Case)","description":"\u003cp\u003eTwo 100-packs make the case, 200 containers in all, and the bag these containers are meant to travel in is the \u003ca href=\"\/en-us\/products\/clinieco-medical-specimen-bags-6-9-inch-95kpa-certified-100-pack\"\u003e6 × 9 inch 95 kPa specimen transport bag with document pouch, 100-pack\u003c\/a\u003e — primary container inside, secondary bag outside, which is the pairing a sending laboratory checks first.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/en-us\/blogs\/medical-supply-guide\/where-to-buy-specimen-container-120-ml-walk-in-clinics-vancouver\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/5741\/0526\/files\/specimen-container-120ml-sterile-screw-cap-100-pack.png?v=1789817751\" alt=\"Specimen Container 120 mL — 200 Containers (2 × 100-Pack Case)\" width=\"480\" height=\"480\" loading=\"lazy\"\u003e\u003c\/a\u003e\u003c\/p\u003e\u003ch2\u003eWhat does one 120 mL specimen container cost in the 2-pack?\u003c\/h2\u003e\n\u003cp\u003eThe 2-pack is $59.98 for 200 containers, which puts a single container at about 30 cents — 59.98 divided by 200 is 0.2999 — and one 100-pack at $29.99, half the 2-pack price. That per-container figure is the one to compare against a rejected sample: a container that leaks in transit costs a second collection, a repeat appointment and a re-run at the bench, which is why the closure matters more than the unit price does.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVolume:\u003c\/strong\u003e 120 mL\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCap:\u003c\/strong\u003e Screw cap, threaded, leak-resistant\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGraduations:\u003c\/strong\u003e Moulded side-wall graduations\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polypropylene\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSterility state:\u003c\/strong\u003e Sterile, single use\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePack format:\u003c\/strong\u003e 100 per pack, 200 per 2-pack\u003c\/p\u003e\u003ctable\u003e\n\u003ccaption\u003eWhat the 2-pack contains, and the per-container arithmetic\u003c\/caption\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eElement\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolume\u003c\/td\u003e\n\u003ctd\u003e120 mL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCap\u003c\/td\u003e\n\u003ctd\u003eScrew cap, threaded, leak-resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGraduations\u003c\/td\u003e\n\u003ctd\u003eMoulded side-wall graduations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePolypropylene\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSterility state\u003c\/td\u003e\n\u003ctd\u003eSterile, single use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack format\u003c\/td\u003e\n\u003ctd\u003e100 per pack, 200 per 2-pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eSample collection and transport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2-pack SKU\u003c\/td\u003e\n\u003ctd\u003eCLI-SPEC-120-2PK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2-pack price\u003c\/td\u003e\n\u003ctd\u003e$59.98, about 30 cents a container\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhich specimens belong in a 120 mL container, and what has to travel with it?\u003c\/h2\u003e\n\u003cp\u003eThe 120 mL body is the size most clinics keep for urine work — a midstream clean-catch sample fits with room to spare, and the moulded graduations make the fill volume readable without a separate measuring step. Stool and sputum samples that the receiving laboratory accepts in a plain screw-cap container travel the same way. What changes is the packaging around it: Category B shipments move as triple packaging, with a leak-proof primary, absorbent material and a secondary package rated to hold a 95 kPa pressure differential, which is a separate purchase from the container itself.\u003c\/p\u003e\n\u003ch2\u003eHow many containers should a clinic hold, and how is the 2-pack split?\u003c\/h2\u003e\n\u003cp\u003eCount send-outs, not patients. A practice posting 20 samples a week gets through a 100-pack in about five weeks, so the 2-pack is roughly two and a half months at that rate and the risk shifts from running out to letting stock sit past its shelf life. Split the 2-pack between two collection points rather than opening both packs on one shelf, label each pack with its open date, and reorder when the second pack is opened. Group buyers and laboratories sending in volume can place a standing line instead of single packs.\u003c\/p\u003e\n\u003cp\u003eMonthly send-out volumes are easier to see on the \u003ca href=\"\/en-us\/pages\/clinic-supply-planner\"\u003esend-out volume planner\u003c\/a\u003e; \u003ca href=\"\/en-us\/pages\/compliance-log-center\"\u003ecollection and chain-of-custody templates\u003c\/a\u003e print from the compliance log centre, where the sterilization log generator covers the reusable side of the same workflow. Standing orders and purchase-order terms are at \u003ca href=\"\/en-us\/pages\/wholesale\"\u003eour clinic ordering desk\u003c\/a\u003e, and specimen-handling questions can be answered in writing by the \u003ca href=\"\/en-us\/pages\/sterilization-compliance-consultation\"\u003ecompliance desk\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe importer of record for this container is CliniEco Medical, which holds MDEL #35334 and supplies lot documentation when a quality system asks for it.\u003c\/p\u003e\n\u003cp\u003eA 120 mL sterile specimen container with a screw cap, sold 100 per pack. The graduated side wall makes fill volume readable at a glance, and the threaded cap seals the sample for transport on the same day it is collected.\u003c\/p\u003e\n\u003cp\u003eThese containers suit urine, stool, sputum and general sample collection where the container must arrive at the bench leak-free and clearly labelled. The 120 mL body is the size most clinics keep for urine work: a urine collection container that takes a midstream sample for clean catch urine specimen protocols, with a graduated wall so the fill volume is readable and a screw cap that seals the container for transport. They are single use: no washing, no re-labelling, no cross-contamination between patients.\u003c\/p\u003e\n\u003ch2\u003eWho it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCommunity and hospital laboratories receiving transported samples\u003c\/li\u003e\n\u003cli\u003eFood, water and environmental testing labs that collect their own samples\u003c\/li\u003e\n\u003cli\u003eDental, medical and veterinary clinics that send specimens out\u003c\/li\u003e\n\u003cli\u003eLong-term care and home care teams collecting samples on site\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVolume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e120 mL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCap\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eScrew cap, threaded, leak-resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eGraduations\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMoulded side-wall graduations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMedical-grade polypropylene\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSterility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSterile, individually bagged where specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFormat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSingle use, 100 per pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIntended use\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSample collection and transport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eOrdering and compliance notes\u003c\/h2\u003e\n\u003cp\u003eFits standard specimen transport bags and rack systems. Pair with our 95 kPa specimen transport bags where your courier or lab requires secondary containment.\u003c\/p\u003e\n\u003ch2\u003eRelated reading\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-us\/products\/clinieco-medical-specimen-bags-6-9-inch-95kpa-certified-100-pack\"\u003e95 kPa specimen transport bags\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-us\/blogs\/medical-supply-guide\/food-testing-labs-in-canada-specimen-bag-and-sampling-guide\"\u003eFood testing labs in Canada: specimen bag and sampling guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-us\/blogs\/medical-supply-guide\/a-vancouver-labs-specimen-rejection-rate-turnaround-case-review\"\u003eA Vancouver lab's specimen rejection rate: case review\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBuying for a clinic, lab or care home?\u003c\/strong\u003e Order the case size online, or request a B2B quote for volume pricing, standing orders and purchase-order terms at \u003ca href=\"\/en-us\/pages\/wholesale\"\u003eCliniEco bulk quote\u003c\/a\u003e.\u003c\/p\u003e\n","brand":"CliniEco Medical","offers":[{"title":"2-Pack","offer_id":49081998016734,"sku":"CLI-SPEC-120-2PK","price":59.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/5741\/0526\/files\/specimen-container-120ml-sterile-screw-cap-100-pack.png?v=1789817751"},{"product_id":"petri-dish-100x15mm-sterile-polystyrene-500-case","title":"Sterile Petri Dish 100 × 15 mm — Polystyrene, 500\/Case","description":"\u003cp\u003eCase of 500, supplied sterile and empty, so each lab pours the medium it has already validated. Once a plate has been read it leaves as biohazard waste, which is why the bench set-up usually includes \u003ca href=\"\/en-us\/products\/clinieco-biohazard-medical-waste-bags-red-30-gallon-leak-proof\"\u003ered 30-gallon biohazard waste bags, 5 per pack\u003c\/a\u003e alongside the dish itself.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/en-us\/blogs\/medical-supply-guide\/which-sterile-petri-dish-100x15mm-nova-scotia-research-labs\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/5741\/0526\/files\/01_main_white_clean_0548b370-1483-457b-9599-53bb889432db.jpg?v=1791271727\" alt=\"Sterile Petri Dish 100 × 15 mm — Polystyrene, 500\/Case\" width=\"480\" height=\"480\" loading=\"lazy\"\u003e\u003c\/a\u003e\u003c\/p\u003e\u003ch2\u003eWhat is a 100 × 15 mm sterile petri dish used for?\u003c\/h2\u003e\n\u003cp\u003eA 100 × 15 mm petri dish is a round, shallow polystyrene dish measuring 100 mm across and 15 mm deep, supplied sterile and empty so that the laboratory pours a medium it has already validated. The format is two pieces: a base and a loose lid. That is what makes it workable on an open bench — the lid shields the agar surface while the plate is carried and read, and it can be lifted for inoculation without the dish being handled by the agar.\u003c\/p\u003e\n\u003cp\u003eThree kinds of work account for most of the volume a laboratory buys. Colony counts come first: in a pour plate or a spread plate each visible colony is read as one colony-forming unit from the dilution that was plated, so the useful thing about the dish is that it presents a flat, uniformly deep layer of medium that can be counted without parallax. Streak plates for isolation come second: the 100 mm surface divides into enough sectors that a loop can be drawn through successive quadrants and single colonies recovered from the last one. Air and surface sampling come third: a settle plate is left open for a fixed time in a room, and a contact plate is pressed onto a bench or a surface, and both are then incubated and counted the same way as any other plate.\u003c\/p\u003e\n\u003cp\u003eThe 100 mm diameter is the general-purpose size. It fits the stage or carousel of most automatic colony counters, it sits flat inside standard incubator racks and plate towers without overhanging the shelf, and it is the format that the largest number of written procedures name. For a laboratory that runs more than one method, that means one diameter on the shelf instead of several bought for occasional work.\u003c\/p\u003e\n\u003cp\u003eTwo limits are worth stating plainly, because they decide whether this is the right dish at all. It is polystyrene, so it is single use: polystyrene deforms at autoclave temperatures, and glass is the reusable option where a workflow is heat based. And it is sold empty — the medium, the additives and the pouring step belong to the laboratory's own procedure, not to the dish.\u003c\/p\u003e\n\u003ch2\u003eWhat does one 100 × 15 mm plate cost in a case of 500?\u003c\/h2\u003e\n\u003cp\u003eA case is $102.39 for 500 dishes, so one plate lands at about 20 cents: 102.39 divided by 500 is 0.20478. That is the number a plant or water laboratory needs when it costs a sampling programme, because a plate count series consumes dishes by the dozen before any incubation time is booked. The case price is the current price on this listing; the per-plate figure is arithmetic on it rather than a second price schedule, and it holds for every method that uses the same 100 × 15 mm format.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eParameter:\u003c\/strong\u003e Detail\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 100 mm diameter × 15 mm height\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polystyrene, optically clear\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLid:\u003c\/strong\u003e Vented, for gas exchange\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSterility state:\u003c\/strong\u003e Sterile, single use\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStacking:\u003c\/strong\u003e Not designed for stacking (vented lid)\u003c\/p\u003e\u003ctable\u003e\n\u003ccaption\u003e100 × 15 mm sterile dish: specifications and the per-plate arithmetic\u003c\/caption\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e100 mm diameter × 15 mm height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePolystyrene, optically clear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLid\u003c\/td\u003e\n\u003ctd\u003eVented, for gas exchange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSterility state\u003c\/td\u003e\n\u003ctd\u003eSterile, single use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStacking\u003c\/td\u003e\n\u003ctd\u003eNot designed for stacking (vented lid)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCase configuration\u003c\/td\u003e\n\u003ctd\u003e500 dishes per case\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eMicrobiological culture work\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eCLI-PETRI-100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCase price\u003c\/td\u003e\n\u003ctd\u003e$102.39, about 20 cents a plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eStandard 100 x 15 mm petri dishes in optically clear polystyrene, supplied sterile in cases of 500. The shallow profile and uniform wall thickness make colony counting and plate photography repeatable between operators.\u003c\/p\u003e\u003cp\u003eSold as empty, sterile dishes — agar and media are not included. That keeps the plate suitable for whichever prepared medium your lab already validates, and avoids the shipment and shelf-life problems that come with pre-poured plates.\u003c\/p\u003e\u003ch2\u003e100 × 15 mm specifications at a glance\u003c\/h2\u003e\n\u003cp\u003eThe table below carries the numbers a method writer or a purchasing officer usually needs before choosing a plate: the diameter, the depth, the surface available for growth, and how much medium it takes to reach a working depth. The growth area and the agar volume are the arithmetic of the format rather than a supplier claim, which is why they are useful when a procedure specifies a pour volume in millilitres instead of a depth in millimetres.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ccaption\u003e100 × 15 mm sterile petri dish: specification summary\u003c\/caption\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e15 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePolystyrene, optically clear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSterility state\u003c\/td\u003e\n\u003ctd\u003eSupplied sterile, single use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLid\u003c\/td\u003e\n\u003ctd\u003eVented, for gas exchange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGrowth area\u003c\/td\u003e\n\u003ctd\u003eAbout 69 cm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAgar volume at 3 mm depth\u003c\/td\u003e\n\u003ctd\u003eAbout 21 mL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTypical pour volume\u003c\/td\u003e\n\u003ctd\u003e15–20 mL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCase configuration\u003c\/td\u003e\n\u003ctd\u003e500 dishes per case\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStacking\u003c\/td\u003e\n\u003ctd\u003eNot designed for stacking (vented lid)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eMicrobiological culture work\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eItem code\u003c\/td\u003e\n\u003ctd\u003eCLI-PETRI-100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eHow much agar goes into a 100 × 15 mm dish?\u003c\/h2\u003e\n\u003cp\u003eThe working rule is depth, not volume: a plate is poured to roughly 3 mm of medium, which is deep enough that colonies have room to develop their full shape and shallow enough that light still passes through for counting on a bright background. For a 100 × 15 mm dish the growth surface is about 69 cm², and 69 cm² at 3 mm works out to about 21 mL. In practice most methods pour somewhere between 15 mL and 20 mL, and the plate still reads correctly as long as the layer is even across the whole surface.\u003c\/p\u003e\n\u003cp\u003eWhy the thickness matters more than it sounds. A plate poured too thin dries at the edges during a long incubation, and colonies near the rim stop developing or merge into the drying front, which changes a count without anything being wrong with the sample. A plate poured too thick takes longer to set, holds more condensation under the lid, and puts the colonies further from the surface a counter or a camera is focused on — which matters when two operators read the same plate and are supposed to get the same number.\u003c\/p\u003e\n\u003cp\u003eThe figure is also the easiest way to cost a programme. If a method pours 20 mL per plate, a case of 500 dishes takes about ten litres of prepared medium, and that number belongs in the media-preparation plan next to the plate order rather than being discovered on the day.\u003c\/p\u003e\n\u003cp\u003eWhat the dish does not decide is the medium. Whether the lab pours a general nutrient agar, a selective medium, or a chromogenic one, and what supplements go in, is set by the method being followed and validated; the dish only has to present it at a consistent depth. Plates should be left to set flat on a level surface, and the surface dried to whatever degree the procedure requires before inoculation.\u003c\/p\u003e\n\u003ch2\u003eWhich plate format do routine colony counts actually expect?\u003c\/h2\u003e\n\u003cp\u003e100 × 15 mm is the general-purpose format that most validated methods name for pour plates, spread plates and streak plates: the diameter gives a countable surface without crowding colonies, and the depth leaves room for a poured medium layer. Smaller formats exist for specific methods, so the rule is to match whatever the written procedure specifies rather than substituting. The vented lid allows gas exchange during incubation; keep the dish flat — a vented lid is not designed for stacking, so plates should not be stacked during incubation.\u003c\/p\u003e\n\u003ch2\u003e100 mm vs 90 mm vs 60 mm: which size should a lab order?\u003c\/h2\u003e\n\u003cp\u003eThree diameters cover almost everything a Canadian laboratory buys. The 60 mm (6 cm) dish is the small format: about 23 cm² of growth area, and a pour of roughly 7 mL at 3 mm. It is used where the plate itself is the sample — contact plates and small screening plates — and where the medium is the expensive part of the test, because a small plate spends a fraction of what a full-size plate spends per test. The 90 mm dish is the classic clinical and water laboratory format: about 57 cm² and roughly 17 mL, and the size most established methods were written around. The 100 × 15 mm dish is the larger general-purpose format: about 69 cm² and roughly 21 mL, with the extra surface and depth that routine plate counts and multi-sector streak plates benefit from.\u003c\/p\u003e\n\u003cp\u003eThe decision sequence that saves the most rework is: read the written method first, and order the diameter it names — a procedure validated on one size is not automatically equivalent on another. Then check the physical fit. If the laboratory counts on an automated instrument, the dish has to sit in that instrument's carrier, and the counter's calibration belongs to one diameter. If the incubator is full, stack height and shelf footprint decide how many plates a run can hold, and the difference between a 90 mm and a 100 mm footprint multiplied across a few hundred plates is real shelf space.\u003c\/p\u003e\n\u003cp\u003eAfter that, compare the arithmetic of the test rather than the price of the case. A larger plate carries more medium per test; a smaller plate carries less. Where a sample series needs a countable plate at each dilution, the size that lands the count inside the readable range with the fewest plates per sample is the cheaper one to run, whatever the case costs.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ccaption\u003ePetri dish diameters compared: growth area, agar volume and typical use\u003c\/caption\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003cth\u003eGrowth area\u003c\/th\u003e\n\u003cth\u003eAgar at 3 mm depth\u003c\/th\u003e\n\u003cth\u003eTypical use\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e60 mm (6 cm)\u003c\/td\u003e\n\u003ctd\u003eAbout 23 cm²\u003c\/td\u003e\n\u003ctd\u003eAbout 7 mL\u003c\/td\u003e\n\u003ctd\u003eContact and screening plates, teaching, methods where the medium is the main cost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003ctd\u003eAbout 57 cm²\u003c\/td\u003e\n\u003ctd\u003eAbout 17 mL\u003c\/td\u003e\n\u003ctd\u003eEstablished clinical and water methods written around this size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100 × 15 mm\u003c\/td\u003e\n\u003ctd\u003eAbout 69 cm²\u003c\/td\u003e\n\u003ctd\u003eAbout 21 mL\u003c\/td\u003e\n\u003ctd\u003eRoutine plate counts, multi-sector streak plates, environmental sampling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eOne practical note on mixing formats: if a laboratory keeps two diameters, the incubator, the counter and the media plan all have to handle both, and the labels have to say which is which. Standardising on one diameter for the routine work and buying the other only for the specific method it belongs to is usually the cheaper arrangement.\u003c\/p\u003e\n\u003ch2\u003eVented or non-vented: which lid for which work?\u003c\/h2\u003e\n\u003cp\u003eA vented lid has small gaps or raised ribs that let air move between the inside of the dish and the incubator, and that single feature decides most of the choice. Gas exchange keeps the atmosphere in the dish close to the atmosphere in the incubator, and it lets condensation escape instead of pooling on the lid and dripping onto the agar when the plate is moved or inverted.\u003c\/p\u003e\n\u003cp\u003eA non-vented lid closes that exchange down. That is what a slow-growing organism or a long incubation wants, because the plate does not dry out at the same rate, and it is what a sealed or wrapped plate needs when the point is to hold a modified atmosphere. It is also the safer choice whenever a plate leaves the building, because a plate in transit is a plate that can leak.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ccaption\u003eLid choice by working situation\u003c\/caption\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSituation\u003c\/th\u003e\n\u003cth\u003eLid\u003c\/th\u003e\n\u003cth\u003eWhy\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eShort incubation with daily reading\u003c\/td\u003e\n\u003ctd\u003eVented\u003c\/td\u003e\n\u003ctd\u003eGas exchange, less condensation on the lid, plates can be read without wiping\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLong incubation or slow-growing organisms\u003c\/td\u003e\n\u003ctd\u003eNon-vented, or vented and sealed once inoculated\u003c\/td\u003e\n\u003ctd\u003eSlows drying, holds humidity across the run\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransport or send-out to another site\u003c\/td\u003e\n\u003ctd\u003eNon-vented, bagged\u003c\/td\u003e\n\u003ctd\u003eContainment in transit, no leaking through vents\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShared incubator used by several people\u003c\/td\u003e\n\u003ctd\u003eVented, as the procedure states\u003c\/td\u003e\n\u003ctd\u003eConsistent atmosphere for every plate in the run, and the usual arrangement where plates are opened during reading\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWork that needs a modified atmosphere\u003c\/td\u003e\n\u003ctd\u003eNon-vented, sealed with a gas-generating system\u003c\/td\u003e\n\u003ctd\u003eThe seal is what keeps the atmosphere in place\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe dish on this listing has a vented lid, which is the arrangement routine plate counts and streak plates are normally run with. Where a method calls for a sealed plate, the seal is applied after inoculation and the vent then stops mattering — the plate behaves as a closed vessel from that point on.\u003c\/p\u003e\n\u003ch2\u003eHow do you keep plates sterile in storage, and how are they disposed of?\u003c\/h2\u003e\n\u003cp\u003eKeep the sleeve closed until the plate is needed, work from one sleeve at a time, and never return an opened plate to the sleeve — a lid that has been off on a bench is no longer sterile, and the medium will show it. These dishes are polystyrene and single use: they deform in an autoclave, so glass is the reusable option if the workflow is heat-based. After reading, plates go into the biohazard waste stream rather than general refuse, sealed in the bag the waste carrier accepts.\u003c\/p\u003e\n\u003cp\u003ePlate and consumable volumes for a sampling programme can be modelled on the \u003ca href=\"\/en-us\/pages\/clinic-supply-planner\"\u003esampling programme planner\u003c\/a\u003e; \u003ca href=\"\/en-us\/pages\/compliance-log-center\"\u003eculture and media-preparation templates\u003c\/a\u003e print from the compliance log centre, which also carries the sterilization log generator for the reusable glassware side. Laboratory and multi-site volumes are quoted at \u003ca href=\"\/en-us\/pages\/wholesale\"\u003eour clinic ordering desk\u003c\/a\u003e, and method or documentation questions can be raised with the \u003ca href=\"\/en-us\/pages\/sterilization-compliance-consultation\"\u003ecompliance desk\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eCliniEco Medical brings this dish into Canada under MDEL #35334, and lot documentation is available with the case.\u003c\/p\u003e\n\n\n\u003ch2\u003eHow should plates be labelled, stored and incubated?\u003c\/h2\u003e\n\u003cp\u003eLabel the base, not the lid. Lids get swapped between plates on a busy bench, and a plate whose identity lives on the lid is a plate that can be counted against the wrong sample. A workable minimum is the date poured, the medium, the sample identifier and dilution, and the initials of the person who poured or plated it — written on the base with a marker that survives the incubator and, if the plate is stored, the fridge.\u003c\/p\u003e\n\u003cp\u003ePrepared plates are stored inverted at 2–8 °C, in their sleeve or a sealed bag, and brought back to room temperature before use so that condensation does not form on the agar when the lid comes off. Inverting them in storage keeps any condensation that does form on the lid rather than on the medium. First in, first out: the oldest sleeve is used first, and the date on the base is what decides which one that is.\u003c\/p\u003e\n\u003cp\u003eIncubation is inverted as well, for the same reason — a plate that sits lid-up collects water on the inside of the lid, and when it is moved to a counter that water lands on the agar and smears colonies together. The temperature is whatever the method names; clinical work is commonly run near body temperature, environmental and food work at lower temperatures over a longer period, and the number in the procedure is the one that applies rather than a general figure.\u003c\/p\u003e\n\u003cp\u003eReading and recording: count from the underside against a suitable background, note the dilution, and record anything that made the plate hard to read — a drying edge, a spreading colony, an obvious contaminant. Plates with contamination are recorded rather than quietly discarded, because a run of contaminated plates is a signal about technique or about the incubator. After reading, the plate is biohazard waste: it goes into the waste stream the receiving carrier accepts, sealed, not into general refuse.\u003c\/p\u003e\n\u003cp\u003eNone of the above replaces local procedure. Handling, storage limits and record retention are set by the laboratory's own standard operating procedure and by provincial requirements, and those take precedence over any general guidance on a product page.\u003c\/p\u003e\n\u003ch2\u003eWhat documentation should come with a case?\u003c\/h2\u003e\n\u003cp\u003eTraceability starts with the lot number. The case and its inner sleeves carry a lot reference from the manufacturer, and that reference is what links a plate on a bench back to the batch it came from — which is the question that gets asked when a count looks wrong, or when an auditor wants to know what was used on a given date. Record the lot number when the case is opened and keep it with the plate records rather than leaving it on the carton.\u003c\/p\u003e\n\u003cp\u003eFor the batch documentation itself — the sterilization information and the lot record issued for that batch — ask us and we will pass on what the manufacturer provides for the lot you received. That is a request per batch, not a certificate that ships inside every case, so if your quality system requires a document on file before use, raise it when the order is placed and keep the reply with the batch record.\u003c\/p\u003e\n\u003cp\u003eOn arrival, three checks are worth doing before the case goes on the shelf: the number of cases and sleeves against the packing document, the condition of the cartons and of the sleeve seals, and whether the lot reference on the cartons matches the lot reference on the sleeves inside. A damaged sleeve is a plate that is no longer sterile; it should be set aside and reported rather than pushed to the back of the shelf.\u003c\/p\u003e\n\u003cp\u003eWhere a laboratory is accredited or audited, the plate supplier is part of the record: the item code, the lot, and the date received are the three fields an auditor is most likely to ask for, and all three are on the carton when it arrives.\u003c\/p\u003e\n\u003ch2\u003eWho it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFood and beverage plant microbiology labs running routine plate counts\u003c\/li\u003e\n\u003cli\u003eEnvironmental and water testing laboratories\u003c\/li\u003e\n\u003cli\u003eSchool, college and university teaching labs\u003c\/li\u003e\n\u003cli\u003eCompounding pharmacies and clinics performing sterility checks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow many cases should a lab order at a time?\u003c\/h2\u003e\n\u003cp\u003eWork from weekly usage, not from the case size. One case holds 500 dishes, so a laboratory that plates 100 dishes a week is holding about five weeks of supply in a single case; at 250 a week the same case lasts a little over one week. That arithmetic is the whole calculation, and it is worth doing once because the answer decides both how often the order is placed and how much shelf space the plates occupy.\u003c\/p\u003e\n\u003cp\u003eTwo things pull in opposite directions. Ordering too little means a run is delayed for want of a plate, which is the failure mode that costs the most because the sample is already in hand. Ordering too much means sleeves sit at the back of a shelf for months, in a stack that gets moved and squeezed every time something is taken out — and polystyrene sleeves that have been handled repeatedly are not the ones to trust for a critical count. A stock level of roughly four to six weeks of use, reviewed against actual usage rather than the original estimate, is the usual compromise.\u003c\/p\u003e\n\u003cp\u003eStorage is part of the same decision: plates are kept in their original sleeves, in a dry place, off the floor, and rotated so the oldest sleeve is used first. Where the laboratory runs more than one method, the case count per method should be sized separately, because the methods rarely consume plates at the same rate.\u003c\/p\u003e\n\u003cp\u003eFor laboratories and multi-site groups placing standing orders, the case size is also the unit that makes the paperwork simple: 500 per case means quantities are whole cases rather than part sleeves, and a purchase order can be written in the same unit the shelf is stocked in.\u003c\/p\u003e\n\u003ch2\u003eOrdering and compliance notes\u003c\/h2\u003e\n\u003cp\u003ePair with inoculating loops, spreaders and colony counters for a complete bench set-up. If your workflow uses pre-poured or pre-prepared plates with agar, that is a separate product family with its own supply and regulatory treatment.\u003c\/p\u003e\n\u003ch2\u003eRelated reading\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-us\/blogs\/medical-supply-guide\/food-plant-microbiology-lab-starter-supply-checklist\"\u003eFood plant microbiology lab: starter supply checklist\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-us\/blogs\/medical-supply-guide\/usp-71-sterility-testing-explained-what-pharmacies-and-compounding-labs-need-to-know\"\u003eUSP 71 sterility testing explained\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-us\/blogs\/medical-supply-guide\/your-food-plants-microbiology-lab-sampling-sterilization-verification-and-record-keeping\"\u003eMicrobiology lab: sampling, verification and record-keeping\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-us\/blogs\/medical-supply-guide\/sterile-petri-dishes-handling-labelling-and-incubation-basics\"\u003eSterile petri dishes: handling, labelling and incubation basics\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-us\/blogs\/medical-supply-guide\/petri-dish-sizes-canadian-labs-bulk-ordering-case-counts\"\u003ePetri dish sizes for Canadian labs: bulk ordering and case counts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-us\/blogs\/medical-supply-guide\/vented-vs-non-vented-petri-dishes-for-clinic-labs\"\u003eVented vs non-vented petri dishes for clinic laboratories\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBuying for a clinic, lab or care home?\u003c\/strong\u003e Order the case size online, or request a B2B quote for volume pricing, standing orders and purchase-order terms at \u003ca href=\"\/en-us\/pages\/wholesale\"\u003eCliniEco bulk quote\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eRelated articles\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-us\/blogs\/medical-supply-guide\/where-to-buy-sterile-petri-dish-100x15mm-saskatchewan-labs\"\u003eWhere to Buy Sterile Petri Dish 100 × 15 mm for Diagnostic Laboratories in Saskatchewan\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"CliniEco Medical","offers":[{"title":"Default Title","offer_id":49039185969374,"sku":"CLI-PETRI-100","price":159.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/5741\/0526\/files\/01_main_white_clean_0548b370-1483-457b-9599-53bb889432db.jpg?v=1791271727"},{"product_id":"sterile-centrifuge-tubes-15ml-500-case","title":"Sterile Centrifuge Tubes 15 mL — Graduated, Screw Cap, 500\/Case","description":"\u003cp\u003eTwenty bags of 25 sit in the case, and the larger sibling in the same family is the \u003ca href=\"\/en-us\/products\/sterile-centrifuge-tubes-50ml-500-case\"\u003e50 mL sterile centrifuge tubes, 500 per case\u003c\/a\u003e — identical cap thread, identical resin, a different working volume. Most benches end up holding both, because the tube you pick is set by the volume of the sample, not by the rack.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/en-us\/blogs\/medical-supply-guide\/sterile-centrifuge-tubes-bulk-order-canada-case-sizes\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/5741\/0526\/files\/01_main_white_clean_a0d9c788-033e-4e97-9191-84ef70415241.jpg?v=1791271742\" alt=\"Sterile Centrifuge Tubes 15 mL — Graduated, Screw Cap, 500\/Case\" width=\"480\" height=\"480\" loading=\"lazy\"\u003e\u003c\/a\u003e\u003c\/p\u003e\u003ch2\u003eWhat does one 15 mL tube cost when the case is $59.99?\u003c\/h2\u003e\n\u003cp\u003eThe case is $59.99 for 500 tubes, so a single tube works out at about 12 cents: 59.99 divided by 500 is 0.11998. The case also breaks into 20 bags of 25, which puts one bag at about $3.00 — 59.99 divided by 20. Bag-level arithmetic is the one that survives contact with a real bench, since nobody opens a case at a time; the bag is the unit you actually consume, and the tube is the unit you put on a cost-per-test line.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eParameter:\u003c\/strong\u003e Detail\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWorking volume:\u003c\/strong\u003e 15 mL, moulded graduations\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCap:\u003c\/strong\u003e Leak-proof screw cap\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInner pack:\u003c\/strong\u003e 25 tubes per bag\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCase configuration:\u003c\/strong\u003e 500 tubes, 20 bags to the case\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSterility state:\u003c\/strong\u003e Sterile, single use\u003c\/p\u003e\u003ctable\u003e\n\u003ccaption\u003e15 mL tube: what one case contains, and how the per-tube figure is reached\u003c\/caption\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking volume\u003c\/td\u003e\n\u003ctd\u003e15 mL, moulded graduations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCap\u003c\/td\u003e\n\u003ctd\u003eLeak-proof screw cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner pack\u003c\/td\u003e\n\u003ctd\u003e25 tubes per bag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCase configuration\u003c\/td\u003e\n\u003ctd\u003e500 tubes, 20 bags to the case\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCost per bag\u003c\/td\u003e\n\u003ctd\u003eAbout $3.00 (59.99 divided by 20)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSterility state\u003c\/td\u003e\n\u003ctd\u003eSterile, single use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePolypropylene\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCentrifugation\u003c\/td\u003e\n\u003ctd\u003eRated for standard bench centrifugation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCase SKU\u003c\/td\u003e\n\u003ctd\u003eCLI-CTUBE-15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCase price\u003c\/td\u003e\n\u003ctd\u003e$59.99 per case, about 12 cents a tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhen does a 15 mL tube hold the sample, and when do you step up to 50 mL?\u003c\/h2\u003e\n\u003cp\u003eRoutine serum and plasma work, small aliquots, short spins and anything that will be split into secondary tubes belong in 15 mL: the tube fills to a workable fraction, the pellet forms at the bottom rather than smeared up the wall, and the pipette reaches the liquid without a long reach down. Step up to the 50 mL size when the volume itself is the sample — pooled urine, larger aspirates, tissue transport fluid, a prep that would overfill a smaller tube. Because both sizes share a cap design, the same racks and carriers serve both.\u003c\/p\u003e\n\u003ch2\u003eHow do you keep the rest of the case sterile after the first bag is opened?\u003c\/h2\u003e\n\u003cp\u003eOpen the bag, not the case. Carry one bag to the bench, take what the run needs, and close it again in the same shift — a bag left open collects bench aerosol, and the tube inside was manufactured sterile for a reason. Write the open date on the bag, keep the case closed and off the floor, and never tip unused tubes back into a bag they came out of. A tube that has touched a bench and then re-enters the bag is no longer sterile, whatever the label says.\u003c\/p\u003e\n\u003cp\u003eCase and bag quantities for a month of runs can be laid out on the \u003ca href=\"\/en-us\/pages\/clinic-supply-planner\"\u003emonthly case planner\u003c\/a\u003e; the \u003ca href=\"\/en-us\/pages\/compliance-log-center\"\u003esterilization and bench log templates\u003c\/a\u003e print from the compliance log centre, which also holds the sterilization log generator for the loads these tubes go into. Multi-site or laboratory-volume orders are handled at \u003ca href=\"\/en-us\/pages\/wholesale\"\u003eour clinic ordering desk\u003c\/a\u003e, and any question about your own sample-handling protocol can be put in writing to the \u003ca href=\"\/en-us\/pages\/sterilization-compliance-consultation\"\u003ecompliance desk\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eCliniEco Medical imports this tube into Canada under Medical Device Establishment Licence #35334; lot paperwork travels with the case on request.\u003c\/p\u003e\n\u003cp\u003eGraduated 15 mL centrifuge tubes with leak-proof caps for sample processing, centrifugation and storage — a monthly reorder item in every busy lab.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVolume:\u003c\/strong\u003e 15 mL, moulded graduations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap:\u003c\/strong\u003e Leak-proof screw cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e 25 per bag, 500 per case\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSterility:\u003c\/strong\u003e Sterile, single use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Medical-grade polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentrifugation:\u003c\/strong\u003e Rated for standard bench centrifugation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eCliniEco Medical imports and distributes this product as a Health Canada medical device under Medical Device Establishment Licence #35334. Batch documentation available on request.\u003c\/em\u003e\u003c\/p\u003e","brand":"CliniEco Medical","offers":[{"title":"Default Title","offer_id":49039504474334,"sku":"CLI-CTUBE-15","price":59.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/5741\/0526\/files\/01_main_white_clean_a0d9c788-033e-4e97-9191-84ef70415241.jpg?v=1791271742"},{"product_id":"sterile-centrifuge-tubes-50ml-500-case","title":"Sterile Centrifuge Tubes 50 mL — Graduated, Screw Cap, 500\/Case","description":"\u003cp\u003eA case is 500 tubes in 20 sealed bags of 25, and it is the wider-mouth sibling of the \u003ca href=\"\/en-us\/products\/sterile-centrifuge-tubes-15ml-500-case\"\u003e15 mL sterile centrifuge tubes, 500 per case\u003c\/a\u003e — same screw cap, same resin, different working volume. Labs that run both keep one case of each within reach of the bench.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/en-us\/blogs\/medical-supply-guide\/sterile-centrifuge-tubes-bulk-order-canada-case-sizes\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/5741\/0526\/files\/01_main_white_clean_6d4015e4-2d08-4f9b-a8a1-4560386bf9d5.jpg?v=1791271749\" alt=\"Sterile Centrifuge Tubes 50 mL — Graduated, Screw Cap, 500\/Case\" width=\"480\" height=\"480\" loading=\"lazy\"\u003e\u003c\/a\u003e\u003c\/p\u003e\u003ch2\u003eWhat does one 50 mL sterile tube cost when the case is $89.99?\u003c\/h2\u003e\n\u003cp\u003eThe case is $89.99 for 500 tubes, which puts a tube at about 18 cents — 89.99 divided by 500, rounded to the nearest cent. That per-tube figure is the one to carry into a cost-per-sample sheet, because a bench does not consume cases, it consumes tubes. One bag holds 25, so a single bag covers a morning of processing and the rest of the case stays sealed. Both numbers above come from this listing: the case price is the current variant price, and the per-tube figure is arithmetic on it rather than a second price list.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eParameter:\u003c\/strong\u003e Detail\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWorking volume:\u003c\/strong\u003e 50 mL, moulded graduations on the wall\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClosure:\u003c\/strong\u003e Screw cap, leak-proof\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eResin:\u003c\/strong\u003e Polypropylene\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSterility state:\u003c\/strong\u003e Sterile, single use, no reprocessing step\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInner pack:\u003c\/strong\u003e 25 tubes per bag\u003c\/p\u003e\u003ctable\u003e\n\u003ccaption\u003eCase economics for the 50 mL tube: twenty inner bags, one per-tube figure derived from the case price\u003c\/caption\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking volume\u003c\/td\u003e\n\u003ctd\u003e50 mL, moulded graduations on the wall\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eScrew cap, leak-proof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResin\u003c\/td\u003e\n\u003ctd\u003ePolypropylene\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSterility state\u003c\/td\u003e\n\u003ctd\u003eSterile, single use, no reprocessing step\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner pack\u003c\/td\u003e\n\u003ctd\u003e25 tubes per bag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCase configuration\u003c\/td\u003e\n\u003ctd\u003e500 tubes, 20 bags to the case\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBench use\u003c\/td\u003e\n\u003ctd\u003eRated for standard bench centrifugation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCase SKU\u003c\/td\u003e\n\u003ctd\u003eCLI-CTUBE-50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCase price\u003c\/td\u003e\n\u003ctd\u003e$89.99 per case, about 18 cents a tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhich sample volumes belong in a 50 mL tube rather than a 15 mL one?\u003c\/h2\u003e\n\u003cp\u003eReach for the 50 mL when the volume itself is the point: pooled urine collections, larger aspirates sent whole to the bench, tissue transport fluid, and any prep where a 15 mL tube would be filled past the point where you can still mix or decant without touching the cap thread. Keep 15 mL for routine serum and plasma work, small aliquots and short spins, and you spend less per test. The two sizes share a cap design, so racks, labels and centrifuge carriers do not need a second protocol.\u003c\/p\u003e\n\u003ch2\u003eHow do you keep the remaining bags sterile once a case is opened?\u003c\/h2\u003e\n\u003cp\u003eOpen one bag, not the case. Take the bag to the bench, take out what the run needs, and close the bag again the same shift — a bag left open on a bench collects aerosol and dust that the tube inside was manufactured to avoid. Write the open date on the bag, keep the case closed and off the floor, and never tip unused tubes back into a bag they came out of. Anything that has left the bag and touched a bench should be treated as non-sterile and kept for non-critical work.\u003c\/p\u003e\n\u003cp\u003eSample containers for the same run sit on the \u003ca href=\"\/en-us\/pages\/clinic-supply-planner\"\u003eclinic supply planner\u003c\/a\u003e, printable bench records are on the \u003ca href=\"\/en-us\/pages\/compliance-log-center\"\u003ecompliance log centre\u003c\/a\u003e, and institutional volumes go through \u003ca href=\"\/en-us\/pages\/wholesale\"\u003eour clinic ordering desk\u003c\/a\u003e. Protocol questions about your own bench can go to \u003ca href=\"\/en-us\/pages\/sterilization-compliance-consultation\"\u003eour compliance desk\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eCliniEco Medical brings these tubes into Canada under MDEL #35334; lot paperwork is available when your quality system asks for it.\u003c\/p\u003e\n\u003cp\u003eSelf-standing 50 mL sterile tubes for higher-volume sample work — same day-to-day consumable as the 15 mL line.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVolume:\u003c\/strong\u003e 50 mL, moulded graduations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap:\u003c\/strong\u003e Leak-proof screw cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e 25 per bag, 500 per case\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSterility:\u003c\/strong\u003e Sterile, single use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Medical-grade polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentrifugation:\u003c\/strong\u003e Rated for standard bench centrifugation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eCliniEco Medical imports and distributes this product under Medical Device Establishment Licence (MDEL) #35334. Batch documentation available on request.\u003c\/em\u003e\u003c\/p\u003e","brand":"CliniEco Medical","offers":[{"title":"Default Title","offer_id":49039504834782,"sku":"CLI-CTUBE-50","price":89.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/5741\/0526\/files\/01_main_white_clean_6d4015e4-2d08-4f9b-a8a1-4560386bf9d5.jpg?v=1791271749"},{"product_id":"stool-collection-kit-sterile-100-pack","title":"Stool Collection Kit — Sterile, with Scoop \u0026 Label, 100\/Pack","description":"\u003cp\u003eEach pack holds 100 kits, every one sealed in its own bag, and the containers the lab receives at the other end are the \u003ca href=\"\/en-us\/products\/specimen-container-120ml-sterile-screw-cap-100-pack\"\u003e120 mL sterile specimen containers, 200 per case\u003c\/a\u003e. Kit out with the patient, container in at the bench: those are the two halves of the same collection chain.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/en-us\/blogs\/medical-supply-guide\/stool-collection-kits-what-the-clinic-gives-and-what-the-lab-accepts\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0797\/5741\/0526\/files\/01_main_white_clean_dd72c73e-96fb-4bab-bc04-bd512abf49cd.jpg?v=1791271757\" alt=\"Stool Collection Kit — Sterile, with Scoop \u0026amp; Label, 100\/Pack\" width=\"480\" height=\"480\" loading=\"lazy\"\u003e\u003c\/a\u003e\u003c\/p\u003e\u003ch2\u003eWhat is inside one stool collection kit, and what does a kit cost?\u003c\/h2\u003e\n\u003cp\u003eOne kit is a screw-cap container with a scoop built into the lid, a leak-proof closure and a patient label already on the body — the patient collects, writes their details, and the kit travels without a second piece of paper. The pack of 100 is $39.99, so a kit works out at about 40 cents, which is 39.99 divided by 100. Put that against the cost of a rejected sample that has to be collected a second time and the arithmetic stops being about the kit at all.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePack size:\u003c\/strong\u003e 100 kits, individually bagged\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eContainer:\u003c\/strong\u003e Screw-cap body with integrated scoop\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClosure:\u003c\/strong\u003e Leak-proof lid\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLabelling:\u003c\/strong\u003e Patient label on the container\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSterility state:\u003c\/strong\u003e Sterile interior, single use\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIntended use:\u003c\/strong\u003e Faeces specimen collection and transport\u003c\/p\u003e\u003ctable\u003e\n\u003ccaption\u003eWhat ships in the 100-kit pack, and what each part is for\u003c\/caption\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e100 kits, individually bagged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContainer\u003c\/td\u003e\n\u003ctd\u003eScrew-cap body with integrated scoop\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eLeak-proof lid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLabelling\u003c\/td\u003e\n\u003ctd\u003ePatient label on the container\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSterility state\u003c\/td\u003e\n\u003ctd\u003eSterile interior, single use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eFaeces specimen collection and transport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTest menu it supports\u003c\/td\u003e\n\u003ctd\u003eOccult blood, culture, parasitology\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack SKU\u003c\/td\u003e\n\u003ctd\u003eCLI-STOOL-100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack price\u003c\/td\u003e\n\u003ctd\u003e$39.99 per 100-kit pack, about 40 cents a kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhich stool tests does this kit suit, and which container does the lab want?\u003c\/h2\u003e\n\u003cp\u003eThe kit is a collection and transport vessel, so it suits the tests the receiving laboratory will accept a plain screw-cap container for: occult blood screening, enteric culture and parasitology. What changes between those is the handling after collection — a culture sample is expected at the bench quickly, while a parasitology sample may be split into preservative tubes on arrival. Ask your laboratory which container and which transport bag it wants before you order, because the answer is set by their accreditation, not by the kit.\u003c\/p\u003e\n\u003ch2\u003eHow many kits should a clinic hold, and how is a reorder placed?\u003c\/h2\u003e\n\u003cp\u003eMost clinics are surprised by how long 100 kits last: a family practice sending a few samples a week is looking at months, not weeks, so the risk is expiry and lost stock rather than running dry. Count kits against your actual monthly send-outs, keep one unopened pack as the buffer, and reorder when the second pack is opened. Multi-site groups, long-term care operators and laboratories sending in volume can place the order as a standing line through our ordering desk instead of logging single packs.\u003c\/p\u003e\n\u003cp\u003eWork out monthly collection volumes on the \u003ca href=\"\/en-us\/pages\/clinic-supply-planner\"\u003eclinic supply planner\u003c\/a\u003e, take the printable bench sheet from the \u003ca href=\"\/en-us\/pages\/compliance-log-center\"\u003ecompliance log centre\u003c\/a\u003e, and route group purchases through \u003ca href=\"\/en-us\/pages\/wholesale\"\u003eour clinic ordering desk\u003c\/a\u003e. For specimen-handling protocol questions, the \u003ca href=\"\/en-us\/pages\/sterilization-compliance-consultation\"\u003ecompliance desk\u003c\/a\u003e answers in writing.\u003c\/p\u003e\n\u003cp\u003eThe Canadian importer of this kit is CliniEco Medical, which holds MDEL #35334 and can supply lot documentation on request.\u003c\/p\u003e\n\u003cp\u003eComplete stool collection kits with scoop and labelling area — pairs with our specimen containers and transport bags.\u003c\/p\u003e\u003cp\u003eA single-use kit: the patient takes a stool sample into the screw-cap container with the integrated scoop, writes their details on the label, and the kit goes to the laboratory for faeces specimen collection, culture or parasitology testing.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e 100 kits, individually bagged\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e Container with integrated scoop, leak-proof lid, patient label\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSterility:\u003c\/strong\u003e Sterile interior, single use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e Stool specimen collection and transport (occult blood, culture, parasitology)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eCliniEco Medical imports and distributes this product under Medical Device Establishment Licence (MDEL) #35334. Batch documentation available on request.\u003c\/em\u003e\u003c\/p\u003e","brand":"CliniEco Medical","offers":[{"title":"Default Title","offer_id":49039504965854,"sku":"CLI-STOOL-100","price":39.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/5741\/0526\/files\/01_main_white_clean_dd72c73e-96fb-4bab-bc04-bd512abf49cd.jpg?v=1791271757"}],"url":"https:\/\/clinieco.ca\/en-us\/collections\/laboratory-consumables.oembed","provider":"CliniEco Medical","version":"1.0","type":"link"}